DESIGNERS FOUNTAIN Smart Life App User Guide

: July 25, 2024
: DESIGNERS FOUNTAIN

Table of Contents

DESIGNERS FOUNTAIN Smart Life App
Product Information
Product Usage Instructions
BEFORE YOU BEGIN
ADDING DEVICES TO THE APP
USING THE APP
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DESIGNERS FOUNTAIN Smart Life App

Product Information

Specifications:

App Name: Smart Life
Compatibility: iOS, Android
Wi-Fi Network: 2.4G
Control: Light, Fan

Product Usage Instructions

Set-Up:

Before You Begin:

Download the Smart Life app from the App Store or Google Play.
Ensure your phone/tablet is connected to a 2.4G Wi-Fi network.
Make sure the Smart Life app and fixture are on the same Wi-Fi network.
Grant location access permission to the Smart Life app for the Wi-Fi network.
Ensure your phone/tablet has a strong signal and Bluetooth is turned on.

Adding Devices to the App:

Press and hold for 5 seconds to put the device in pairing mode.
The app will prompt you to discover the device. Click ‘Add Device’.
Enter your Wi-Fi password, follow the app directions, and click ‘Done’ after successful pairing.
If you miss the prompt box, click the + button and go to the Add Device menu to add your fixture.

Using the App:

Light Screen:

Use the color palette slider to select white or color palette.
Press the central button to turn the light on/off.
Slide the color slider to choose a color.
Adjust the brightness using the brightness slider.

Frequently Asked Questions (FAQ):

Q: What should I do if I cannot find my device on the app?
A: Make sure your device is in pairing mode and that it is on the same Wi-Fi network as your phone/tablet. Try restarting both your device and the app, then attempt to add the device again.
Q: How do I change the fan speed using the app?
A: In the Fan Screen, move the speed control slider to manually set the wind speed. You can also choose different fan modes like Sleep Mode, Nature Mode, Smart Mode, or Fresh Mode for auto-adjusting speeds.

BEFORE YOU BEGIN

Download the Smart Life app from the App Store or Google Play.
Make sure to set your phone/tablet to a 2.4G Wi-Fi network.
Make sure the Smart Life app and fixture are within the same Wi-Fi network.
Make sure the Smart Life app has location access permission of the Wi-Fi network.
Please make sure that the phone/tablet has a strong signal and that the Bluetooth is on.

ADDING DEVICES TO THE APP

NOTE: Press and hold for 5 sec, the light will flash for 18 sec, and enter the app pairing mode for 180 sec. During this time, the remote control has no way to control the fan and light; over 180 seconds or after successful pairing, the remote control will work properly.

The app will show a prompt to discover the device.
Click the “Add Device” button to enter the Add Device page.
The app automatically finds the device.
Click “Add” and enter your Wi-Fi password.
Click “Next” and follow the app directions.
After pairing is successfully configured, click “Done”.

NOTE:
If you miss the prompt box, click the + button in the upper right-hand corner. Click the “Add Device” menu. Click the “Lighting” option, and scroll to find your fixture. Follow the instructions on the app to complete adding devices.

USING THE APP

LIGHT SCREEN

Use the color palette slider to select the white palette or color palette.
Press the central button to turn the light on/off.
Slide the color slider to select the desired color.
Adjust the brightness of the light by using the brightness slider.

SCENE SCREEN

Select a scene so that the light can toggle through preset colors.
Scroll down to add a custom scene, if desired.

NIGHTLIGHT
Select the color and brightness to match your nightlight preference.

MUSIC SCREEN

Select a preset theme so that the light will sync with the music that is playing in the room.
Click on the pencil button in the DIY discs to create custom color combinations.

FAN SCREEN

Press the fan on/off button to turn the fan on or off.
Press the sleep mode button to switch the fan mode every 25 sec by changing the wind speed to 1, 1, 2, 1, 1, 2, 0, 1, 1, 2, 1, 0, 1, 0, 1…
Press the nature mode button to switch the fan mode to manual entry.
Press the smart mode button to switch the fan mode every 25 seconds by changing the wind speed to 1,3,2,3,1…
Press the fresh mode button to switch the fan mode every 25 sec by changing the wind speed to 1, 2, 3, 2, 1, 2, 3, 2, 1…
Move the speed control slider to manually set the wind speed.
Set the fan direction button to reverse ↺ or forward ↻ motion.

TIMER SCREEN

Press the + button to add a new timed action.
Set the time and select the days you want the action to take place.
Click “Setting action”, and select an action to assign to the time.

SETTINGS SCREEN

The settings screen gives you options for five additional screens.
Select the state in which the light should power on.
Set the “Do not disturb” slider to the desired mode.
Change the on/off gradient duration.
Select the color and brightness to match your nightlight preference.
Allow the alarm to sound in the open position or turn it off in the closed position.

Google Play is a trademark of Google Inc., Apple and the Apple logo are trademarks of Apple Inc., registered in the United States, and other countries. Google and Apple devices are sold separately, and not affiliated with Designers Fountain.

Designers Fountain