FABRIQUE BBOX1 bitty box Speaker User Guide
- June 3, 2024
- FABRIQUE
Table of Contents
BBOX1 bitty box Speaker
**User Guide
BBOX1 bitty box Speaker
- Turn ON/OFF by pressing the Button for 3 seconds.
- If the speaker makes a beeping sound, this means the speaker needs to be charged.
- Each speaker comes with a keychain which can be placed through an indention/hole on top of the speaker.
PAIRING SPEAKER WITH BLUETOOTH ENABLED DEVICE
- • Turn ON by pressing the Button for 3 seconds.
- A blue LED light will light up then flash quickly, indicating it is in pairing mode.
- In your device’s Bluetooth menu, locate and select “Bitty Box”.
- A tone will sound when pairing is complete.
CONNECTING TO MULTIPLE DEVICES
- Only 1 device can be connected within range.
- To connect a different device in the same range you must first disconnect “Bitty Box” from current connected device.
CHARGING INTERNAL BATTERY
Insert the USB-C end of charging cable into speaker port located on back of speaker. Plug the USB end of charging cable into a USB computer port or USB plug/adapter. Once fully charged the LED indicator light will turn off.
PRODUCT SPECIFICATIONS
- POWER RATING: PO = 1X3W
- TRANSMITTING FREQ.: 20HZ-20KHZ
- THD: <1%
- S/N: >80DB
- SPEAKER PARAMETER: 3W
- BATTERY: 3.7V/250mAH
- INPUT VOLTAGE & CURRENT: 5W1A
- BLUETOOTH VERSION: V5.3
Warning: To reduce the risk of fire or electric shock, do not expose this speaker to rain or moisture (including swimming pools or objects filled with liquids, such as vases or drinks). Warning: Your speaker has an internal rechargeable battery. Improper usage may result in the speaker becoming hot, ignite, or bust and cause injury if exposed to conditions of abuse.
Important Safety Instructions:
- Always read safety and operation instructions before use Retain Instructions for later reference.
- For indoor use only. Do not expose speaker to liquid, moisture or humidity.
- Do not use abrasive cleaners to clean the speaker casing as they may damage the finish. Liquid cleaners can also get inside the speaker and damage internal parts. A simple cloth to wipe away dirt and other particles will do the job nicely. Always unplug the unit before cleaning.
- Do not expose the speaker to extremely high or low temperatures.
- Keep the unit away from direct sunlight.
- Do not attempt to open or modify the speaker in any way as tt does not contain any serviceable parts.
- Please store the speaker in a dry place that is free from extreme temperatures and dust.
- Always operate the speaker on a fiat and level surface.
- If unit is plugged in, always operate away from small children or small animals as they may play with the power cord.
- Do not leave a fully charged battery connected to a charger, overcharging may shorten its lifetime.
- Always dispose of the packaging and speaker in accordance with the local regulations and in a responsible manner.
LIMITED WARRANTY: Bitty Boomers/ Fabrique Innovations Inc. warrants to
the first consumer purchaser that this product, when shipped in its original
container to the original purchaser, will be free from defective workmanship
and materials for one year and agrees that it will, at its option, either
repair the defect or replace the defective product or part thereof at no
charge to the purchaser for parts or labor for the time periods described.
This warranty does not apply to any appearance items of the product nor to the
additional excluded item(s) set forth below nor to any product the exterior of
which has been damaged or defaced which has been subjected to misuse, abnormal
service or handing or which has been altered or modified in design or
construction. The limited warranty described herein is in addition to an
applicable law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR USE ARE LIMITED TO THE PERIOD FROM THE DATE OF ORIGINAL PURCHASE SET FORTH
BELOW. Some states do not allow limitations on how long an implied warranty
last, so the above limitation may not apply to you. Neither the sales
personnel of the seller nor any other person is authorized to make any
warranties other than those described herein or to extend the duration of any
warranties beyond the time period described herein on the behalf of Bitty
Boomers/ Fabrique Innovations Inc. The warranties described herein shall be
the sole and exclusive warranties granted by Bitty Boomers/ Fabrique
Innovations Inc. and shall be the sole and exclusive remedy available to the
purchaser corrections of defects, in the manner and for the period of time
described herein, shall constitute complete fulfillment of all liabilities and
responsibilities of Bitty Boomers/ Fabrique Innovations Inc. to the purchaser
with respect to the product and shall constitute full satisfaction of al
claims, whether based on contract negligence, strict lability or otherwise. In
no event shall Bitty Boomers/ Fabrique Innovations Inc. be liable or in any
way responsible for any incidental of consequential economic or properly
damage. Some states do not allow the exclusion of incidental or consequential
damages, so the above exclusion may not apply to you. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE
TO STATE.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Fabrique Innovations Inc.!
Bitty Boomers is under license. Other trademarks and trade names are those of
their respective owners.
FCC Warning: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
Note : This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to by to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction. This
device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device. 0 2022, Fabrique Innovations Inc.,
© 2022 Bitty Boomers, 2022 Bigger Bitty Boomers,
© 2022 Bitty Box
• Distributed by Fabrique Innovations Inc., New York, NY 10018
•800-511-1595
• All Rights Reserved
**• Made In China
FCC ID: 2AR I 7BBOX1 IC: 24431-BBOX1
HVIN: BBOX1 QDID: 172491 DECL. ID: D056623
For Questions or Technical Support Please Contact:
support@bittyboomers.com**