BOSCH PKF375FP2E 30cm Domino Electric Hob Instruction Manual

June 4, 2024
Bosch

BOSCH PKF375FP2E 30cm Domino Electric Hob

BOSCH-PKF375FP2E-30cm-Domino-Electric-Hob-PRODUCT

Safety

Observe the following safety instructions.
General information

  • Read this instruction manual carefully.
  • Keep the instructions, the appliance pass and the product information safe for future reference or for the next owner.
  • Do not connect the appliance if it has been damaged in transit.

Intended use
Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under the warranty.
Only use this appliance:

  • To prepare meals and drinks.
  • Under supervision. Never leave the appliance unattended when cooking for short periods.
  • In private households and in enclosed spaces in a domestic environment.
  • Up to an altitude of max. 2000 m above sea level.

Do not use the appliance:

  • With an external timer or a separate remote control. This does not apply if operation with appliances included in EN 50615 is switched off.

Restriction on user group
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Do not let children play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised. Keep children under the age of 8 years away from the appliance and power cable.

Safe use
WARNING ‒ Risk of fire!
Leaving fat or oil cooking on an unattended hob can be dangerous and may lead to fires.

  • Never leave hot oil or fat unattended.
  • Never attempt to extinguish a fire using water; instead, switch off the appliance and then cover with a lid or a fire blanket.

The cooking surface becomes very hot.

  • Never place flammable objects on the cooking surface or in its immediate vicinity.
  • Never place objects on the cooking surface.

The appliance will become hot.

  • Do not keep combustible objects or aerosol cans in drawers directly underneath the hob.

Hob covers can cause accidents, for example due to overheating, catching fire or materials shattering.

  • Do not use hob covers.

Food may catch fire.

  • The cooking process must be monitored. A short process must be monitored continuously.

WARNING ‒ Risk of burns!
The appliance and its parts that can be touched become hot during use, particularly the hob surround, if fitted.

  • Caution should be exercised here in order to avoid touching heating elements.
  • Young children under 8 years of age must be kept away from the appliance. Hob protective grilles may cause accidents.
  • Never use hob protective grilles. The appliance becomes hot during operation.
  • Allow the appliance to cool down before cleaning.

WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.

  • Repairs to the appliance should only be carried out by trained specialist staff.
  • Only use genuine spare parts when repairing the appliance.
  • If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk..

If the appliance or the power cord is damaged, this is dangerous.

  • Never operate a damaged appliance.

  • If the surface is cracked, you must switch off the appliance in order to prevent a possible electrical shock. To do this, switch off the appliance via the fuse in the fuse box rather than at the main switch.

  • If the appliance or the power cable is damaged, immediately switch off the fuse in the fuse box.

  • Call customer services. → Page 13
    An ingress of moisture can cause an electric shock.

  • Do not use steam- or high-pressure cleaners to clean the appliance. The insulation on cables of electrical appliances may melt if it touches hot parts of the appliance.

  • Never bring electrical appliance cables into contact with hot parts of the appliance.

WARNING ‒ Risk of injury!
Saucepans may suddenly jump due to liquid between the saucepan base and the hotplate.

  • Always keep hotplates and saucepan bases dry.

WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.

  • Keep packaging material away from children.
  • Do not let children play with packaging material. Children may breathe in or swallow small parts, causing them to suffocate.
  • Keep small parts away from children.
  • Do not let children play with small parts.

Preventing material damage

ATTENTION!
Rough pot and pan bases will scratch the ceramic.

  • Check your cookware. Boiling pans dry may damage cookware or the appliance.
  • Never place empty pans on a heated hotplate or allow to boil dry. Incorrectly positioned cookware can cause the appliance to overheat.
  • Never place hot pots or pans on the controls or the hob surround. Damage can occur if hard or pointed objects fall onto the hob.
  • Do not let hard or pointed objects fall onto the hob. Non-heat-resistant materials will melt on heated hotplates.
  • Do not use oven protective foil.
  • Do not use aluminum foil or plastic containers

Overview of the most common damage
Here you can find the most common types of damage and tips on how to avoid them.

