Paslode 918227-1 18GA Cordless Straight Brad Finish Nailer User Guide
- August 15, 2024
- Paslode
Table of Contents
Paslode 918227-1 18GA Cordless Straight Brad Finish Nailer
Specifications
-
Cordless 18GA Straight Brad Finish Nailer
-
Drives up to 12,000 nails per charge
-
Compatible with Paslode 18GA Brad Nails (Part # 1 650212, 1-1/4
650213, 1-1/2 650214, 2 650215) -
Drives up to 1,200 nails with Paslode #816007 Finish Fuel
Product Usage Instructions
Initial Setup:
- Charge the battery for 1.5 hours before first use.
- Ensure the battery indicator shows “READY” before proceeding.
Nail Loading:
- Release the magazine cover and slide it open.
- Load Paslode 18GA Brad Nails towards the front of the magazine.
- Slide the cover forward and close it securely.
Fuel Setup:
- Use Paslode #816007 Finish Fuel only.
- Check the date on the bottom of the fuel cartridge.
- Open the fuel door by pushing it forward and lifting it back.
- Insert the fuel cell, position the fuel arm, and close the fuel door securely.
Nail Driving:
- Always wear eye and ear protection.
- Push the tool down on its no-mar probe.
- Pull the trigger to drive nails.
Depth Adjustment:
- Rotate the thumbwheel to adjust the depth of drive.
- Increment or reduce depth as needed for different materials.
Nail Jam Clearing:
- Remove the battery, fuel, and nails.
- Pull the quick clear latch forward to release.
- Open the front guide to release jammed nails and return driver blade.
- Close and latch the front guide securely.
FAQ
Q: What should I do if the nailer is not driving nails properly?
A: Check the depth adjustment setting and ensure proper nail loading. Clear any nail jams if necessary.
Q: Can I use nails other than Paslode 18GA Brad Nails?
A: It is recommended to use Paslode nails for optimal performance and safety.
Q: How often should I recharge the battery?
A: Recharge the battery when the indicator shows low battery or after extended use to ensure continuous operation.
INSTALLATION
Battery
Drives Up To 12,000 Nails Per Charge
Nails
Use Paslode 18 Ga. Brad Nails
Finish Fuel
Part #816007 Drives Up To 1,200 Nails
WARNING
Always wear EYE and EAR protection whenever working with or in the vacinity of
a Cordless tool in operation.
Finish Fuel, Continued
Drive Nails
Adjusting The Depth Of Drive
Clearing Nail Jam
For assistance call this number for all your questions.
USA
1-800-222-6990
7:00 AM-4:45 PM CST
© 2024, Illinois Tool Works Inc 918227-1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>