DHgate YYK-Q16S Ear Mounted Wireless Headphones User Manual
- August 6, 2024
- DHgate
Table of Contents
DHgate YYK-Q16S Ear Mounted Wireless Headphones
Product Specifications
wireless version : V5.4
Talk time : 7-8 hours
Music playing : 7-8 hours
Standby time : 90 hours
Communication distance :≥10m
Charging time of headset : about 1.5hour
Headset battery capacity: 45mAh
Battery capacity of charging chamber: 500mAh
Frequency range : 2.40ghz-2.48-ghz
Support agreement :A2DP1.3/HFP1.6 HSP1.2/AVRCP1.6/D11.3
multiple use key
Pause/Play: Click the MFB key
Previous : Long press the L-side MFB key for 1 second
Next: Long press the R-side MFB key for 1 second
Volume plus: Double click the L-side MFB key
Volume reduction : Double click the MFB key on the R side
Answer the call: Click the MFB key
Hang up: Click the MFB key
Call rejection : Hold down the MFB key for 1 second
Cancel a call: Click the MFB key
Call Siri: Without playing a song Hit the left or right MFB key three
times
Cancel Siri: Click the left or right MFB key
Power on/of
-
When the headset is taken out of the charging cham ber for the first time The headset will turn on automati cally.
Put the headset back in the charging chamber and it will start charging and automatically shut down. -
When the headset is not in use, put it back into the charging chamber and turn it off automatically.
How to reset
In the disconnected state, double-click + hold down for 2 seconds and then power off. Reset is complete.
How to pair
- Take out the charging chamber to start the machine
- Automatic headset pairing
- Open the settings of mobile phone/tablet — Bluetooth — Open Bluetooth — Search— YYK-Q16S — pairing/connecting — playing music.
Computer/laptop pairing method
Open Computer Settings – Devices – Bluetooth and Other devices – Enable Bluetooth – Add Bluetooth Or other devices – Search for Bluetooth device YYK- Q16S- Pair/Connect – Play music.
Note: If the computer does not have Bluetooth, please plug in the Bluetooth adapter and download the Bluetooth driver Then normal use.
How to charge the headset
-
Put the headset into the charging compartment, the headset will automatically shut down and start charging.
The number in the middle of the display and the corresponding progress bar on the left and right side of the display light up, indicating charging Cang is charging the earphones. -
When the earphone is charging, the red light will be steady on, and the blue light will be off after 10 seconds.
Charge the charging chamber
Please use the mobile phone adapter to charge the charging chamber. You can use the computer Type-c cable Or other chargers with Type-c interface.
Safety precautions
For high-quality earphones, please refer to the following instructions to prolong the service life:
- Please keep away from high temperature, high humidity and corrosive environment.
- Please prevent the product from being hit, dropped, bent, soaked, etc.
- Please do not remove the headset or charging stand.
- Please do not allow the product to be overcharged all the time, so as to reduce the service life of the product.
- If it causes any discomfort or pain, please stop using this product.
- Use a DC 5V-1A adapter certified by a regulated manufacturer.
Repeated charging and discharging of the headset will cause the battery performance to decrease over time, which will affect all rechargeable Electronic products are normal.
There are
- Two Bluetooth headsets
- One charging base
- One Type-c charging line
- 1 manual
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>