Damage Cause Measure
Stains Food boiling over Remove boiled-over food immediately with a glass

scraper.

Stains| Unsuitable cleaning

products

| Only use cleaning products that are suitable

for glass ceramic.

Scratch es| Salt, sugar or sand| Do not use the hob as a work surface or storage

space.

Damage Cause Measure

Scratch

es

| Rough pot or

pan bases

| Check your cookware.
Discol- ouration| Unsuitable cleaning

products

| Only use cleaning products that are suitable

for glass ceramic.

Discol-

ouration

| Pan abrasion,

e.g. aluminium

| Lift pots and pans to

move on the hob.

Blisters| Sugar or food with a high

sugar content

| Remove boiled-over food immediately with a glass

scraper.

Environmental protection and saving energy

Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
▶ Sort the individual components by type and dispose of them separately.
Saving energy
If you follow these instructions, your appliance will use less energy. Select the cooking zone to match the size of your pan. Centre the cookware on the hob. Use cookware whose base diameter is the same diameter as the hotplate.
Tip: Cookware manufacturers often give the upper diameter of the saucepan. It is often larger than the base diameter.

  • Unsuitable cookware or incompletely covered cooking zones consume a lot of energy. Cover saucepans with suitable lids.
  • Cooking without a lid consumes considerably more energy. Lift lids as infrequently as possible.
  • When you lift the lid, a lot of energy escapes.

Use a glass lid.

  • You can see into the pan through a glass lid without having to lift it. Use pots and pans with flat bases.
  • Uneven bases increase energy consumption. Use cookware that is suitable for the quantity of food.
  • Large items of cookware containing little food need more energy to heat up. Cook with only a little water.
  • The more water that is contained in the cookware, the more energy is required to heat it up. Turn down to a lower power level early on.
  • If you use an ongoing power level that is too high, you will waste energy. Take advantage of the hob’s residual heat. With longer cooking times switch off the hotplate 5-10 minutes before the end of cooking.
  • Unused residual heat increases energy consumption. Product Information according (EU) 66/2014 can be found on the attached appliance pass and online on the product page for your appliance.

Familiarising yourself with your appliance

The instruction manual is the same for various different hobs. You can find the hob dimensions in the overview of models. → Page 2

Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.

BOSCH-PKF375FP2E-30cm-Domino-Electric-Hob-FIG1

Touch fields
Touch fields are touch-sensitive surfaces. To select a function, and touch the relevant field.
ATTENTION!
Incorrectly positioned cookware can cause the appliance to overheat.

  • Never place hot pots or pans on the controls or the hob surround.
Touch field Name
Main switch
Hotplate selection

Numbers

1 to 9

| Control panel
| Activating the dual-circuit hotplate
| Time-setting options/childproof lock
| PowerBoost function

Note: Always keep the control panel dry. Moisture impairs the function.
Hotplates
You can find an overview of the different connections for the hotplates here. If you activate the connections, the relevant displays light up.

Hotplate Activating and deactivating

   Single-circuit

hotplate

|
   Dual-circuit

hotplate

| Select the hotplate and

press .

Residual heat indicator
The hob has a two-stage residual heat indicator for each hotplate. Do not touch the hotplate while the residual heat indicator is lit up.

Display Meaning
The hotplate is so hot that you can keep small dishes warm or melt cook-

ing chocolate.

| The hotplate is hot.

Basic operation

Switching the hob on and off
You can use the main switch to switch the hob on and off.
Switching on the hob

  • Press.
  • An audible signal sounds.
  • The light bar above lights up.
  • The displays for the control panel and the power level display light up.
  • The hob is ready for use.

