CRelando Fabric Spray Paint Instruction Manual
- July 31, 2024
- CRelando
Table of Contents
CRelando Fabric Spray Paint
Specifications
- Product Name: TEXTIL-SPRAY / FABRIC SPRAY PAINT / SPRAYS POUR TEXTILES
- Model Number: IAN 727_2307
- Designed for: Painting textiles
- Intended Use: Private use only, not suitable for commercial purposes
Product Usage Instructions
Introduction
Before using the product for the first time, familiarize yourself with it.
Read the following user manual and safety instructions carefully. If any
problems occur, consult your doctor.
Usage and Cleaning
Attention! Risk of Damage!
- When painting, wear an overall or old clothes, and cover the floor and furniture.
- Workable on fabric of cotton and polyester.
- Prewash fabric before painting and avoid using fabric softener.
- After each use, wipe off and clean the spray head carefully with warm water.
Safety Instructions
Warning! Risk of Injury or Death of Infants!
Do not leave children unsupervised with the packaging material.
Keep the product away from children as it can be hazardous if swallowed.
Caution! Risk of Injury!
- Clean your hands thoroughly after painting.
- Avoid contact with the eyes. If contact occurs, rinse your eyes under running water for several minutes. Remove contact lenses if applicable. Consult a doctor if irritation continues.
- Paint in a well-ventilated place to avoid health issues.
- If ongoing skin irritation occurs, stop using the product and consult a doctor.
Additional Information
Make sure you have enough light and space. Cover your work surface and
clothing before starting to paint.
FAQ (Frequently Asked Questions)
-
Q: Can I use the fabric spray paint on all types of fabrics?
A: The fabric spray paint works best on cotton and polyester fabrics. It is recommended to test on a small area first to ensure the best results. -
Q: How should I clean the spray head after each use?
A: Wipe off the spray head carefully with warm water to clean it after each use. Make sure to follow the cleaning instructions provided in the user manual for proper maintenance.
FABRIC SPRAY PAINT
Introduction
We congratulate you on the purchase of your new product. You have chosen a
high quality product. Familiarise yourself with the product before using it
for the first time. In addition, please carefully refer to the operating
instructions and the safety advice below. Only use the product as instructed
and only for the indicated field of application. Keep these instructions in a
safe place. If you pass the product on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended use
The product is exclusively designed for painting textile, any other use is not
intended. The product is only meant for private use and not suitable for
commercial purposes.
Safety instructions
WARNING! RISK OF INJURY OR DEATH OF INFANTS!
- Do not leave children unsupervised with the packaging material.
- Keep the product away from children, it can be hazardous if swallowed.
CAUTION! RISK OF INJURY!
- Clean your hands thoroughly after painting.
- Avoid contact with the eyes. If your eyes have come into contact with the product, carefully rinse your eyes under running water for several minutes, and remove contact lenses if you are wearing any. If irritation continues, consult your doctor.
- Paint in a well-ventilated place! If health problems occur, consult your doctor.
- In the event of ongoing skin irritation, stop using the product and consult your doctor.
Usage and cleaning
ATTENTION! RISK OF DAMAGE!
- When painting, wear an overall or old clothes, and cover the floor and furniture!
- Workable on fabric of cotton and polyester.
- Prewash fabric, and do not use fabric softener.
- Wipe off and clean with warm water for the spray head carefully after each use.
INFO:
- Make sure that you have enough light and space, and cover work surface and clothing before you start painting.
- Check the textile and insert the isolate board between layers of fabric.
- Always test for best results. Colors work best on light-colored fabrics.
- Shake the spray well before use and spray 2-3 times on a neutral surface for trial.
- Spray 2-5 times on the dry fabric based on your desired performance and leave to dry for about 2 hours.
- Iron through a cloth at cotton temperature for 3 minutes.
- The paint is washable up to max. 40°C after fixing.
TIPS:
-
Quick-Easy Ideas:
Crumple fabric with fingertips. Spray fabric as desired. Wearing protective gloves and open crumpled fabric carefully. Repeat the step with another color for desired performance. -
Stencil ideas:
For the stencil with punched shape, place self-healing mat under the stencil and use craft knife to cut out the shape by following the punched line. Use punched shape as reverse stencil to create your design. -
Masking Technique:
- Use tape or double-sided tape to fix the stencil to minimize possibility of blur shape.
- Cover other patterns on stencil and fabric when spraying the designated pattern.
- Keep 30-40 cm from spray head to stencil for lighter color; 15- 25 cm for darker color.
- Use tissue to absorb remain paints on stencil.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for more details of how to
dispose of your worn-out product.
The product incl. accessories and packaging materials are recyclable and are
subject to extended producer responsibility.
Dispose them separately, following the illustrated Info-tri (sorting
information), for better waste treatment.
The Triman logo is valid in France only.
Service
Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1800 200736
E-Mail: owim@lidl.ie
PDF ONLINE
www.lidl-service.com
IAN 445727_2307
OWIM GmbH & Co. KG
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Model No.: HG11049A/ HG11049B
Version: 01/2024
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>