Sunco Lighting AST-CP02B LED Canopy Light Fixture Owner’s Manual

Sunco Lighting AST-CP02B LED Canopy Light Fixture

FEATURES

• 240W large gas station light for high ceiling
• 140lm/watt lighting efficiency, total output 33600lm
• Mounting J-box greatly help installation and maintenance
• Corrosion and rust proof
• IP65 rated
• DLC listed and 50,000 hours life time

SUITABLE APPLICATIONS

• Gas Station Lighting

CONSTRUCTION:

• Heavy die-cast aluminum alloy housing with white powder-coated finish

OPTICAL SYSTEM:

• High Lumen lumileds LED chips
• 110° beam angle with clear PC cover

WARRANTY:

5-year limited warranty. Actual performance may differ as a result of end-user environment and application.

ELECTRICAL:

• Available as 120-277V input
• -4°F to 113°F

INSTALLATION & MOUNTING:

• Ceiling mounting/conduit pipe pole mounting for easy installation

PERFORMANCE:

Model No| Power Factor| Wattage| Voltage/Current Input| Light Efficiency| Kelvin Options
---|---|---|---|---|---
120V| 277V
AST-CP02B-240WSAA-ab| 0.9| 240W| 2.00A| 0.86A| 140LM/W| 5700K

Electric Characteristic

Dimension

Distribution Diagram

LDS-CPNHO-240W-120V-57K

Installation Instruction

Cautions:

1. Can not use the electric generator to test the LED light.
2. Please abide by related country, regional and local law and regulations when install this fixture.
3. Please turn off the power before installation or maintenance.
4. Proper earth grounding is required to ensure safety.

Notice:

1. To avoid possibility of electrical shock or fire, the installation personnel must have professional electric knowledge.
2. Please wear gloves to avoid injury before installation.
3. lf any smoke or spark of the wire happened, please turn off the power immediately and notify relevant personnel.

Attention:

1. Please check if there is any damage during shipping. lf so, please contact manufacturer timely.
2. Please read the installation instruction carefully to check whether all the accessories are complete. After confirmation, then install the fixture according to installation steps.

Installation Steps:

1. Screw the aluminum pipe into the heatsink. **(Figure 1)

**

2. Screw the safety rope to heatsink by screwdriver. (Figure   **2)

**

3. Drill the installation hole accordingly on the ceiling. **(Figure 3)

**

4. Lock the safety rope to the ceiling, assemble the installation plate to the aluminum pipe, then install led fixture. **(Figure 4)

**

5. Take the driver box apart by screwdriver. **(Figure 5)

**

6. Assemble the 3/4 pipe nut to the aluminum pipe (fix the height and direction of driver box), across the DC connector through driver box, then screw the driver box onto the aluminum pipe. **(Figure 6)

**

7. Connect the DC connector of led fixture with driver’s DC connector. Remove the holes of the driver box if necessary. **(Figure 7)

**

8. Connect the led fixture to local power with necessary connector protection measures. **(Figure 8)

**

9. Finally, assemble the driver box. **(Figure 9) (Figure 10)

**

Documents / Resources

| Sunco Lighting AST-CP02B LED Canopy Light Fixture [pdf] Owner's Manual
AST-CP02B-240WSAA-ab, LDS-CPNHO-240W-120V-57K, AST-CP02B LED Canopy Light Fixture, AST-CP02B, LED Canopy Light Fixture, Canopy Light Fixture, Light Fixture, Fixture
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>