Switching off the hob

  • Press until the light bar above and the power level display go out.
  • All hotplates are switched off.
  • The residual heat indicator remains on until the hotplates have cooled down sufficiently.

Notes

  • The hob switches off automatically if all hotplates have been switched off for more than 10-60 seconds.
  • The settings remain stored for 4 seconds after the hob has been switched off. If you switch the hob back on during this time, it will operate using the stored settings.

Setting the hotplates
You can adjust the heat setting of the hotplate on the control panel.

Notes

  • Dark areas in the glow pattern of the hotplate are part of the technical design. They do not affect the functionality of the hotplate.
  • The hotplate regulates the temperature by switching the heat on and off. The heat may also switch on and off when at the highest setting.
    • This protects easily damaged components from overheating.
    • The appliance is protected against electrical overload.
    • Better cooking results are achieved.
  • With multi-circuit hotplates, the heating of the inner filament circuits and the heating of the connections may switch on and off at different times.

Selecting heat settings

  1. Use or to select the hotplate.
  2. . Select the required power level on the control panel.

Changing heat settings

  1. Use or to select the hotplate.
  2. Select the required power level on the control panel.

Switching off the hotplate

  1. Use or to select the hotplate.
  2. Set 0 on the control panel. After approx. 10 seconds, the residual heat indicator appears.

Note: The hotplate that was last selected remains activated. You can adjust the hotplate without selecting it again.

Recommended cooking settings
You can find an overview of different foods with appropriate power levels here. The cooking time varies depending on the type, weight, thickness and quality of the food. The ongoing power level depends on the cookware used.
Cooking tips

  • To bring food to the boil, use heat setting 9.
  • Stir thick liquids occasionally.
  • Food that needs to be seared quickly or that initially loses a lot of liquid during frying should be fried in small portions.
  • Tips for saving energy when cooking. → Page 5

Melting

Food| Ongoing cooking setting| Ongoing cooking time in minutes
---|---|---
Chocolate, cooking chocolate| 1-1.| –
Butter, honey, gelatine| 1-2| –

Heating or keeping warm

Stew, e.g. lentil stew 1-2
Milk1 1.-2.
Sausages in water1 3-4

1 Prepare the dish without the lid.

Defrosting and heating

Spinach, frozen 2.-3. 10-20
Goulash, frozen 2.-3. 20-30

Poaching or simmering

Dumplings1, 2 4.-5. 20-30
Fish1, 2 4-5 10-15
White sauce, e.g. béchamel 1-2 3-6

Whisked sauces, e.g. sauce

béarnaise or hollandaise

| 3-4| 8-12
1 Bring the water to the boil with the lid on.

2 Continue to cook the dish without a lid.

Boiling, steaming or stewing

Rice with double the volume of

water

| 2-3| 15-30
---|---|---
Rice pudding| 1.-2.| 35-45
Unpeeled boiled potatoes| 4-5| 25-30
Boiled potatoes| 4-5| 15-25
Pasta, noodles1, 2| 6-7| 6-10
Stew, soup| 3.-4.| 15-60
Vegetables, fresh| 2.-3.| 10-20
Vegetables, frozen| 3.-4.| 10-20
Food in a pressure cooker| 4-5| –
1 Bring the water to the boil with the lid on.

2 Continue to cook the dish without a lid.

Braising

Roulades 4-5 50-60
Pot roast 4-5 60-100
--- --- ---
Goulash 2.-3. 50-60

Frying with a little oil

Escalope, plain or breaded 6-7 6-10
Escalope, frozen 6-7 8-12
Chops, plain or breaded1 6-7 8-12
Steak, 3 cm thick 7-8 8-12
Patties, 3 cm thick1 4.-5. 30-40
Hamburgers, 2 cm thick1 6-7 10-20
Poultry breast, 2 cm thick1 5-6 10-20
Poultry breast, frozen1 5-6 10-30
Fish or fish fillet, plain 5-6 8-20
Fish or fish fillet, breaded 6-7 8-20

