GuoanVision L1 White WiFi Camera User Manual

GuoanVision L1 White WiFi Camera

Quick Operation Guide

Step 1 Download and install the App

Tips on: Scan the QR code below to download the “iCSee” App.

Step 2 Turn on the power
Power on the camera, and turn on the device, and it will send the “system starting up, wait be configered, Wait for the connection, please configure the network according to the Instructions” prompt after several seconds, If the camera does not have a prompt sound for a long time, you can press and hold the camera Reset button until you hear the prompt ” Restore factory settings, please do not power off “and release it to restore the camera to factory settings and then configure the network.

Note
If you need local storage, please install the memory card first, and then power on the device (the memory card does not support hot swapping, please plug and unplug the memory card when the device is powered off). Cloud storage is recommended, which is safe and convenient. Details See “Step 4” for operation.

Step 3 Configure the network of the camera
Bluetooth network configuration

Note: If the device supports Bluetooth network configuration, please configure it as follows.

1. Connect your phone to the WiFi network and turn on Bluetooth.
2. Open the iCSee app, register an account, and log in (Figure 1).
3. After successful login, Click the “+” button in the top right corner of the screen (Figure 2).
4. Wait for the device to be added to be found, and click “OK” (Figure 3) –
5. Enter the wireless router password and click “Confirm” (Figure 4).
6. Wait for the camera network configuration, when the camera emits the voice message “connecting, please wait, connect router successfully”, the network configuration is successful (Figure 5).
7. After the network configuration is successful, set the camera name(Figure 6).
8. Follow the APP interface to guide you through the setup. After the configuration is completed, the device is displayed in the device list interface. Click to open the real-time preview screen, and carry out relevant operations and settings(Figure 7).

WiFi network configuration

Note: If the device does not support Bluetooth network configuration or Bluetooth network configuration fails, please configure it as follows.

1. Connect your phone to the Wi-Fi network.
2. Login to the iCSee App, click “+” to add devices (Figure 8), and select “WiFi Camera” (Figure 9).
3. Set network configuration according to the camera’s voice prompts and the APP interface step-by-step guide. When the camera emits a “Connect router successfully” prompt, it means that the camera has successfully configured the network.
4. After the network configuration is successful, follow the instructions on the APP interface to set the camera password and name.
5. After the configuration is completed, the device is displayed in the device list interface. Click to open the real-time preview screen, and carry out relevant operations and settings(Figure 10).

Step 4 Cloud Storage
Steps to open cloud storage: click the “cloud” icon in the device list interface (Figure 11), and follow the guidance of the app interface to understand and open the cloud storage package, with a variety of packages available.

FAQ

Q: How do cameras store video?

1. Local TF card storage, maximum support up to 128G TF card after fully automatically deleting the earlier video, overwriting video.
2. Cloud storage.

Q: What to do if the camera is not connected or offline?

1. Check if the camera power or network of the router is normal.
2. Plug the camera power to restart the camera.
3. Restore the camera to factory settings.

Q: Is a 5g router supported ?
If you use a 5g router, 5G and 2.4G use the same connection hotspot (that is, SSID is the same), you can connect directly. If 5G and 2.4G are not the same connection hotspot (that is, SSID is different, generally SSID of 2.4G is xxxxx-2.4G, SSID of 5G is X-5 G), please connect the WiFi of the mobile phone to the hotspot of xxxxx-2.4G of the router before configuring the camera.

Notice

1. Please change the user password while using this product to avoid being misappropriated by criminals.
2. Do not install the device in a place that is damp, dusty, or accessible to children.
3. Please use and store within the allowable temperature and humidity range, and do not disassemble the equipment at will.

Directions

1. Please refer to the actual product, the manual is for reference only.
2. The APP and product firmware will be updated from time to time. You can upgrade to the latest firmware online by yourself without notice. The manual is for reference only.
3. The manual may contain technically inaccurate parts or parts that are inconsistent with product functions or printed errors. Please refer to our company’s final interpretation.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

IC Caution:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

To maintain compliance with RSS-102 RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>