Birlea Highgate 3 Door Wardrobe Installation Guide
- August 28, 2024
- Birlea
Table of Contents
**Birlea Highgate 3 Door Wardrobe Installation Guide
**
Thank you for purchasing a Birlea product
For a chance to win a Love2Shop voucher simply post a picture of your new product on your preferred social channels tagging Birlea Furniture. One winner will be selected at random each month.
Are you happy with your purchase?
Yes: That’s great, we would love to hear more from you. Please leave us a review on our Trust pilot link on the QR code here. Your feedback will be greatly appreciated.
No: If for any reason there is something missing, indifferent or incorrect with your order, please contact the retailer that you purchased your item from.
Please note that this items build time is around 1 Hour 30 minutes for 2 man build.
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR HIGHGATE 3 DOOR WARDROBE .
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
It is recommended that two people handle and assemble the item.
Birlea advise you use the wall straps provided to further enhance the safety of this product.
CARE & MAINTENANCE
Assemble in the room of use.
To avoid damages assemble the item on a soft, clean surface. Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition.
Keep any sharp objects away from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots, grains, clusters or indentations.
On unpacking the item you may notice an odour due to production processes but this will disappear after a period of time
DO NOT place the item next to a radiator or direct sunlight – this item is susceptible to temperature change. It is recommended an even room temperature be maintained with no sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item as marking will occur For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water, detergents, aerosol sprays or any polish as use of these materials would invalidate any claims.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
PARTS LIST
Carton 1 of 2:
| Part | Description | Qty |
|---|---|---|
| 1 | Top Panel | 1 |
| 2 | Left Panel | 1 |
| 3 | Right Panel | 1 |
| 9 | Fix Shelf Panel (small) | 1 |
| 12 | Left Post Panel | 1 |
| 13 | Right Post Panel | 1 |
| 14 | Top Post Panel | 1 |
| 15 | Bottom Post Panel | 1 |
| 17 | Back Panel | 2 |
| 18 | Back Panel | 1 |
Carton 2 of 2:
| Part | Description | Qty |
|---|---|---|
| 4 | Center Panel | 1 |
| 5 | Bottom Panel | 1 |
| 6 | Plinth Panel | 1 |
| 7 | Back Support Panel | 1 |
| 8 | Fix Shelf Panel | 1 |
| 10 | Top Support Panel | 1 |
| 11 | Top Support Panel (small) | 1 |
| 16 | Door | 3 |
HARDWARE LIST
Carton 2 of 2
| Part | Description | Qty |
|---|---|---|
| A | CAM NUT 15mm | |
| 31 | ||
| B | CAM BOLT | |
| 31 | ||
| C | WOOD DOWEL M6 x 25mm | |
| 44 | ||
| D | COUNTERSUNK SCREW M3.5 x 12mm | |
| 4 | ||
| E | COUNTERSUNK SCREW M4 x 16mm | |
| 38 | ||
| F | COUNTERSUNK SCREW M4 x 25mm | |
| 3 | ||
| G | COUNTERSUNK SCREW M4 x 65mm | |
| 8 | ||
| H | SCREW M4 x 22mm | |
| 6 | ||
| I | HINGES 7/8″ | |
| 6 | ||
| J | METAL BAR HANDLE 96mm | |
| 3 | ||
| K | PVC NAIL | |
| 4 | ||
| L | NAIL | |
| 40 | ||
| M | OVAL BRACKET | |
| 2 | ||
| N | OVAL PIPE (648mm) | |
| 1 | ||
| O | COUNTERSUNK SCREW M4 x 45mm | |
| 2 | ||
| S | HINGES 2/8″ | |
| 3 | ||
| T | DOOR STOPPER | |
| 2 |
WALL FIXING KIT
P| WASHER (M4)
| 4
Q| ANTI TIP STRAP
| 2
R| COUNTERSUNK SCREW M4 x 20mm
| 4
** You will need a screwdriver and a small mallet ( NOT provided)
Measure Tape
** WARNING: THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATEANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
Assembly Instruction
Insert hardware part A & part B using a screwdriver (not provided).
Insert hardware part C using a small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
| A | 4 |
|---|---|
| B | 14 |
| C | 4 |
Attach the Post Panel together (12), (13), (14) & (15) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Insert hardware part A & part B using a screwdriver (not provided).
Insert hardware part C using a small mallet (not provided).
Fix hardware M with screw D using screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
| A | 12 | |
|---|---|---|
| B | 3 | |
| C | 16 | |
| D | 2 | |
| M | 1 |
Attach Bottom Panel (5) to Center Panel (4) with screw O by screwdriver (not provided).
Attach Fix Shelf Panel (8) and Back Support Panel (7) to Center Panel (4) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
| O | 2 |
|---|
Insert hardware part A & part B using a screwdriver (not provided).
Insert hardware part C using a small mallet (not provided).
Insert hardware part K using a small mallet (not provided).
Fix hardware M with screw D using screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate
any claim.
| A | 9 |
|---|---|
| B | 6 |
| C | 12 |
| D | 2 |
| K | 2 |
| M | 1 |
Before attach Fix Shelf Panel (small) (9) to Center Panel (4) insert hardware
part B by screwdriver (not provided).