Fish or fish fillet, breaded and

frozen, e.g. fish fingers

| 6-7| 8-12
Scampi, prawns| 7-8| 4-10
Vegetables or mushrooms,

fresh, sautéing

| 7-8| 10-20
Vegetables or meat in strips

cooked Asian-style

| 7.-8.| 15-20
Stir fry, frozen| 6-7| 6-10
Pancakes| 6-7| One by

one

Omelette| 3.-4.| One by

one

Fried eggs| 5-6| 3-6
1 Turn the dish several times.

Deep-frying

Frozen products, e.g. chips or

chicken nuggets

| 8-9| –
---|---|---
Croquettes, frozen| 7-8| –
Meat, e.g. chicken| 6-7| –
Fish, breaded or battered| 5-6| –
Vegetables or mushrooms, breaded or battered

Tempura

| 5-6| –
Small pastries, e.g. doughnuts,

fruit in batter

| 4-5| –

PowerBoost function
You can use the PowerBoost function to heat up large volumes of water even faster than with power level 9. The PowerBoost function is only available on hotplates marked with.

Switching on PowerBoost
WARNING ‒ Risk of fire!
Oil and fat heat up quickly with the PowerBoost function. Oil and fat ignite quickly if overheated.

  • When cooking, never leave the hob unattended.

Requirement: With dual-circuit hotplates, the second filament circuit has to be activated for use with the PowerBoost function.

  1. Use or to select the hotplate.
  2. Set power level 9.
  3. Press power level 9 again.
    • The display lights up.

Switching off PowerBoost
If you do not switch off the PowerBoost function, the PowerBoost function is automatically switched off after a certain period of time. The hotplate switches back to power level 9.

  1. Use or to select the hotplate.
  2. Select any ongoing power level.
    • The display goes out.

Childproof lock

You can use the childproof lock to prevent children from switching on the hob.
Activating the childproof lock
Requirement: The hob is switched off.

  • Press and hold for approx. 4 seconds.
  • lights up for approx. 10 seconds.
  • The hob is locked.

Deactivating the childproof lock
Requirement: The hob is switched off.

  • Press and hold for approx. 4 seconds. a The lock is released.

Automatic childproof lock
This function automatically activates the childproof lock when you switch off the hob. The automatic childproof lock can be activated in the basic settings. → Page 11

Time-setting options

Your appliance has different time-setting options which can be used to set a cooking time, a kitchen timer or a stopwatch.
Cooking time
Enter a cooking time for the relevant hotplate. When the cooking time has elapsed, the hotplate switches off automatically.
You can set a cooking time of up to 99 minutes.
Setting the cooking time

  1. Use or to select the hotplate.
  2. Set the required power level.
  3. Press twice.
  4. Within the next 10 seconds, set the required cooking time on the control panel.

Changing or cancelling the cooking time

  1. Use or to select the hotplate.
  2. Press twice.
  3. On the control panel, change the cooking time or set it to.

Switching off the continuous signal
You can switch the signal off manually.

  • Press any touch field.
  • The displays go out and the signal tone stops

Automatic timer
You can use this function to preselect a cooking time for all hotplates. Each time a hotplate is switched on, the preselected cooking time counts down. When the cooking time has elapsed, the hotplate switches off automatically. Switch on the automatic timer in the basic settings.
Tip: The automatic timer is valid for all hotplates. You can reduce or delete the cooking time for individual hotplates.
Kitchen timer
You can set a time of up to 99 minutes after which a signal will then sound. The kitchen timer runs independently of all other settings.
Setting the kitchen timer

  1. Press repeatedly until lights up. a lights up on the timer display.
  2. Set the desired time on the control panel.
    • The time counts down.
    • When the time has elapsed, a signal sounds. lights up on the timer display for 10 seconds. a flash.

