XL-504UBD Electronic Components

“`html

Product Information

Specifications

• Model: XL-504UBD F5

• Appearance dimension: F5/5.85.08.7*28mm

• Luminous color and colloid: Blue brightness White /Blue
  colloid

• ROHS Environmental protection products meet ROHS
  requirements

• MSL: 4-5 Moisture sensitivity level

• Long operating life

• High energy efficiency, fast startup

• Low voltage DC drive

Product Usage Instructions

Electrical Characteristics

The product has the following electrical characteristics:

• Consumed power: 70mW
• Max Continuous Forward Current: 20mA
• Peak Forward Current: 80mA
• Operating ambient temperature: Ta=25°C
• Storage ambient temperature: Tstg
• Forward Voltage: 2.8V

Product Application

The product is suitable for various applications including:

• Home appliances, digital, communication
• Automotive Electronics
• Lighting decoration
• Electronic toy
• Electronic clock
• Traffic instructions
• Medical beauty instruments
• Electronic teaching equipment
• Urban lighting

FAQ (Frequently Asked Questions)

Q: What are the storage recommendations for the LED?

A: It is recommended to store the LED in an environment with a
temperature not exceeding 30°C and relative humidity not exceeding
70%. For longer storage, use a drying box with desiccant or filled
with nitrogen.

Q: What are the typical applications of this LED?

A: The LED can be used in various applications such as home
appliances, automotive electronics, lighting decoration, electronic
toys, traffic instructions, medical beauty instruments, electronic
teaching equipment, and urban lighting.

“`

XL-504UBD F5
characteristic

• : F5/5.85.08.728mm Appearance dimension: F5/5.85.08.728mm : / Luminous color and colloid: Blue brightness White /Blue colloid ROHS Environmental protection products meet ROHS requirements * MSL:4-5 Moisture sensitivity levelMSL : 4-5 levels
• EIA
  EIA standard packaging

• Long operating life

• High energy efficiency, fast startup

• Low voltage DC drive
  product application

• ; Home appliances, digital, communication Automotive Electronics Lighting decoration electronic toy electronic clock Traffic instructions Medical beauty instruments Electronic teaching equipment Urban lighting

Technical Data Sheet

1

Electrical Characteristics………………………………………………………………………………………………3
Typical Characteristic Curves……………………………………………………………………………………………………..5 Outline Dimensions……………………………………………………………………………………………………………………..6 Packaging……………………………………………………………………………………………………………………………………. 7
Precautions……………………………………………………………………………………………………………………… 8
2

Electrical Characteristics

Absolute Maximum RatingsTa=25

Parameter

Symbol

Rating

Unit

Consumed power

Pd

70

mW

Max Continuous Forward Current

IF

20

mA

Peak Forward Current
Operating ambient temperature
Storage ambient temperature

IFp Topr Tstg

80

mA

-20°C ~ +85°C

-40°C ~ +85°C

Welding conditions

Tsol

reflow soldering240°C6s manual welding 300°C3s
3.5mm

Initial Electrical Optical CharacteristicsTa=25

Parameter

Symbol Min.

Typ. Max.

Unit

Luminous Intensity
Dominant Wave Length

Iv

2000

/

3000

mcd

d

460

/

470

nm

Peak Wave Length

p

/

470

/

nm

Forward Voltage

VF

2.8

Viewing Angle

2Ø1/2

/

Spectral Width at half height

/

Reverse Current

IR

/

3.2

3.4

V

25

/

deg

30

/

nm

/

10

A

Test
conditions IF=20mA
IF=20mA
IF=20mA
IF=20mA
IF=20mA
IF=20mA
VR=5V

3

: Brightness grading
Code C2

Min 10000

: Voltage grading

Code

Min

N13-4

3.0

N13-5

3.2

N13-6

3.4

: Wave Length grading

Code

Min

HB04

460

HB05

465

HB06

470

Max 12000

Unit

Test conditions

mcd

IF=20mA

Max

Unit

Test conditions

3.2

3.4

V

IF=20mA

3.6

Max

Unit

Test conditions

465

470 475

nm

IF=20mA

4

Typical Characteristics Curves
5

Outline Dimension
(Note) 1. Dimensions are in millimeters. 2. ± 0.10mm . Tolerances unless mentioned are ± 0.10mm.
6

Packaging

• In Bags

• Moisture Proof and Anti-Electrostatic Foil Bag
  7

1
Precautions (1)
1. APPLY LEDLED This LED can be used in some ordinary electronic equipment, such as office equipment, communication equipment, house decoration, if LED is used in some high reliability requirements, such as air transportation, traffic control and medical liao equipment, must refer to the information provided by sales.
2. Keep in storage LED3070% LED Storage environment of LED with temperature not exceeding 30 and relative humidity not exceeding 70%.It is recommended that LDE be used in the original box for no more than three months. If longer storage time is required, put it in the drying box and add desiccant or filled with nitrogen.
3. Clean 3 Special care must be taken when cleaning colloids with chemicals, as some chemicals have damage to the colloidal surface and cause fading such as trichloroethylene, propylene, ketone, etc.It can be wiped and soaked with ethanol for no more than 3 minutes at room temperature.
4. Feet assembly
12 It must be 2 mm from the colloid to bend the bracket. 2 Support forming must be done with fixtures or by a professional. 3 Support forming must be completed before welding. 4 The pins and spacing are the same as on the circuit board. 5LEDPCBLED Welding must be performed at normal temperature and when LED is normally welded to the PCB plate, avoid applying mechanical pressure at LED pins at a minimum.
8

2 Precautions (2)

5. Weld
2mmLED LED When welding, welding must be conducted below 2mm of colloid bottom. When welding, try to avoid soaking LED colloid. After welding, avoid adding external force on the pin or shaking LED colloid.

Soldering Temperature

Pre – heat 300 Max
Pre- heat time

100 Max 60sec.Max

Soldering time

3 sec.Max

Soldering Temperature Soldering time

240.Max 6sec.max

LED Excessive welding temperature and prolonged welding can lead to LED deformation and failure

6. Drive way LEDLEDALEDLED

In the current driving mode of LED, if LED is multiple in parallel, it is recommended to use line A and add a flow

limit resistance to each LED to ensure the consistent brightness of LED.

Circuit model A

Circuit model B

7. Electrostatic protection
LEDInGaN HBM<1000V<100V High increase of static electricity and current will damage LED. Use antistatic devices such as protective belts and gloves. Note: human discharge mode HBM <1000V; machine discharge mode <100V.
9

3 Precautions (3)
Others When handling the product, touching the encapsulant with bare hands will not only contaminate its surface, but also affect on its optical characteristics. Excessive force to the encapsulant might result in catastrophic failure of the LEDs due to die breakage or wire deformation. For this reason, please do not put excessive stress on LEDs, especially when the LEDs are heated such as during Reflow Soldering.
LED The epoxy resin of encapsulant is fragile, so please avoid scratch or friction over the epoxy resin surface. While handling the product with tweezers, do not hold by the epoxy resin, be careful.
Safety Advice For Human Eyes LED LED Viewing direct to the light emitting center of the LEDs, especially those of great Luminous Intensity, will cause great hazard to human eyes. Please be careful.
10

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>