Coroplast tape Wire Harness Tapes Instructions

Table of Contents

Coroplast-tape-Wire-Harness-Tapes-PRODUCT

Coroplast Tape does not produce any substances as defined in Regulation 1907/2006 (REACH) and therefore is not obliged to register.
The raw materials used are registered or pre-registered in compliance with current legislation. Most of the tapes do not contain substances listed in the app.
XIV of REACH regulation or on the candidate list. For products exceeding the 0.1% limit, relevant information can be found in the Technical Information data sheets.
The products comply with the restrictions in Article 67 of the REACH regulation for the production, marketing, and use of hazardous substances, mixtures, and articles listed in Annex XVII of the REACH regulation.
Coroplast Tape products are the result of thorough research and are state-of-the-art.

Product Suitability Check:
- Before use, ensure the product is suitable for the specific application by examining it thoroughly.
Application:
- Follow these steps for applying Coroplast Tape:
- Clean the surface where the tape will be applied
- Cut the tape to the desired length
- Peel off the backing and press the tape firmly onto the surface
- Ensure proper adhesion by smoothing out any air bubbles
Storage:
- Store Coroplast Tape in a cool, dry place away from direct sunlight and extreme temperatures to maintain its adhesive properties.
Disposal:
- Dispose of used tape according to local regulations for waste disposal.

Q: Is Coroplast Tape environmentally friendly?
- A: Coroplast Tape complies with regulations and aims to avoid using harmful substances. However, proper disposal is recommended.
Q: How can I remove the Coroplast Tape?
- A: To remove the tape, gently peel it off from one corner while applying heat with a hairdryer can help soften the adhesive for easier removal.

Coroplast Tape does not produce any substances as defined in Regulation 1907/2006 (Reach) and therefore we are not obliged to register. In compliance with current legislation we only buy and use raw materials that are itself or whose components are registered or preregistered.
Coroplast Tape aims not to use substances that are listed in the app. XIV of Reach regulation or that are on the candidate list. Most of the tapes we sell do not contain any of those substances.
For products where we exceed for a transitional period the limit of 0.1 %, you will find the appropriate information acc. to article 33 of
Reach regulation in our “Technical Information” data sheets for these products and we will list them in the SCIP database from ECHA.
It is self-evident that Coroplast Tapes complies with the restrictions in Article 67 of Reach regulation for the production, marketing, and use of certain hazardous substances, mixtures, and articles that are listed in Annex XVII of Reach regulation.
Our products are the result of thorough research. They are state-of-the-art.
To assist in the usefulness of a product, we give data and technical information to the best of our knowledge, but without any warranty or guarantee. We expressly reserve the right to make technical modifications to all our products.
Note: Before use, the suitability of the product for the specific application must be examined by the user.

Read User Manual Online (PDF format)