TQ PRO PROTL1000, 2063T Transmission Lifter 4×4/SUV Light Commercial Owner’s Manual
- August 22, 2024
- TQ PRO
Table of Contents
TQ PRO PROTL1000, 2063T Transmission Lifter 4×4/SUV Light Commercial
Product Information
Specifications
- Product Code: PROTSUNI
- Rated Maximum Capacity: 1,000KG*
- Models:
- PROTL1000, 2063T – Size: 160 x 145 mm
- PROTL500 & 2022T – Size: 475 x 465 mm
- Adjustments: 4 Way
- Intended Use: Removal and installation of transmissions
- Made in China to TQB Brands Pty Ltd specifications
- Website: www.tqbbrands.com.au
Product Usage Instructions
- Ensure you have read the transmission lifter’s owner’s manual and user instructions before using this product.
- Check the compatibility of this accessory with the following TQB Brands transmission lifters: PART NUMBER 2022T, PROTL500, 2063T, PROTL1000.
- Place the transmission saddle upgrade on the lifting platform saddle tilt securely.
- Adjust the size to fit the transmission model you are working on.
- Use the product for the intended purpose of removing and installing transmissions.
FAQ
-
Q: Can this product be used with other brands of transmission lifters?
A: No, this accessory is exclusively compatible with TQB Brands transmission lifters as mentioned in the compatibility statement. -
Q: What is the maximum weight capacity of this product?
A: The rated maximum capacity of this product is 1,000KG. Always refer to your transmission lifter’s capacity as well.
TRANSMISSION SADDLE UPGRADE
Professional Reputable Outstanding
WARNING
NOT DESIGNED FOR USE WITH: HEAVY COMMERCIAL VEHICLES
About the TQ Pro brand
TQ Pro top quality Tools and Equipment are designed and manufactured for
specialist professional use in a garage and workshop environment. TQ Pro
products are strong, reliable, and well finished for the expert tool user who
appreciates professional design, reliability, and attention to detail. Covered
by our 12month trade use warranty, our TQ Pro Tools & Equipment are made with
pride to deliver the best combination of professional performance,
presentation, and reliability.
Rated Maximum Capacity| Suits TQB Brands Models| Lifting Platform
Size (min-max)| Saddle Tilt Adjustments| Intended Use
---|---|---|---|---
1,000KG*| PROTL1000, 2063T, PROTL500 & 2022T|
- 160 x 145 mm
- 475 x 465 mm
| 4 Way| Removal and installation of transmissions
*SEE YOUR TRANSMISSION LIFTERS CAPACITY
Made in China to TQB Brands Pty Ltd specifications Visit us at
www.tqbbrands.com.au.
WARNING INFORMATION
- IMPORTANT: READ YOUR TRANSMISSION LIFTERS OWNERS MANUAL AND USER INSTRUCTIONS BEFORE USE
COMPATABILITY STATEMENT
THIS ACCESSORY IS EXCLUSIVELY COMPATIBLE WITH THE FOLLOWING TQB BRANDS
TRANSMISSION LIFTERS:
| PART NUMBER: | 2022T | PROTL500 | 2063T | PROTL1000 |
|---|---|---|---|---|
| MAXIMUM GVM: | <2,300KG | <2,500KG | <3,200KG | <3,500KG |
Features
- The saddle frame is constructed of superior-grade steel and built to premium standards for professional quality and durability
- The enlarged threaded rods paired with cantilevered handles allow for faster adjustments over standard saddle design resulting in higher efficiencies
- The four ratcheting securing pins are easily and quickly adjustable making transmission lifting safer & more secure
- Two tie-down straps included to safely secure the transmission to the saddle
- Four rounded tie-down points and holes in securing pins allow for added level of customisation to secure the load
- One removable saddle pin allows for accommodation of longer gearboxes
- Compatible with and for use on selected TQB Brands Transmission Lifters Only
Specifications
- Exclusively Fits The Following TQB Brands Models: PROTL1000; PROTL500; 2063T; 2022T
- Rated Maximum Capacity: 1,000kg (See your transmission lifter’s capacity)
- Lifting Platform Size: 160x145mm (475x465mm Max.)
- Forward Tilt: 11°
- Rearward Tilt: 11°
- Left Tilt: 9°
- Right Tilt: 11°
- Net Weight: 19kg
- Carton: 360 x 240 x 370mm
- Gross Weight: 22kg
PRODUCT Information
How to extend the life of your Transmission Lifter
10 Тор Tips
to extend the life of your TQB BRANDS Transmission Lifter
-
Open the breather valve prior to use. Opening the breather prior to operation ensures the efficient hydraulic operation of the lift ram and pump preventing pump and ram cavitation resulting in noor aeration and or possible hydraulic nil loss
-
Regularly lubricate the tilt adjust rods, pivot points. 2063T Lubrication of all pivots, pins, adjustors, and castor wheels ensures smooth operation during lifting and adjustment procedures while removing a transmission.
-
Regularly lubricate the castors axles & ball races to ensure smooth movement of the loaded jack.
-
Always store in the fully lowered position. Storage in the lowered position ensures the lift ram assembly is sealed from exposure to weather fluctuations and keeps the hydraulic ram seals in a relaxed condition ready to work when required.
-
Never use trans lifter for supporting loads. To ensure long life of the hydraulic lift ram seals, a load must not be supported above the fully lowered position. Once a transmission is removed from a vehicle the loaded transmission lift must be fully lowered where the internal mechanical travel stops can support the load. Transmission lifts must not be used for suspension support during repairs. Please use a suitable auxiliary stand for this purpose.
-
Centering the load on the platform.
Correct balance of the load is a critical factor where unbalanced loads can affect the smooth lowering and raising operation. Always consult your vehicle manufacturer specifications for the correct lift point when attaching transmission lifter to a transmission. -
Use correct model for intended application. The following chart explains model suitability based on GVM and Transmission type
-
Hazards and Obstructions.
All wheeled TQB Brands equipment must be used on smooth surface free of cracks, crevices and tripping hazards that can foul the wheels during operation or relocation. -
Read the user Manual thoroughly and keep a copy easily accessible.
The user’s manuals are important to the initial set up and ongoing maintenance and come with each transmission jack, they are also downloadable from our webpage at www.tqbbrands.com.au -
Visit our webpage for instructional videos.
We have created instructional videos for our range of transmission jacks which include bleeding procedures and product comparisons. You’ll find these at www.tqbbrands.com.au
WARRANTY
- TQ Pro products have been carefully tested and inspected before shipment and are guaranteed to be free from defective materials and workmanship for a period of 12 months from the date of purchase except where tools are hired out when the guarantee period is ninety days from the date of purchase.
- Should this piece of equipment develop any fault, please return the complete tool to your nearest authorised warranty repair agent or contact TQB Brands Pty Ltd Warranty team – warranty@tqbbrands.com.au.
- If upon inspection it is found that the fault occurring is due to defective materials or workmanship, repairs will be carried out free of charge. This guarantee does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe handling, alterations, accident, or repairs attempted or made by any personnel other than the authorised TQB Brands Pty Ltd repair agent.
- This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised.
- Your TQB Brands Pty Ltd guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the 12 month period.
- Consumer Guarantee
- Our goods come with a guarantee that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
- All images and illustrations shown are for reference purposes only. All information, specifications and illustrations in this manual are based on the latest information available at the time of publication and are subject to change without notice. The information in this manual is periodically revised to ensure the latest information is included. Download the latest version of this manual and other related technical documentation from www.tqbbrands.com.au.
Made in China to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au