Sunco Lighting 45W LED Barn Light Owner’s Manual
- August 17, 2024
- Sunco Lighting
Table of Contents
Sunco Lighting 45W LED Barn Light
Product Specifications
- Cord protection board
- L Shape Cord protection board – 1
- Wall Mount (Standard) – 1
- Screws CM6*16-SS, Stainless Steel Hexagon flat head bolt – 2
- Screws Bracket Screws M6*60, Hexagon flanged bottom cross self-tapping screw – 3
- L Shape bracket – 1
- CM6*16-SS, Stainless Steel Inner Hexagon head bolt – 1
- Screws M6*60, Stainless Steel Expansion Screw – 4
- Screws CM6*40-SS, Stainless Steel Inner Hexagon head bolt – 1
- Arm Mount (Sold separately)
FAQ
- Q: Is the arm mounting kit included with the product?
- A: No, the arm mounting kit is sold separately as an accessory.
ACCESSORY LIST
Safety Information
WARNING
- Turn power off before inspection, installation or removal.
- The installation should be performed by qualified electricians or lighting technicians.
- Before conducting any installation, maintenance, or removal, disable all power to the luminaries and wait until the fixture cool down.
- Do not touch the fixture while it is in service.
- If there is any problem with the fixture, DO turn off power and DO NOT attempt repair unless you are a qualified technician or the customer service member.
- This luminaire is designed to operate in ambient temperatures ranging from -40’F to 104’F and to be horizontally mounted with the LEDs facing down.
- This product is not available for several special environments, such as places with corrosive gas liquids or high pressure water vapor.
Mounting Instructions
Wall Mounting
- Place mounting section of fixture onto desired mounting surface, mark and drill holes for mounting.
- Mount the fixture with bolts provided. Install the two bottom screws first.
- Place the fixture on the two bottom screws and install the top screw.
- Tighten the top screw first and then tighten the remaining screws.
- Make wiring connections in the fixture. (White to Neutral lead, Black to Line lead, Yellow Green to Ground lead)
- Put the cord protection bracket back on the fixture and fix it with screws provided.
- Installation is completed.
Arm Mounting (Optional)
- Remove the two poles and secure the two poles connections by the bolt provided as shown in the view.
- Using the mounting bracket provided to secure the pole to the wall and tighten the fixing screws.
- Lead the power supply cable and connect it to the fixture input cable. (White to Neutral lead, Black to Line lead, Yellow Green to Ground lead)
- Insert the fixture into the pole, fix the fixture to the light pole through the fitter clamp, and tighten the fixing screws.
- Check that the fixture is firmly installed.
- Installation Completed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>