PAPER ROADS Bikepacking Ranger Harness Installation Guide
- September 10, 2024
- PAPER ROADS
Table of Contents
PAPER ROADS Bikepacking Ranger Harness
Specifications:
- Material : Durable webbing straps and velcro
- Features : Handlebar webbing straps, foam spacers, ladder locks, plastic loops
- Usage : Designed to securely attach and carry items on your bicycle handlebars
Installation:
- Undo the webbing straps from the rear ladder lock and release from the front plastic loop. Open up the velcro straps.
- Position the harness under your handlebars, ensuring cables are tucked between or around the foam spacers. Arrange cables without bending them at acute angles. Secure velcro straps once satisfied.
- Feed the webbing straps over the velcro, through the plastic loops, and double back towards the ladder locks behind the foam spacers.
- Hold each webbing strap tight, feed it through the bottom slot in the ladder lock, then back through the middle slot. Tighten as much as possible and tuck excess into the top slot in the ladder lock.
- Ensure foam spacers and strap are in a slot that allows the load to rest against the head tube. Attach the webbing strap around your head tube and tighten.
- To load your dry roll, strap it to the harness using the middle webbing strap, then tighten up the Voile straps. Tuck any excess length into the strap holders.
FAQ:
Q: Can I use this harness for heavy loads?
A : The Ranger Harness is designed to carry moderate loads. Please
ensure you do not exceed the recommended weight capacity for safety.
Q: How do I clean the harness?
A : Use a damp cloth with mild soap to gently clean the harness. Avoid
harsh chemicals that may damage the material.
Read User Manual Online (PDF format)
Loading......