Pet Utobon YS-02 Smart Wireless Water Dispenser User Manual

Pet Utobon YS-02 Smart Wireless Water Dispenser

Product Usage Instructions

Installation

1. Soak the filter element in warm water for about 5 minutes before installation.
2. Rinse the drinking tray and water tank with clean water.
3. Pour clean, sanitary water into the water tank within the specified range (1~2.5L).
4. Place the filter element in its cavity.
5. Assemble the water dispenser top cover onto the water tank.
6. Position the drinking tray on top of the water dispenser.
7. Connect the nozzle, ensure stability, and turn on the water dispenser.

Daily Use
Indicator light Description:

1. To add water daily, fill the container directly into the dispenser without disassembling it.
2. To charge when the battery is low, open the USB port dust cover and connect the charging cable.

Daily Cleaning of the Water Pump

1. Clean the water pump every 1-2 months to extend its life.
2. Use clean water and a brush to clean the screen and impeller.

Switching Working Mode

• Filter Reminder:
  When the blue light is always on, replace the filter element. Press and hold the function key for 5 seconds after replacement to reset successfully.

• Timing Mode:
  In timing mode, the water pump works every 15 minutes for 15 seconds.

Sterilization and Sensing Modes

• UV Sterilization:
  Automatically sterilizes with UV light every 4 hours for 3 minutes.

• Sensing Mode:
  Automatically dispenses water for 15 seconds when a pet is detected.

• Standard Mode:
  The water pump continuously discharges water in standard mode.

FAQ

• Q: How often should I clean the water pump?
  A: It is recommended to clean the water pump once every 1-2 months to maintain its functionality.

• Q: What should I do when the filter reminder light is on?
  A: When the blue light is on, it indicates that the filter element needs replacement. Follow the reset instructions after replacing the filter.

Thank you for purchasing our pet water dispenser. Please read the instructions carefully before use.

Notice to users

• The product is only suitable for DC 5V/2A output power adapter, please use a suitable power adapter.
• Please read this manual carefully before use.
• Damage caused by incorrect use will void the product warranty.
• In case of changes, no further communication will be given and the company will have the right of the final interpretation

Use the safety instructions

• Failure to comply with the following terms may result in product unusability or other unexpected losses.
• Install and use the product strictly following the instructions.
• Please use this product selectively according to the actual situation of your pet.
• Please use it in a cool, dry place and away from fire sources.
• This product is in low voltage mode, but pets chewing on the wires may cause leaks. Please use it under the correct guidance.
• Please use a DC5V-2A power adapter that complies with national and regional standards, otherwise, it will damage the product or cause safety risks.
• Keep it in a horizontal position and do not overturn the product, otherwise the device may malfunction or water overflow.
• Do not rinse or immerse the operating parts of the top cover. Do not open the Type-C waterproof cap when cleaning and cleaning.
• Except when charging, be sure to cover the Type-C waterproof plug to avoid water damage to the components. Do not put the product in the dishwasher.
• If children use this device, be sure to use it under the guidance of an adult.
• Before heading out for a short vacation, be sure to check the remaining water level and battery status in the water dispenser.
• Please perform maintenance under the guidance of professionals to avoid various injuries. If you have any problems with the product, please contact customer service in time.

What’s In The Box

Overview

Specification

Instructions for Use

1. Before installation, soak the filter element in warm water for about 5 minutes.
   • During the process of soaking the filter element, it is normal for the precipitated water to be colorless or slightly yellow, but it cannot be drunk.
   • The top cover of the water dispenser contains batteries and other electronic components, do not immerse it.
2. Rinse the drinking tray and water tank with clean water.
   • It is strictly prohibited to put this product and its components into a dishwasher or other cleaning tools.
3. Pour clean, sanitary water into the water tank and control the water volume within the specified range (1~2.5L)
   • The water temperature requirement: is 5~450
4. Take out the filter element and place it in the filter element cavity.
5. Place the water dispenser top cover onto the water tank.
6. Place the drinking tray on top of the water dispenser.
7. Connect the nozzle, place the assembled water dispenser on a stable surface, turn it on and the water dispenser will start working.

Instructions for daily use

1. To add water to the water dispenser daily, simply hold the container and fill it into the water dispenser without disassembling it and adding water.
2. When the battery is low, open the dust cover of the USB port and connect the charging cable to charge it.

Daily cleaning of the water pump

1. It is recommended to clean the water pump once every 1-2 months, which can effectively extend the life of the water pump.
2. Use clean water and a brush to clean the screen and water pump impeller.

Switching the working mode

• Double-click the function button to turn on the phone. The default mode is sensor mode. Sensor mode flashes 3 times and then stays on. When an approaching pet is detected, the water pump runs for 15 seconds.
• Double-click the function key to switch and click again to switch to timing mode. The timing mode flashes 3 times and then stays on. The water pump runs for 15 seconds every 15 minutes.
• Double-click the function key to switch and click again to switch to standard mode. The standard mode flashes three times and then stays on, and the water pump runs continuously. (This mode requires a power connection)
• Double-click the function key to switch, then click the function key to turn off.
• When the power is connected, if you choose to work in standard mode, disconnect the power and automatically switch to induction mode.
• When the power is connected and the sensor mode or timed operation mode is selected, the power is disconnected and the operation mode remains unchanged.
• After the equipment is turned on, the cumulative time reaches 720 hours (30 days), the filter element reminder light stays on, and the filter element needs to be replaced. After replacement, long press the function button for 5 seconds, the indicator light will flash, and short press again to reset correctly, the filter element reminder light will go out and the timer will restart. Furthermore, the filter element can also be replaced according to daily usage.

Indicator light description

Power prompt: When the voltage is low, the function light flashes to indicate that charging is required. During the charging process, the function light breathes to indicate that the function light is on again when charging is completed.

Company: Foshan Zuoyoumo Electric Co., Ltd.

• Address: Room 702, Elevator 1, Building 4, Phase 9, Tianfulai Industrial Zone, Ronggui Street, Shunde District, Foshan City, Guangdong Province
• Service hotline: 18027671525 (service hotline).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>