FAHRER 240116 Motor Cover Premium Instruction Manual
- August 13, 2024
- FAHRER
Table of Contents
FAHRER 240116 Motor Cover Premium
Specifications
- Product Name: Motor Cover premium
- Manufacturer: FAHRER
- Designed and handmade in Berlin
- Website:www.fahrer-berlin.de
Product Information
- The Motor Cover premium by FAHRER is designed to offer increased protection for your motor while riding your e-bike. It is a transport protection cover that needs to be removed before using the bike.
- The cover does not provide absolute protection and the the customer uses it at their own risk. FAHRER does not guarantee protection in all circumstances and will not repair or replace a damaged motor.
Product Usage Instructions
- Before using the product, ensure you have read and understood the entire manual provided.
- Remove the Motor Cover before riding the bike. Using the bike with the Motor Cover on is not allowed and increases the risk of injury.
- When carrying bikes on hitch racks or outside your car, make sure the Motor Cover is fixed properly to your bike before starting. Regularly check its proper seat during stops to prevent loss of the cover.
- Follow FAHRER mounting instructions and refer to the manual provided by your e-bike manufacturer for proper installation.
FAQ
Q: Can I use the bike with the Motor Cover on?
A: No, using the bike with the Motor Cover on is not allowed and increases the risk of injury.
Q: What should I do when carrying my bike on hitch racks?
A: Make sure the Motor Cover is fixed properly to your bike before starting and regularly check its proper seat during stops to prevent loss of the cover.
Q: Does FAHRER guarantee protection for my motor with the Motor Cover?
A: FAHRER does not guarantee protection in all circumstances and will not repair or replace a damaged motor.
INTRODUCTION
- Read and understand the entire manual BEFORE using the product!
- Save these safety warnings and any additional product information, manual, and packaging for future reference.
- NOTE: Manual illustrations are for demonstration purposes only. Illustrations may not reflect the exact appearance of the actual product. Specifications are subject to change without notice.
Usage
SAFETY WARNINGS
- The Motor Cover is a transport protection and has to be taken off before riding the bike!
- Using the bike with a Motor Cover is not allowed and is not possible and INCREASES THE RISK OF INJURY.
- When carrying bikes at hitch racks and outside your car:
- Make sure that the Motor Cover is fixed properly to your bike before starting.
- Regularly check the proper seat during stops. Improper installation may lead to loss of the cover and may cause injury or accidents.
FAHRER Limited Warranty
- The manufacturer warrants this product to be free of manufacturing defects for 90 days from the date of purchase.
- This Limited The warranty does not cover normal wear and tear, or any damage, failure, or loss caused by improper assembly, maintenance, storage, or use of the product.
This Limited Warranty will be void if the product is ever
- Used in a manner other than as expressly intended and described in this manual; or.
- Modified in any way.
- The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.
- For further information please refer to www.fahrer-berlin.de
Motor Cover premium
- Thank you for purchasing your new FAHRER Motor Cover. It is a quality product made to protect the motor of your e-bike during bike transport on the roof or the hitch/back door mounted carriers.
- During transport, the bike is exposed to splash and spray water that can enter the motor housing. By use of the Motor Cover, the direct water impact can be avoided.
- The Motor Cover is suitable for any e-bike with a center motor and can be adapted to individual frame and motor geometry.
- Correctly mounted the Motor Cover fits tightly to your motor and frame and doesn‘t cause scratches like loose bags in the airstream while driving.
- The Motor Cover is a transport protection and has to be taken off before riding the bike.
- The Motor Cover is not made to keep the motor housing dry as water like rain and bike wash don‘t cause damage either.
- The cover offers a heavily increased but not absolute protection of your motor. The customer uses the cover at their own risk.
- We do not guarantee the protection of your motor in all circumstances. Under no circumstances FAHRER will repair or replace a damaged motor.
- Please follow the FAHRER mounting instructions and the manual of your e-bike manufacturer.
- Further information: www.fahrer-berlin.de .
Exemplary mounting procedure:
- Motor Cover is a universal solution for all center motor e-bikes and can be adapted to any frame and motor geometry.
- The Cover ist supposed to be mounted from the left side of the bike.
- Open the hook-and-loop cover leash and straps and push the cover from below onto the engine.
- Lead the front strap over the crank and attach tightly to the loop area.
- Lead the back leash between the saddle tube and the back wheel over the chain and attach tightly to the loop area.
- If necessary adjust straps to improve seat of the cover.
- Pull the cover leash to the left sind above the engine and attach it tightly to the loop area.
- Once mounted completely check proper fit and safe fixture before and during transport.
- After use dry all parts. If necessary the cover can be washed by hand in cold water and soap.
- FAHRER – Individual Cycling Accessories.
- Designed and hand made in Berlin.
- www.fahrer-berlin.de
Documents / Resources
|
FAHRER 240116 Motor Cover
Premium
[pdf] Instruction Manual
240116, 1283, 240116 Motor Cover Premium, 240116, Motor Cover Premium, Cover
Premium, Premium
---|---
References
Read User Manual Online (PDF format)
Loading......