ESSICK EXCEL Residential Evaporative Cooler Owner’s Manual
- August 10, 2024
- ESSICK
Table of Contents
ESSICK EXCEL Residential Evaporative Cooler
Product Information
Specifications:
- Model: ESSICK SI-700S
- Type: Evaporative Cooler
- Manufacturer: Appliance Factory Parts
- Number of Models: 70
Product Usage Instructions
Assembly:
Follow the provided assembly instructions to set up your ESSICK SI-700S
evaporative cooler.
Operation:
Ensure the water tank is filled, and the unit is connected to a power source.
Turn on the cooler using the control panel.
Maintenance:
Regularly clean the water tank and filters to maintain the efficiency of the
evaporative cooler.
Storage:
When not in use, empty the water tank, clean the unit, and store it in a dry
place to prevent damage.
Shop genuine replacement parts for ESSICK SI-700S
Find Your ESSICK Evaporative Cooler Parts – Select From 70 Models
Standard Features of Thermostat
- Large LED readout is easy to read
- Easy 4-wire hook-up makes installation quick and simple
- Durable rain-proof control box ensures safety
- Thermostat controlled dump cycle adds convenience
- Dump cycle control is compatible with any pump!
- Two-stage operation provides better comfort and even temperatures
- Easy to program and operate
STANDARD FEATURES OF A COMFORTABLE EVAPORATIVE COOLER
All ComfortCool evaporative air coolers offer these standard features:
SPECIFICATION
SELECTING AN ESSICK EXCEL COOLER
- Consult zone map to find correct zone.
- Consult table below to find correct “minutes per air change” for your zone.
- Determine area to be cooled in cubic feet (building length x width x height).
- Divide cubic feet (step 3) by minutes per air change (step 2) to determine CFM.
- Select correct Essick Cooler model in the specifications table according to CFM and expected static pressure.
MINUTES PER AIR CHANGE
If CFM falls between models, choose the larger model.
Interior Heat Load: High means places with unusual heat sources from hot equipment or processes, crowded conditions, etc. Normal means no unusual heat sources – typical home or office.
Exterior heat Load: Exposed means walls, roof exposed to sun, poor insulation, etc. Insulated means walls and roof well insulated and/or shaded.
Example
A house in Phoenix AZ, 40 feet long by 30 feet wide with 8-foot ceiling.
Insulated, no unusual heat sources.
- 30 x 40 x 8 = 9,600 cubic feet
- Zone: 2
- Minutes per Air Change: 2
- 9,600 + 2 = 4,800 CFM
- Referring to specification chart,cooler model S1-500S/D with 3/4 h.p. motor is indicated .
FAQ
Q: How often should I clean the filters?
A: It is recommended to clean the filters of the ESSICK SI-700S
evaporative cooler every 2 weeks for optimal performance.
Q: Can I leave the unit running overnight?
A: Yes, you can leave the unit running overnight for continuous cooling.
Ensure proper ventilation in the room.
Q: What should I do if the unit stops working?
A: Check the power source, water level, and filters. If issues persist,
refer to the troubleshooting section in the owner’s manual.
5800 Murray, Little Rock, AR 72209 800-643-8341 www.essickair.com
References
- Repair Your Grill: Shop Replacement Parts for 24,880 Models
- Essick Evaporative Cooler Parts - Select From 70 Models