Niye T22 Bluetooth Headset User Manual

Niye T22 Bluetooth Headset

Self-use
After leaving the factory, the Bluetooth headset is fully tested after startup, so the battery is not fully charged It is recommended that you first fully charge the Bluetooth headset with a 5v-la charger or an electric sb. After the first use of the Bluetooth headset, all the power is used up and then fully charged, so that the service life is longer

Note:
Do not use fast charging to avoid damage to the earphone battery.

Introduction to headset functions

• Power on:
  When the machine is out of the warehouse, the white light is inside 3 times, and then the white and ice blue lights flash alternately to enter the pairing state, and the prompt tone indicates “the machine is started and paired successfully”.

• Shutdown:
  After charging and shutting down, the ice-blue light is on for a long time, press and hold the MF key for 5 seconds, and the ice-blue light flashes 3times, and the prompt tone “shut down”

• Pair:
  After leaving the warehouse, the white light flashes three times, the white and ice-blue lights of the main and auxiliary ears flash alternately, and the white and ice-blue lights of the main ear flash alternately, and the auxiliary ears turn off the lights and enter the matching state.

• Pairing connection:
  After leaving the warehouse, the mortar light flashes 3 times, the white and ice blue lights of the main and auxiliary ears flash alternately, and the left and right ears enter the pairing. After pairing, the white and ice-blue lights of the main ear flash alternately, and the auxiliary ear light is off. Enter the pairing connection state with the mobile phone. Turn on the Bluetooth of the mobile phone and click the Bluetooth pairing device name to pair. After the pairing is successful, theprompt will be prompted Voice, ” Ding Dong”

• Letgo/stop:
  While playing, double-click the MFB key for a short time to pause the music

• Disconnect:

  • When connected, turn off the Bluetooth or Bluetooth headset of the mobile phone, and the prompt tone is” Ding Dong”.
  • The white and ice blue light on the main ear flashes and the light on the auxiliary ear goes off.

• Automatic loopback:
  When the machine is turned on within the connection range, the Bluetooth device will automatically connect with the paired bluetooth device, and the ” Ding Dong ” will sound.

• Answer the phone:
  When calling, press the MFB key to answer the call.

• Hangup:
  In a call or charging, long the MFB key briefly to hang up the phone.

• Call number:
  When calling, the headset will automatically report the number: voice prompt, incoming call “1…

• Reject calls:
  When calling, press and hold the MFB key for about 2

• Low power shutdown:
  When the battery voltage is lower than the battery voltage, the headset will turn off automatically

• Volume up and down:
  Single click the left ear MFB key to reduce the volume, and single click the right MFB key to increase the volume.

• Up and down:
  Long press 2s MFB key on the left ear to achieve the previous song, and triple long press 2s MFB key on the right ear to realize the next song

• Headphone compartment charging:
  Put the earphones into the bin for charging, and turn off the light after the earphones are full of ice-blue light.

• Charging of charging bin
  Plug in the 5V power supply to charge the bin, and the display screen shows the power.

• Voice wake-up function:
  Three touch.

• Reset function:
  Five Touch.

Notes:
When charging the headset or compartment, please use a charger with no more than 51A output. Do not use fast charging to avoid damage to the earphone battery. Before charging, please check whether the charger model is applicable. The headset will discharge automatically when it is in use. It is recommended to charge the headset once a month. Do not throw the headset into the fire or water.

Disconnect the phone from the headset:
To disconnect the phone from the headset, turn off the headset in any of the following ways: disconnect the headset from the phone using the Bluetooth menu; move the headset away from the phone 10 meters (about 30 feet)

Maintenance

Put all accessories out of the reach of children. Rainwater and other liquids will erode the circuit of the headset. If the headset has been wet, please dry the headset thoroughly before use. Do not disassemble, modify, or squeeze the headset without permission, otherwise, it may cause the headset to malfunction or burn.

Per the relevant provisions of the relevant laws and regulations of the People’s Republic of China, the people’s Republic of China on the protection of consumers’ rights and interests and other relevant laws and regulations of the state, we protect the repair and replacement of the sellers and producers of consumer goods. For the relevant goods, earnestly fulfill the responsibility and obligation of repair, replacement, and return.

1. The warranty service is only limited to the nonhumanmade damage caused by the quality of the product under normal use.
2. Within 30 days from the date of purchase, if there is any performance failure or annual artificial damage), the product will be returned and replaced free of charge.
3. The product subject will provide a warranty within one year from the date of purchase.
4. The company still needs to repair the product beyond the warranty date or beyond the warranty period, We charge for maintenance at our discretion.

Note that when:
you tear up or lose the warranty card, you will lose the chance of a warranty. Our company has the right to a final explanation.

Product quality warranty card

This warranty card must be provided when receiving service. Please keep it properly!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>