UbiqiSense UPA-1 PoE Adaptor User Manual
- August 31, 2024
- Ubiqisense
Table of Contents
UPA-1 PoE Adaptor
“`html
Product Information
Specifications for UPA-1
- Network USB Port Operational conditions
- Power
- Product dimensions
- Certification
- LED indicators
- Plug and Play
- Product Colour
- Surge protection
- Ethernet interface type
- Ethernet LAN data rates
- Networking standards
- Power over Ethernet (PoE)
- USB Cable length
- USB Type
- Operating relative humidity (H-H)
- Operating temperature (T-T)
- Storage temperature (T-T)
- Output current
- Power consumption (max)
- Power consumption (typical)
- Power over Ethernet (PoE) voltage
- Net Weight (Product, kg)
- Product length
- Product Height
- Product Width
- Warranty
Product Usage Instructions
Connecting the Device:
To connect the UPA-1, follow these steps:
- Connect the Type-C wire to the device.
- Connect the RJ45 network cable to the device.
LED Indicators:
The LED indicators on the device provide important
information:
-
A green light indicates that PoE is connected to the
device. -
A flashing yellow light indicates that the PoE data connection
is normal.
FAQ
Q: What do the LED indicators on the UPA-1 signify?
A: The green light indicates a connected PoE, while the flashing
yellow light signifies a normal PoE data connection.
Q: What are the operational conditions for the UPA-1?
A: The operational conditions include [specify conditions
here].
“`
Picture 1
UPA-1 User manual
The Type-c wire is connected to the device RJ45 connect the network cable
Picture 2
A green light indicates that POE is connected to the device The flashing
yellow light indicates that the POE data connection is normal
Specifications for UPA-1
Features
Network USB Port Operational conditions
Power
Product dimensions
Certification LED indicators Plug and Play Product Colour Surge protection Ethernet interface type Ethernet LAN data rates Networking standards Power over Ethernet (PoE) USB Cable length USB Type Operating relative humidity (H-H) Operating temperature (T-T) Storage temperature (T-T) Output current Power consumption (max) Power consumption (typical) Power over Ethernet (PoE) voltage Net Weight (Product, kg) Product length Product Height Product Width Warranty
CE/FCC Activity, Link Yes White Yes Gigabit Ethernet 10/100mbit/s ethernet included IEEE 802.3af Yes 2m USB-C,480Mbps 20 – 90 % 0 – 40 °C -20 – 70 °C 2A 13 Watt 10 Watt 5V 0.086 80.9mm 22.9mm 28.3mm 1 Year
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>