Setting the correct time

  1. Press repeatedly until lights up
  2. Set the time on the control panel again.

Switching off the timer signal
You can switch the signal off manually.

  • Press any touch field.
    • The display goes out and the signal tone stops.

Stopwatch function
The stopwatch function displays the time which has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the stopwatch function is switched off as well.
Switching on the stopwatch function

  1. Press repeatedly until lights up.
    • appears on the timer display.
  2. Press anywhere on the control panel.
    • The time measurement begins.
    • Seconds are displayed during the first minute, then minutes.

Switching off the stopwatch function

  1. Press repeatedly until lights up.
  2. Press anywhere on the control panel.
    • The timer display goes out.

Automatic switch-off

If you do not change the settings of a hotplate for a long time, automatic switch-off will be activated. When the hotplate switches off depends on the heat setting selected (1 to 10 hours). The heat to the hotplate is switched off. and the residual heat indicator / flash alternately on the hotplate display.

Continuing cooking after automatic switch-off

  1. Press any touch field.
    • The display goes out.
  2. Set the required power level for the hotplate again.

Energy consumption display

This function indicates the total amount of energy consumed between switching the hob on and switching it off again. Once switched off, the energy consumption is displayed in kilowatt-hours, e.g. 1.08 kWh, for 10 seconds. The accuracy of the display depends on various factors such as the voltage quality of the power supply. The display can be activated in the basic settings. → Page 11

Basic settings

You can configure the basic settings for your appliance to meet your needs.

Overview of the basic settings
This is where you can find an overview of the basic settings and the factory preset values.

Dis- play Selection
Automatic childproof lock

–  Switched off.1

–  Switched on.

–  Manual and automatic childproof lock are

switched off.

****| Signal tone

– Confirmation signal and operating error signal are switched off. The main switch sig- nal remains switched on.

– Only the operating error signal is switched on.

– Only the confirmation signal is switched on.

– Confirmation signal and operating error

signal are switched on.1

****| Energy consumption display

Ask your electricity supplier what the mains voltage is.

– Consumption display is switched off.1

–  Consumption display at mains voltage of 230 V.

– Consumption display at mains voltage of 400 V.

– Consumption display at mains voltage of 220 V.

–  Consumption display at mains voltage of

240 V.

****| Automatic timer

– Switched off.1

–     – Cooking time after which the hotplates

switch off.

****| Duration of the timer end signal

–  10 seconds.1

–  30 seconds.

–  1 minute.

| Activating the heating elements  – Switched off.

–  Switched on.

–  The last setting before switching off the

hotplate.1

1 Factory setting
Dis- play| Selection
---|---
****| Time for selecting hotplates

– Unlimited: The last hotplate selected can always be adjusted without having to select it again.1

– You can adjust the last hotplate selected within 10 seconds after selecting it. After this time you have to select the hotplate again be-

fore adjusting it.

****| Resetting to the factory settings

–  Switched off.1

–  Switched on.

1 Factory setting

Changing basic settings
Requirement: The hob is switched off.

  1. Press.
  2. Within the next 10 seconds, press and hold for 4 seconds
  3. Press repeatedly until the required display appears.
  4. Set the desired value on the control panel.
  5. . Press and hold for 4 seconds.

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
Cleaning products
You can obtain suitable cleaning products and glass scrapers from customer service, the online shop or a retailer.
ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appliance.

  • Never use unsuitable cleaning products.

Unsuitable cleaning products

  • Undiluted detergent
  • Detergent intended for dishwashers
  • Abrasive cleaners
  • Aggressive cleaning products such as oven spray or stain remover
  • Abrasive sponges
  • High-pressure or steam jet cleaners

Cleaning the glass ceramic
Clean the hob after every use to stop cooking residues
from getting burnt on.
Note: Note the information on unsuitable cleaning products.
Requirement: The hob has cooled down.

  1. Remove heavy soiling using a glass scraper.
  2. Clean the hob with a cleaning product for glass ceramic. Follow the cleaning instructions on the product packaging.

Tip: You can achieve good cleaning results using a special sponge for glass ceramic.

Cleaning the hob surround
Clean the hob frame after use if dirty or stained.
Notes

  • Note the information on unsuitable cleaning
    products.
    Do not use the glass scraper.

    • Clean the hob frame with hot soapy water and a soft cloth.
    • Wash new sponge cloths thoroughly before use.
    • Dry with a soft cloth.

Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out by trained specialist staff.
▶ If the appliance is defective, call Customer Service.

WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.

  • Repairs to the appliance should only be carried out by trained specialist staff.
  • Only use genuine spare parts when repairing the appliance.
  • If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk.

WARNING ‒ Risk of burns!
The hotplate heats up but the display does not work.

  • Switch off the fuse in the fuse box.
  • Call the customer service.

WARNING ‒ Risk of fire!
The hob switches off automatically and can no longer be operated. It may switch on unintentionally at a later point.

  • Switch off the fuse in the fuse box.
  • Call the customer service.

Information on display panel

Fault Cause and troubleshooting
None There has been a power cut.

1. Check the household fuse for the appliance.

2. Check whether there has been a power failure by trying other electrical appliances.

All displays flash| The control panel is wet or objects are lying on it.

Dry the control panel or remove the object.

Fault Cause and troubleshooting

| Several hotplates have been used over a prolonged period at high power settings. The hot- plate has been switched off to protect the electronics.

1. Wait a while.

2. Touch any touch field.

When the message no longer appears, the electronics have cooled down sufficiently.

You can continue to cook.


| Despite being switched off by , the electronics have become hot again. All hotplates have therefore been switched off.

1. Wait a while.

2. Touch any touch field.

When the message no longer appears, the electronics have cooled down sufficiently.

You can continue to cook.

  and the heat set- ting flash alternately. A signal sounds.| Hot pot near the control panel. There is a risk that the electronics will overheat.

Remove the pan.

The display goes out shortly afterwards.

 and audible signal| Hot pot near the control panel. The hotplate has been switched off to protect the electron- ics.

1. Remove the pot.

2. Wait a while.

3. Touch any touch field.

When the message no longer appears, the electronics have cooled down sufficiently.

You can continue to cook.


| The hotplate was on for too long and has switched off automatically.

You can switch the hotplate back on again immediately.

 and hotplates do not heat up| Demo mode is activated.

1. Disconnect the appliance from the power supply for 30 seconds by briefly switching off the circuit breaker in the fuse box.

2. Touch any touch field within the next three minutes.

A message with “E” appears on the dis- play, e.g. E0111.|

Disposal

Disposing of old appliances
Valuable raw materials can be reused by recycling.

  1. Unplug the appliance from the mains.
  2. Cut through the power cord.
  3. Dispose of the appliance in an environmentally friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service

Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.
Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E-Nr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

Product number (E-Nr.) and production number (FD)
You can find the product number (E-Nr.) and the production number (FD) on the appliance’s rating plate.
The rating plate can be found:

  • on the appliance certificate.
  • on the lower section of the hob.

Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly Register your new device on MyBosch now and profit directly from:

  • Expert tips & tricks for your appliance
  • Warranty extension options
  • Discounts for accessories & spare-parts
  • Digital manual and all appliance data at hand
  • Easy access to Bosch Home Appliances Service

Free and easy registration – also on mobile phones: www.bosch- home.com/welcome

Looking for help? You’ll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you:
www.bosch-home.com/service
Contact data of all countries are listed in the attached service directory.

BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
www.bosch-home.com
A Bosch Company

Valid within Great Britain:
Imported to Great Britain by
BSH Home Appliances Ltd.
Grand Union House
Old Wolverton Road
Wolverton, Milton Keynes
MK12 5PT
United Kingdom

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals