Designers Fountain D280M-8P-OSB Eden 8 Inch Mini Pendant Instruction Manual
- October 30, 2023
- DESIGNERS FOUNTAIN
Table of Contents
Designers Fountain D280M-8P-OSB Eden 8 Inch Mini Pendant
Product Information
- The product is a lamp designed for environmental lighting. The user manual provides assembly and installation instructions for the lamp.
- It is important to turn off the main power at the circuit breaker before installing the fixture to prevent possible shock.All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If the user is unfamiliar with proper electrical wiring connections, they should obtain the services of a qualified electrician.
- The assembly steps for the lamp are provided in the manual along with illustrations. The product comes with a mounting package and all necessary wires and connectors.
Product Usage Instructions
-
Turn off the main power at the circuit breaker before installing the fixture.
-
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
-
Follow the assembly steps provided in the manual to assemble the lamp.
-
All electrical connections must be in accordance with local and
National Electrical Code (N.E.C.) standards. If you are unfamiliarwith proper electrical wiring connections, obtain the services of a qualified electrician. -
Connect the white supply wire from the lamp to the white or identified fixture wire using UL listed wire nuts.
-
Connect the black supply wire from the lamp to the plain or black fixture wire using UL listed wire nuts.
-
Connect the bare or green ground wire from the supply to the bare or green fixture ground wire or ground wire from supply using a green ground screw.
-
Install the bulb into the lamp.
-
Turn on the main power at the circuit breaker and test the lamp to ensure it is working properly.
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture,
in order to prevent possible shock.
GENERAL
- All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
- Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions