puzhen PZ-PA196 North Star Diffuser Instruction Manual

: July 31, 2024
: puzhen

Table of Contents

puzhen PZ-PA196 North Star Diffuser
FAQ
Diagram
Operating Instructions
Functionality
Connect To App
Safety Instructions
Cleaning And Maintenance
Troubleshooting
Specifications
FCC STATEMENT
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

puzhen PZ-PA196 North Star Diffuser

FAQ

Q: What should I do if there is smoke or a burning smell from the diffuser?
- A: Unplug the diffuser immediately and discontinue use if this occurs.
Q: How often should I clean the diffuser?
- A: It is recommended to clean the diffuser weekly, especially when changing essential oils.
Q: Can I use multiple essential oils without cleaning in between?
- A: It is recommended to use separate nozzles for different essential oils to avoid cross-flavors. Spare nozzles are available for purchase.

Please read this user manual carefully before using this product

Diagram

Light
Handle
Speaker
DC power inlet
Timer indicator
Power on/off key
Music Bluetooth key
Music volume + key
Music volume – key
Mist indicator
Mist key
Atomization chamber
Light key
Non-slip mat
Type C plug
Power adapter
Bottle opener
Essential oil bottle
Nozzle air intake
Oil pipe

Operating Instructions

Press the atomizing chamber to make it automatically pop out, and then take it out.
Use the matching bottle opener to remove the inner stopper from the essential oil bottle.
Place the essential oil bottle into the atomization chamber.
Tighten the essential oil bottle counterclockwise onto the atomization chamber.
Align the markings on the atomization chamber with the markings on the diffuser. Press them vertically into the slot in the direction of the arrow.
Assemble the outer cover according to the markings. Connect the power supply.
Press the Power on/ off key and the Mist key to start diffuser working.

Functionality

Button	Function

| 1. Short press it to turn on the diﬀuser. The indicator light is candlelight. The default timing is 4H. It will automatically shut down after 4H.

2. Press it again to enter the timer for 8H. The light and mist status remain unchanged, but the timing is 8H. It will automatically shut down after 8H.

3. Press it again to enter the timer for 12H. The light and mist status remain unchanged, but the timing is 12H. It will automatically shut down after 12H.

4. Press it again to turn oﬀ the diﬀuser.

5. In the power-on state, press and hold this button for 3 seconds to clear the Bluetooth pairing, as well as factory reset.

| The default setting is L level of misting.

1. Short press it to change the misting from L level to H level.

2. Press it again to change the misting from H level to M level.

3. Press it again to change the misting from M level to L level.

4. Press it again to change the misting from L level to H level. Cycling in turn.

+| The default volume is mid-range.

Short press it to increase the volume by one level. Press and hold it for 1.5S to switch to the next music. If you set the music to be oﬀ, this button will not work.

–| The default volume is mid-range.

Short press it to reduce the volume by one level.

Press and hold it for 1.5S to switch to the previous music. If you set the music to be oﬀ, this button will not work.

| The default setting is to play the local music (no prompt sound). The music will be stopped after playing once. The volume is medium, and the backlight panel is bright.

1. Short press it to turn on the Bluetooth radio (voice prompt “Bluetooth on”). After Bluetooth connection (voice prompt “Bluetooth connected”), you can play music by operating the mobile phone. If the phone is disconnected from Bluetooth, the voice prompt “Bluetooth disconnected”.

2. Press it again to turn oﬀ the Bluetooth radio. The voice prompt: “Music oﬀ”.

3. Press it again to enter the built-in music mode. The voice prompt “Local music”.

Cycling in turn.

| The default setting is candlelight.

Short press it to switch the light to light blue color. Press it again to switch to yellow color.

Press it again to switch to light purple color. Press it again to switch to warm white color. Press it again to switch to cyan color.

Press it again to switch to gradient mode: candlelight – light blue

– yellow – light purple-warm white-cyan.

Press it again to turn oﬀ the light and the backlight. Press it again to switch to candlelight.

Cycling in turn.

Long press and hold it for 2 seconds to turn oﬀ the light. Short press it to restore the light eﬀect before the light is turned oﬀ. When the APP controls the lights, the APP will turn oﬀ the local lighting eﬀects and display the actual lighting color eﬀects of the APP.

If the APP does not control the lights, the diﬀuser will keep the local lighting eﬀect.

Light button backlight indicator: When the ambient light is on, this LED indicator will be lit.

---|---
| Insert the Type C cable plug.

When the power indicator lights orange, it means that it is charging.

When the power indicator lights white, it means fully charged. When the power indicator is not on, it means not connected properly.

Connect To App

Scan the QR code below. Download and install the Puzhen Life App.
Or search for “Puzhen” in the App store. Download and install the Puzhen Life App.
Access the App and add the device according to the prompts of the App.
- Note: APP download address: https://app.puzhen.link/#/download

To add a device

Access the App, complete the registration and log in.
Click “Add Device”.
- Step 1: Connect the device with power.
- Step 2: Turn on the device. Long press the power on/off button to enter the network configuration mode.
- Step 3: After the network is successfully configured, you can use the App to operate various functions.

