PE20 Patino 20 Pendant Light Instruction Manual
- August 13, 2024
- PATINO
Table of Contents
PE20 Patino 20 Pendant Light
Specifications
| Voltage | 240V |
|---|---|
| Frequency | 50Hz |
| Socket Type | E27 |
| Maximum Wattage | 25W |
| Number of Globes | 1 |
Important Notes
- Globe not included.
- Must be installed by a qualified electrical contractor.
- Install by AS/NZS 3000.
Product Installation Steps
- Ensure the power is turned off before starting the installation.
- Connect the live wire (L) to the terminal marked “L”.
- Connect the neutral wire (N) to the terminal marked “N”.
- Secure the lamp holder to the mounting surface.
- Attach the shade ring to the lamp holder.
- Insert the globe into the lamp holder.
- Turn on the power and test the installation.
Disclaimer
- Tools not included.
- A shade ring is attached to the lamp holder.
- Globe(s) not included.
INSTALLATION INSTRUCTION
- Item No. : PATINO PE20
FAQ
- Q: Is the globe included with the lamp?
- A: No, the globe is not included.
- Q: Who should install this lamp?
- A: It must be installed by a qualified electrical contractor.
- Q: What standards should the installation comply with?
- A: The installation should comply with AS/NZS 3000.
- Q: What tools are needed for installation?
- A: Basic electrical tools are needed, but they are not included in the package.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>