LIERONT Y8-001 Camera Bluetooth Speaker User Guide
- September 19, 2024
- LIERONT
Table of Contents
LIERONT Y8-001 Camera Bluetooth Speaker
PRODUCT IDENTIFICATION
Important Note
- Please read the manual before set up the camera, it will help you a lot and saving your times
- Please fully charge and reset the camera before first time use
- The camera can only be set up with 2.4g Wi-Fi network. (But you can use access live stream with 4G/5G network once you set it up with 2.4g first)
- Please format the Micro SD to FAT32 and install that when powered off
- Ensure the phone, router and camera is close enough when you`re ready to pair them. (the Wi-Fi signal should be strong enough)
- Reset can solve most of the problems well. (Press and hold the reset for about 10 seconds, and see the lights through the hole flashing to indicate that the reset is successful, then give it about a minute or 2 wait for the device to reboot )
- The camera default password is: 123456789
Mobile APP download
To download our mobile app, simply search for “Cloud365” in your app store.
How to add a camera
(Default Password:123456789)
When using the app for the first time, you will need to register by providing
your email or mobile phone number. Click the “Register” button to complete the
user registration and you can log in for start using the app .
Then, ensure the camera has power.After the WiFi is powered on (there is a button near the battery), the WiFi indicator will light on (Near the Bluetooth power button). wait 30-60 seconds, you can hear the device’s motor sound, the camera lens is rotating, which means camera is reboot, when id done, that camera is ready now. (If the camera does not working properly, please long press the Reset button to restore the factory settings).
Add smart camera
Addition of AP Hotspot added (Recommend This Method)
To add a camera using this method, follow these steps:
- Open the app and go to the homepage
- Click the “+” button, select “Intelligent Camera,” and then choose “Addition of AP Hotspot”
- Follow the wizard to connect to the WiFi with the “Cloud_XXXX” field, then enter app, and click “Next” after a successful connection
- Select the WiFi network (router) that you want to connect to, enter the password, and click “Confirm” Wait for the app to display “Addition success” to confirm that the network configuration is complete.
Scan code to add
To add a camera using this method, follow these steps:
- Then connect the mobile phone to WiFi ;
- Open the app and go to the homepage
- Click the “+” button, select “Intelligent Camera,” and then choose “Scan Code to Add”
- Make sure the “Device is powered on” box is checked, enter your WiFi password, and click “Next”
- Hold your phone screen up to the camera lens, keeping a distance of 10-20 cm and minimizing any shaking
- Wait for the app to display “Addition success” to confirm that the network configuration is complete.
Features
Live preview interface
By clicking the Operation button, you can enter the operability interface, in which the night vision mode simply switches the display to black and white. It is not a night vision effect (the device does not have night vision lights), despite being described as such. In reality, it does not provide true night vision functionality.
Rotating Lens (PTZ)
By clicking the PTZ button, you can enter the camera control interface. You
can rotate the lens by clicking the dial on the screen.
Video playback
Reminder: Cloud video playback needs to be purchased and paid before it can be
used. A: Select “Playback” at the bottom right corner of the live interface to
view the playback video of the camera. B: Switch playback path, you can choose
to watch cloud playback/memory card playback.
Watching videos on multiple screens (only applicable to multiple devices under the same account)
On the device list, click the “Multi-split screen” button in the upper right corner, then you can watching videos on multiple screens
Screen inspection
In the device list, click the “Screen Inspection” button, or in the “Mine”
interface, click the “Screen Inspection” button If you currently have a device
that supports the purchase of value-added services, click “Buy Now”, select
the device, and make payment.
When it is detected that there are “abnormal brightness”, “abnormal color
cast”, “video loss”, “blurred video”, “stripes”, and “snowflakes” on the
screen of the device, a test report will be generated. push message Enter the
“Screen Abnormal Inspection” interface, select the corresponding device, and
you can view the inspection report
Smart reminder
In the device list, click the “Smart Alert” button, or in the “My” interface,
click the “Smart Alert” button If there is currently a device that supports
the purchase of value-added services, click “Buy Now”, select the device, and
make payment.
When someone appears, use cloud AI analysis to filter invalid alarms for you,
reduce corresponding false alarms, and provide you with effective and accurate
alarms Enter the “Smart Reminder” interface, select the corresponding device,
and you can view the test report
Phone reminder
To enable phone reminder, click the “Phone Reminder” button on the device list
or on the “Mine” page. If there is a device that supports purchasing value-
added services, click “Buy Now,” select the device, and make the payment.
Once the phone reminder service is activated, the platform will immediately
call the set phone number to notify you when suspicious activity is detected
by the device’s alarm through intelligent analysis.
FAQ
-
Why WIFI The connection method cannot add the device?
-
Please make sure that the device has powered and have been restored to factory settings before adding the device (Long press the reset button waiting the WiFi indicator light flash,then wait 30-60s or more, the camera lens will rotating, when it done, means camera is ready now).
-
The camera only supports 2.4GHz WiFi signal, if it is a 5G route, please turn on the dual-band mode of the router and select the 2.4G signal.
-
Make sure that the distance between the router and the camera is within a reasonable range.
-
Why is the recording intermittent?
The cloud service trial package, the alarm recording package and the TF card event recording mode will only record when the camera detects that the camera has moved, so the recording may not be continuous. -
Choose to record continuously or intermittently after inserting the TF card?
Make sure that the video viewing channel is selected as SD card, and format the SD card first . If it is still intermittent, it may be that the SD card has a bad pixel.
2 If it is lost once or twice a day, about 2 minutes at a time, it is the camera to release the memory and restart.
It is normal imagination. -
Why can’t my phone receive alarm messages?
(Turn on “Humanoid detection” and “Notice” feature) -
Confirm that the notification push permission of the APP in the mobile phone settings is turned on, and then turn on the message notification in the notification settings of the APP , and the current time is not in the planned time period for stopping the notification. Under normal circumstances, when an abnormality is detected, a message will appear in the notification bar of the mobile phone. Whether there is a sound or vibration depends on the settings of the mobile phone.
-
When viewing the real-time screen in the APP , you will not receive an alarm from the camera you are watching, because the default user is focusing on the monitoring screen at that time, and there is no need for an alarm. Using advanced intelligent alarm push algorithm, alarm messages will not be pushed frequently, but the camera will record and record all alarm messages.
-
What should I do if the camera is disconnected?
First confirm whether the power supply and network are normal, and then power off and restart the camera if there is no problem. If it is still disconnected after restarting,
please remove the camera in the APP and add it again. -
Why can’t the shared account operate the camera?
For security reasons, the permissions of the shared account are restricted, and the device cannot be operated. If others want to operate the camera, they can log in directly with the bound account and password. -
Need to change WIFI How to connect a camera ?
Two methods: -
camera does not change the place and can search for another WIFI , in the parameter setting menu >> change the WIFI connected to the device >> change the corresponding WIFI
-
The camera has changed places and cannot find another WIFI , so reconfigure the camera
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.