Lilly Pulitzer WSPKR Wireless Speakers User Manual
- June 3, 2024
- Lilly Pulitzer
Table of Contents
Lilly Pulitzer WSPKR Wireless Speakers
Quick Start Guide & User Manual
- Ultra thin powerful sound
- Micro USB port for charging
- Portable with Strap
- Unique cylinder design
SPECIFICATIONS
- Frequency Range: 1 OOHz-20KHz
- Operating Distance: 1 O meters
- Microphone: Bunt In
- Power Rating: 3W
- SNR: :.85+2 dB
- Charging Voltage: DC 5V
- Battery Capacity:400mAh
- Charge lime: Approx. 2 hours
- Playback lime: Approx. 6 hours loran in 50lli sound level
- Housing Material: ABS+ Metal+ Leatherette
KEY FUNCTION
- Pow On: Long press 2 seconds to tum on 1he speaker.
- Pow Off: Long press 2 seconds to tum off the speaker in Nan- Connection mode. If in paired mode. long press 2 seconds to cut off 1he existing connection first
- Arlette«/ End thecal: Short press to answer or end the phone call.
- Reject thecal: Long press 2 seconds to reflect the call while incoming.
- Redlallhe Cal: Double click to redial the last phone coll. 0.rl Offer
- Connell Clan: In paired mode, long press 2 seconds to cull off the existing wireless connection.
MAIN FEATURE
- Wireless 5.0
- Hands free speakerphone
WIRELESS PAIRING
Please charge speaker for 3 full hours prior to 1he landfall use.
McLee sure your cellphone (or medic player device) is wireless enabled.
Specific palr1ng steps may vary with different devices. Please refer to the
user manual of your device tor further informal flown.
- Be sire speaker is in power off mode. Place media device next to 1he speaker. Press& held the power button far 2 seconds lo enter pairing mode.
- Activate wireless on media device and select “Olly Speaker”‘ from 1he list. Enter ”OOOO” 11 media device prompts for a password·
- If pairing falls. remove all unused prior wireless connection from media device. Tumi off speaker and wireless cone clone and start again from Step 1.
Notice: When you turn on the speaker again, it will connect to your media device automatically as long as the wireless pairing is on on your device.
RECHARGING THE DEVICE
The wireless speaker is powered by a built-in rechargeable lithium battery that can be operated by the following steps:
- Connect the standard USB charging cable to a standard USB charging port such as computer or USB adapter from the DC 5V socket.
- A red LED is on while the unit is charging and off when the speaker is fully charged.
PACKAGE CONTENTS
wireless Speaker o USB Charging Cable o User Manual
PRODUCT FEATURE
TROUBLE SHOOTING
SAFETY INSTRUCTIONS
- Keep the speaker out of reach of children.
- Clean the speaker with soft cloth without using harsh corrosive chemicals. Always unplug from the power source before cleaning the device.
- Do not puncture or disassemble the exterior of the speaker in any way.
- Do not insert any metal object into the speaker.
- Do not expose the speaker to any excessive hear
- Keep out of water. Dry immediately if speaker gets wet.
FCC warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user authority to operate the
equipment.
Notes: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: If shielded cables or special accessories are required for compliance, a statement must be included which instructs the user to employ them, for example, shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
This device complies with CAN ICES-003(B)/NMB-003(B).