KNDAL LIGHTING INC PF265-9LPA Fixtures Pans Instruction Manual
- August 30, 2024
- KNDAL LIGHTING INC
Table of Contents
KNDAL LIGHTING INC PF265-9LPA Fixtures Pans
Specifications
- Brand: Kendal Lighting Inc.
- Model: PF265-9LPA
- Color Temperature Options: 3000K, 4000K, 5000K
- Number of Pieces:
- Mounting Plate: 1 pc
- Wall Plug + Screw : 3 pcs
- Gloves: 2 pcs
Product Usage Instructions
Mounting the Fixture
- Attach the mounting plate to the junction box and ceiling using the provided wall plugs and screws.
- Hook the fixture onto the safety cable rings on the mounting plate to secure it while making wiring connections.
Wiring Instructions
- Ground Wire (Copper or Green) – Connect to the ground terminal.
- Line Wire (Black) – Connect to the line terminal.
- Neutral Wire (White) – Connect to the neutral terminal.
Adjusting Color Temperature
This fixture is a 3CCT selectable model with a default color temperature
set at 3000K. To change the color temperature:
- Locate the switch on the fixture.
- Slide the switch to select between 3000K, 4000K, or 5000K.
Safety Instructions
- CAUTION: All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect the power at the circuit breaker or unplug it from the wall outlet before servicing.
Unpack your fixture, you should have the following items:
This fixture is a 3CCT selectable model. The default color temperature is 3000K. You can shift to 4000K or 5000K by sliding the switch. Before installation to ceiling, adjust fixtures to the desired length by pushing the wire up into the canopy, then coiling up excess wire, minor adjustments can be made after installation. To lower of lengthened wire, depress the button sleeve located where the wire comes out of the canopy.
USING INSTRUCTIONS
Attach the mounting plate to the junction box and ceiling with the wall plugs and screws provided.
Attach the hooks on the fixture to the safety cable rings in the mounting plate to help hold the fixture while making the wiring connections.
Connect the GROUND WIRE from the junction box to the GROUND (or GREEN) wire from the fixture with a wire nut. Connect the NEUTRAL WIRE from the junction box to the NEUTRAL (WHITE) wire from the fixture with a wire nut. Connect the LINE WIRE from the junction box to the LINE (BLACK) wire from the fixture with a wire nut.
Install the canopy to the mounting plate with cap nuts provided.
This fixture is designed to dim with a standard Triac forward phase dimmer.
Recommended dimmers:
Lutron MACL-153M, Lutron DVCL-153P, Lutron SCL-153P? , Or other compatible LED
dimmer controls. Wattage should not exceed 150 watts of product for a 600-watt
dimmer. Dimming levels will vary by dimmer.
Frequently Asked Questions
- Q: Can I install this fixture without the help of an electrician?
- A: For safety reasons, it is recommended that all electrical connections be done by a qualified electrician.
- Q: How do I know which wire is which during installation?
- A: The ground wire is typically either copper or green, the line wire is black, and the neutral wire is white. Always refer to the manual or seek professional help if unsure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>