Newland FM510-V IVD Scanner User Guide
- July 29, 2024
- Newland
Table of Contents
Newland FM510-V IVD Scanner
Product Information
Specifications:
- Input Voltage: 5V DC
- Wire Color Configuration:
- Pin 1: Red
- Pin 2: Orange
- Pin 3: Purple
- Pin 4: Black
- Pin 5: White
- Pin 6: Green
- Pin 7: Yellow
Product Usage Instructions
Power Supply Connection:
- Connect the Red wire (Pin 1) to the power supply for 5V DC.
- Connect the Black wire (Pin 4) to the power supply ground.
Control Signal Input and Output:
- Connect the Orange wire (Pin 2) to the control signal input.
- Connect the Green wire (Pin 6) to the control signal output.
RS-232 Communication:
- To receive RS-232 data, connect the Purple wire (Pin 3) to RS-232 RXD.
- To transmit RS-232 data, connect the White wire (Pin 5) to RS-232 TXD.
Grounding:
Ensure proper grounding by connecting the Purple wire (Pin 3) to FE/Shield.
Frequently Asked Questions (FAQ):
Q: What is the function of Pin#7 (Yellow wire)?
A: Pin#7 (Yellow wire) is not used for any specific function in this
configuration and can be left unconnected.
Dimensions
FM510-V Dimensions (unit: mm)
FM510-H Dimensions (unit: mm)
Installation
FM510-V Installation
The product has anti-reflective characteristics, ensuring that scanning performance remains unaffected even when the optical axis is perpendicular to the barcode plane.
FM510-H Installation
The product has anti-reflective characteristics, ensuring that scanning performance remains unaffected even when the optical axis is perpendicular to the barcode plane.
Interface pinouts
Pin#| Wire color| Signal| I/O|
Function
---|---|---|---|---
1| Red| 5V DC| P| Power supply
2| Orange| SW IN| I| Control signal input
3| Purple| GND| P| Power supply ground
44| Black| SW OUT| O| Control signal output
5| White| RS 232 RXD| I| RS level 232 receive data
66| Green| RS 232 TXD| O| RS level 232 transmits data
7| Yellow| FE/Shield| –| –
Status indicator/More information
LED status indication:
- Blue LED on: the scanner is in standby mode after powering on.
- Red LED flashes: Indicates an error condition.
- Please consult Newland service for advice.
- Green LED flashes: Indicates a good read/decode.
Visit our website
newland-id.com.