Attach Left Panel (2) to Bottom Panel (5), Fix Shelf Panel (8), Back Support
Panel (7)
and Top Support Panel (10) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate
any claim
| B | 2 |
|---|
Insert hardware part A & part B using a screwdriver (not provided).
Insert hardware part C using a small mallet (not provided).
Insert hardware part K using a small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate
any claim.
| A | 6 | |
|---|---|---|
| B | 5 | |
| C | 12 | |
| K | 2 |
Attach Right Panel (3) to Bottom Panel (5), Fix Shelf Panel (small) (9),
Plinth Panel (6)
and Top Support Panel (small) (11) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate
any claim.
Attach ALL Post Panel (12), (13), (14) & (15) to Left, Right &
Bottom Panel (2), (3) & (5) by screwdriver (not provided).
Fix both Top Support Panel (8) to Top Post Panel (14) using screw F by
screwdriver
(not provided).
DO NOT use any power tools as this may damage the frame and will invalidate
any claim.
| F | 3 |
|---|
Insert hardware part B using a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate
any claim.
| B | 1 |
|---|
Attach the Top Panel (1) to Left , Right Panel (2) , (3) ,
Center Panel (4), and Left and Right Post Panel (12) & (13)
using screw (G) By screwdriver (not provided).
Fix the Top panel (1) to Top Support Panel (10) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate
any claim.
| G | 8 |
|---|
Attach The Back Panel (17) & (18) using Nail (L) by screwdriver (not
provided).
Fix Anti tip strap (Q) with washer (P) and Screw (R) To Top Panel (1) by
screwdriver
(not provided).
DO NOT use any power tools as this may damage the frame and will invalidate
any claim.
| L | 40 | |
|---|---|---|
| P | 2 | |
| Q | 2 | |
| R | 2 |
** We strongly recommend you usethe anti tip straps to avoid the risk of serious injury
Fix hardware I & S with screw E using screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate
any claim.
| E | 18 | |
|---|---|---|
| I | 6 | |
| S | 3 |
Attach the Door (13) to Left, Right Panel (2), (3) and Center Panel (4) with
Hinges ( I ) & (S) using screw (E) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate
any claim
| E | 18 | |
|---|---|---|
| N | 1 |
** Refer to page 10 to adjust hinges
TO ADJUST YOUR DOORS TO MAKE THE GAPSMORE EVEN (OPTIONAL).
Step 14a
Adjust the door move in or out a little
Loosen the screw indicated a little, adjust the hinge to right position (see step 23b & 23c), then tighten the screw.
Step 14b
MOVE DOOR IN
Push the hinge back a little.
Step 14c
MOVE DOOR OUT
Push the hinge forward a little
Step 14d
To adjust the gap between door and side
Loosen or tighten the screw indicated a little to adjust the gap between door and leg (see step 23e & 23f).
Step 14e
MOVE DOOR RIGHT
Turn the screw clockwise a little as shown to make the gap big.
Step 14f
MOVE DOOR LEFT
Turn the screw counterclockwise a little as shown to make the gap small.
Step 14g
To adjust the gap between door and side
Loosen or tighten the screw indicated a little to adjust the door panel up & down (see step 23h).
Step 14h
MOVE DOOR UP & DOWN
Turn the screw clockwise a little and adjust the door panel up & down.
Fix Handle (J) to Door (13) using screw (H)
by screwdriver (not provided).
Fix Door Stopper (T) with Screw (E) To Bottom Panel (5) by screwdriver (not
provided).
DO NOT use any power tools as this may damage the frame and will invalidate
any claim.
| E | 2 | |
|---|---|---|
| H | 6 | |
| J | 3 | |
| T | 2 |
Fix Anti tip strap (Q) with washer (P) and Screw (R) to wall by screwdriver (not provided).
- Make sure it is firmly attached and make sure it is snug fit.
- Seek advice from a qualified trade person on how to attach this safety strap to your specific wall.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
| P | 2 | |
|---|---|---|
| R | 2 |
WARNING
In order to prevent overturning this product must be used the wall attachment device provided. Serious or fatal crushing injuries can occur from furniture tipping over. To help prevent topple over:-
- Use the wall attachment devices provided
- Never allow children to climb or hang on drawers or doors
- Do not overload the drawer beyond maximum recommended loading
- Place heaviest items in the lower drawers or shelves
- Unless specifically designed to accomodate, do not set TV’s or other heavy objects on top of this product
- Never open more than one drawer at a time
- Do not hang things from the doors
An attachment device is provided with your product, however you will need to
source suitable fixings for your wall type.
If in doubt consult a qualified trades person.
Always ensure that the wall to be drilled into is free from hidden electrical
wire, water and gas pipe.
Additional Information
- For complete product information, images and dimension diagrams please visit the website www.birlea.com
- If you have any issues with your item please contact the retailer directly you purchased it from who will be able to resolve anyissues with Birlea.
- Why don’t you send us photos of your assembled furniture to info@birlea.com to be shared in our #birleahome feature on lnstagram.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>