Audo CO-TABLE 240×100 Co Dining Table Owner’s Manual
- August 7, 2024
- Audo
Table of Contents
Audo CO-TABLE 240×100 Co Dining Table
Congratulations with your new CO-TABLE designed by Norm Architects.
We hope you will enjoy using this item and follow these instructions to ensure correct assembly.
These instructions are provided for your safety. It is important that the instructions are read carefully and completely before assembling.
Component overview Co-Table 240×100
-
2 x Legs
-
2 x Rails
-
1 x Table Top
-
16 x M6 x 12 mm
-
12 x M6 x 16mm
Component overview Co-Table 140×70
-
2 x Legs
-
2 x Rails
-
1 x Table Top
-
16 x M6 x 12 mm
-
8 x M6 x 16mm
Tools Needed
- 1 x Allen key 5mm
Caution
It takes two people to assemble the table. Make sure to assemble on soft and
clean surface, such as the cardboard it comes in to avoid scratches.
Care and maintenance
Please see care instructions on www.audocph.com.
Caution.
Assemble on soft and clean surface.
Use the allen key and this screw to fasten the rails onto the table top.
Use the same allen key and rest of the screws to fasten the table legs to the rails.
Turn the table over onto the feet
Customer Support
audocph.com
@audocph
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>