Safety Instructions

Safety And Care Instructions

Please read and follow these safety guidelines closely to ensure safe operation of the diffuser.

Unplug the diffuser immediately and discontinue use in the event of smoke or burning smell.
Never wrap the adapter/diffuser with cloth, paper, etc. Such actions may result in damage to the diffuser or fire.
Never touch the adapter/USB cable with wet hands as electric shock or injury may occur.
Do not disassemble or attempt to repair the diffuser, this will void the warranty.
Never immerse the diffuser in water.
Unplug the adapter when refilling, cleaning, or moving the diffuser.
Keep the diffuser out of reach of children.
Do not disassemble the nozzle during operation。
Do not put your fingers on the spray nozzle during operation to avoid injury.
Do not place acidic or alkaline chemicals in the spray nozzle.
Use only a 5V 1A power adapter that meets safety standards.
Do not shake the diffuser.
Do not use metal objects to clean the nozzle. Use only a cotton swab or cloth dipped in rubbing alcohol or a neutral detergent.
Never use the product for purposes other than those listed in this manual.
If the unit will not be used for an extended period or needs to be relocated, unplug the power adapter, take out the essential oil bottle, and wipe the nozzle clean before storage.
Clean the nozzle before switching to different essential oils.
The product is designed for using 100% pure, natural essential oil. Chemical fragrance, spice or impure essential oil used may cause product damage.
Do not move the product during its operation. Pull the power adapter instead of the wire to unplug.
Do not place the product in direct sunlight or close to a refrigerator, a fan or other hot environment.
Place the device on a flat and solid surface instead of uneven and/or unstable ones like carpets or rugs etc.

Cleaning And Maintenance

In order to avoid cross-flavors of different essential oils, it is highly recommended to use separate nozzles for only a single essential oil. Spare nozzles are available for purchase.
It is recommended to clean the nozzle with alcohol weekly, according to the instructions below:

Remove the atomization chamber from the diffuser and unscrew the essential oil bottle clockwise.
Replace the essential oil bottle with a bottle filled with 75% alcohol. Put it back into the atomization chamber and load it into the diffuser.
Set 1 hour timing to clean.
Then unscrew the nozzles off again. Rinse the nozzles from bottom. Pull out and rinse the filter Use dry cloth to wipe them clean.

P.S. The two included empty bottles are meant to be cleaned with alcohol.

Please do not tip or tilt the diffuser or the atomizing chamber containing the essential oil bottles, as this will cause the essential oil to leak into the diffuser and damage the diffuser.

Troubleshooting

Issue	Possible Cause	Solution

The diffuser does not turn on.

|

The battery is low.

| Connect the charger to charge, confirm whether the charging indicator light is on, and then try again later.
The working indicator is normal, and the nozzle has air flow, but there is no spray or the spray is abnormal| 1. The pump is not properly and securely inserted.

2. The oil bottle is empty or lower than the end of the oil pipe.

3. The oil pipe is not securely attached to the pump.

| 1.Remove the pump from the diffuser. Realign the markings and press down to secure the pump.

2.Add more essential oil or change out the bottle.

3.Remove and reinsert the oil pipe into the pump.

The working indicator is normal, and no air flow from the nozzle.

|

The machine is in a stopped state for intermittent working mode.

| Wait for the stop state to end, or reset the working time to determine whether it is in the stop state for intermittent working.

Oil is leaking from the pump.

| 1.The atomization chamber and the essential oil bottle are placed at an inclined position. 2.The essential oil bottle is not tightened.

3.The sealing ring of the essential oil bottle is lost.

| 1. Essential oil bottles should not be placed on an inclined or flat lying down.

2. Tighten the essential oil bottle

3. Check whether the seal ring of the essential oil bottle is normal.

The misting is small.

|

There is grease in the atomization chamber and atomization nozzle.

|

Clean the atomizer chamber and atomizer nozzle according to “Cleaning and Maintenance”.

Weak Bluetooth signal

| Is there some obstacles between the phone and the diffuser? Is it too far away?| 1. Stay away from obstacles

2. Get close to your phone

Bluetooth doesn’t connect

|

Did it already connect to another phone?

| 1. Disconnect the Bluetooth with the mobile phone.

2. Press and hold the power on/off button for 3 seconds to disconnect the Bluetooth connection.

WiFi doesn’t connect

| 1. The device has been bound to another account.

2. The network is abnormal.

|

1. Reset the device.

2. Check the network.

Specifications

Product Name: North Star Diffuser
Diffuser Item No: PZ-PA196
Dimensions: Φ x H=90mm x 170mm
Material: Metal、 ABS、 PP
Weight: 0.74kg
Power source: DC 5V 1A
Power: 5W
Essential: 15ml premium essential oil
Coverage area: 60 sq feet
Diffusion run time: 1-12Hchoose

FCC STATEMENT

FCC ID: 2BF67-PZPA196

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.Children should be supervised to ensure that they do not play with the appliance.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a esidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Modification: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

FCC & IC Radiation Exposure Statement:

This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.