hama 00 121770 4K HDMI Switcher Instruction Manual

August 17, 2024
Hama

hama 00 121770 4K HDMI Switcher

Thank you

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
The HDMI switching desk allows you to use three digital HDMI-compatible video SWITCHs with digital playback devices that support HDMI. The switch is specifically designed for use in home cinemas to operate, for example, a Blu- ray player and a satellite receiver at the same time on a playback device with Ultra-HD cinema quality.

OVERVIEW

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Controls and displays

HDMI switching desk

  1. Function LED (HDMI input 1-3)
  2. Power LED
  3. Infrared sensor
  4. SWITCH button (switching the HDMI inputs)
  5. USB port (for power supply

Package contents

  • HDMI switching desk
  • Remote control
  • Operating instructions

Safety Notes

  • The product is intended for private, non-commercial use only.
  • Use the product for its intended purpose only.
  • Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
  • Children should be supervised to ensure that they do not play with the device.
  • Do not bend or crush the cable.
  • Do not drop the product and do not expose it to any major shocks.
  • Dispose of packaging material immediately according to locally applicable regulations.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Do not use the product in the immediate vicinity of heaters or other heat SWITCHs or in direct sunlight.
  • Do not use the product in areas where the use of electronic devices is not permitted.
  • Keep the packaging material out of the reach of children due to the risk of suffocation.
  • Do not operate the product outside the power limits given in the specifications.
  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
  • Keep this product, as all electrical products, out of the reach of children!
  • Use the item only in moderate climatic conditions.

Warning – Batteries

  • When inserting batteries, note the correct polarity (+ and – markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
  • Only use batteries (or rechargeable batteries) that match the specified type.
  • Before you insert the batteries, clean the battery contacts and the polar contacts.
  • Do not allow children to change batteries without supervision.
  • Do not mix old and new batteries or batteries of a different type or make.
  • Remove the batteries from products that are not being used for an extended period (unless these are being kept ready for an emergency).
  • Do not short-circuit batteries.
  • Do not charge batteries.
  • Do not throw batteries in a fire.
  • Keep batteries out of the reach of children.
  • Never open, damage or swallow batteries or allow them to enter the environment. They can contain toxic, environmentally harmful heavy metals.
  • Immediately remove and dispose of dead batteries from the product.
  • Avoid storing, charging or using the device in extreme temperatures and extremely low atmospheric pressure (for example, at high altitudes).

Warning – Button cells

  • Do not ingest battery, risk of burns due to dangerous substances.
  • This product contains button cells. If swallowed, the button cell can cause severe internal burns within just two hours and lead to death.
  • Keep new and used batteries out of the reach of children.
  • If the battery compartment does not close securely, stop using the product and keep it out of the reach of children.
  • If you think that batteries were swallowed or are in a part of the body, seek medical assistance immediately

Functions

  • Easy to switch between up to 3 HDMI SWITCHs (e.g. Blu-ray player, receiver, computer, games console)
  • Quick and easy switching using a remote control
  • Automatic selection of the input SWITCH when switching on
  • No additional power supply required, the power is supplied via the connected devices
  • Supports 3D and 4K Ultra-HD resolution

Getting started and operation

  • Connect the SWITCH devices (e.g. Blu-ray player, receiver, computer, games console) to the HDMI inputs (input 1-3) using HDMI cables (not included in the delivery package). The LED that corresponds to the active input (1) lights up.
  • Now connect your output device (e.g. TV, projector, monitor) to the HDMI outputs using HDMI cables (not included in the delivery package).
  • Turn on the connected devices. The power LED (2) lights up.
  • You can now select all inputs via the remote control.
  • It is also possible to select the SWITCH directly on the HDMI switching desk using the SWITCH button (4).

Information about the power supply
In some cases, it may be necessary to provide the HDMI switching desk with additional power via the USB socket (5). To do this, connect a micro USB / USB cable to the USB socket (5) and a free USB port on your TV or a USB power adapter (5 V / 300 mA, not included in the delivery package).

Troubleshooting

Problem Solution
No picture
  • Ensure that all cables are correctly connected.
  • Check to be sure that all devices are switched on.
  • Make sure that the TV is set to the correct channel.
  • Connect the HDMI switch to the USB power supply.
  • In some cases, it may be necessary to provide the HDMI switching desk with additional power via the USB socket (5).

Poor picture, audio interruptions|

  • Ensure that all cables are correctly connected.
  • Try to connect the HDMI SWITCH directly to the output device. If nothing changes, you need to replace the SWITCH device.
  • Use a 1.4 HDMI cable
  • Your HDMI cable should not exceed a total length of 5 m.
  • Switch all devices off and then on again.

Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Technical Data

Connections 3 HDMI inputs 1 HDMI output
Supported resolutions 480i/480p/576i/576p/720p/ 1080i/1080p/2160p
HDCP version Compatible with HDCP 1.4 / 2.2
Supported audio formats DSD (Direct Stream Digital), HD (HBR)

Audio,7.1/5.1/2.1 CH, Dolby Audio, DTS, LPCM
Supported video formats| 12bit Full HD Video, 3D Video, 4K@30/60 Hz Ultra HD Video
SWITCH selection| Manually via the button on the device, automatically when switching on or via remote control
Power supply| From SWITCH device (HDMI input) via USB (5 V/300 mA)

CUSTOMER SUPPORT

Hama GmbH & Co KG
86652 Monheim /Germany
Service & Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,
and subject to technical changes. Our general terms of delivery and payment are applied


References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals