SPEKTRUM iX AirWare Change Log Owner’s Manual

SPEKTRUM iX AirWare Change Log

Version 2.00.13

New Features

• iX20 features added to iX14
  • Increased to 20 Channels
  • On the fly adjustments (OTF) of mixes, etc.
  • Hi Precision Mixing / 0.1% Mixing
  • Origin Mixing
  • Elevon with Canard
  • Multi-Engine
  • 24 Curved Mixes / 8 Sequencers
• Smart Transmitter File support functions
• 14@22ms Servo Mode automatically selected when binding to a 14-channel receiver that supports it
• Added an option to delete multiple models at one time
• Redesign of Telemetry menu, now called Telemetry Utilities.
• Updated the handling of Turbine Off Condition Status
• X-Plus Enable field was removed from the Frame Rate screen. X-Plus visibility is now controlled by the monitor channel count selected in the Model Details screen for a given model.

Corrections & Improvements

• Sailplane mode AS3X/SAFE now functions correctly for V-Tail B models. Previously the yaw response was reversed.
• German translations have been improved on several Forward Programming screens.
• Improved telemetry processing to avoid extraneous digits being displayed or spoken.
• Update Digital Switch Assignment screen to properly handle servos that are assigned to control surfaces

Corrections & Improvements 

• Fixed bug dealing with duplicating the active model

Version 1.21.06

New Features

• Support new PowerSafe features which utilize AS6000
• Support new PowerSafe “fast boot” alarm generation
• Support in Sleep Mode screen for putting new PowerSafe receivers into sleep mode
• Support Smart Battery data from new PowerSafe receivers
• Added Servo Cycler as new default Sequencer
• Added the ability to adjust the output values associated with the positions of Logical Switches

Corrections & Improvements

• Updated default values for Heli, Sail, Multi OTF Ranges (iX20 Only)
• Fixed rare crash when entering RX Port Assignment screen
• Fixed rare crash in Sequencer screen
• Corrected issue on Servo Travel screen when values are locked
• Corrected behavior on Servo Travel screen when servos are reversed
• Updated default values for Flight log warnings
• Corrected behavior with TIMER_MIN macros that were not accounting for translations

iX20 Version 1.10.11
iX14 Version 1.02.11
iX12 Version 1.20.11

New Features

• Support for Spektrum Sky™ Remote ID
• Telemetry warning added for Turbine Max Pump Voltage
• New BNF model files added for new releases

Corrections & Improvements

• Taileron differential is now properly mixed to control surfaces
• Trim values are now processed properly when switching between flight modes for Aileron wing types (iX20/iX14)
• Updated regulatory screens (iX20/iX14)
• Turbine status messages are now properly displayed
• Dashboard screen properly orders telemetry screens to be displayed when gaps exist in the telemetry configurations
• German translation improvements
• Airware no longer crashes on Motor Curve screen when motor input is invalid
• Smart Battery telemetry now handles 0 Cycle data correctly
• “No Data” in ESC telemetry now handled properly
• RX Port Assignment screen updated to properly handle invalid data (iX12)

iX20 Version 1.09.07
iX14 Version 1.01.05
iX12 Version 1.19.02 

New Features

• New BNF Model Presets added
• Added support for Combo Switches outside of mixing (iX20/iX14)
• Added support for Logical Switches (iX20/iX14)
• Programmable Mix names can now be edited
• The battery icon on AirWare dashboard now shows an indicator when charging
• The Product Information screen now has a button that will launch the Play Store app and display the AirWare app page
• LT/RT/LTT/RTT can now be assigned as stick trims (aileron, elevator, rudder and throttle)
• Trimmer switch setup has been moved from Digital Switch Setup to Analog Switch Setup so that they can be configured properly
• New Text to Speech macros has been added to announce Lowest Cell Voltage for Smart Battery telemetry
• Custom intervals can now be specified in Custom Reports in Audio Events
• The quick sleep button on the Sleep Mode screen has been changed from a press and hold to a swipe motion

Corrections & Improvements

• Configuration of rate values in mixes has been improved. Dragging sliders snaps to even percentage values. Separate buttons are available for incrementing by 1% or 0.1% (iX20/iX14)
• Dashboard Setup Telemetry Panel “+” button now works properly after a selection is canceled
• Left or Right analog trims can now be used to activate a Timer
• Flaperon + Taileron no longer causes roll in tail surfaces
• RX Pack Capacity telemetry screen properly displays no data when Batt 2 is not present
• Menu Setup screen has been removed. Enabling My List is now located in the Model Details screen for a given model (iX20/iX14)
• Invalid receiver information is no longer displayed in the Forward Programming screen prior to connecting to a receiver
• Values are displayed properly in Travel Adjust Screen in circumstances when channels are reversed
• Duplicate subcategory names are no longer allowed
• When an Emoji is included in a model name, it is replaced with an underline character when exporting an iSPM file
• Volume control UI has been updated
• When switching from V-tail A to V-tail B the left and right servo port assignments are maintained correctly
• Sequencer Activity no longer limits available channels for Channel A on a model imported from a radio with less channels
• Model Note menu now works properly in Dark Mode
• GPS Altitude value properly rounded for audio callouts
• Timer audio events no longer announce when changing models
• Lock feature now functions properly in all mixes
• Availability of turbine telemetry macros are now synchronized across the dashboard screens and gauge panels
• Smart Battery low voltage telemetry alarm configuration now defaults to 4.0v
• Analog trim range now functions correctly with a 30% range when step size set to one
• Turbine EGT is now available as an option on gauge/dashboard pages
• Sleep Mode dialog correctly shows state of Serial Port Power
• Model Select screen header bar is displayed properly
• Accurate values are displayed on the Flight Log telemetry screen when %Range is selected
• Programmable Mixes are now shown in the Digital Switch Setup screen when a switch is assigned as source
• Switch D2 and E2 now have a proper short display name (iX20)
• Values are now saved on Heli Cyclic/Thro Mixing screen
• Mixing screen operation has been updated to be more intuitive

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>