Berger And Schr ter SM828S-HH Emergency Light Magnetic Base Instructions
- July 23, 2024
- Berger And Schr ter
Table of Contents
Berger And Schr ter SM828S-HH Emergency Light Magnetic Base
IMPORTANT : To operate the rotating beacon, you require a special licence
in accordance with STVZO §52.
Ask your road licensing authority (road traffic office) about this.
Installation and Operating instructions
The rotating beacon is attached to the vehicle roof by means of a built-in
magnetic base. It should be clearly visible from all sides. As there may be
considerable impact or contact with hanging branches while driving, we also
recommend screwing the light base to the vehicle roof. You will need 3 self-
tapping screws with a diameter of 3 mm (not included). The connection is made
to the 12/24 volt cigarette lighter socket. The cable is approx. 2 m long when
extended.
The LED rotating beacon has 2 possible functions, which can be selected by
pressing the switch button on the 12/24 volt cigarette lighter plug.
Technical Data
- Voltage : 12/24 Volt
- Number of LEDs: 16 PCS high-power LEDs
- Operating modes: ECE R65 all-round flash, ECE R65 single flash
- Dimensions: LxWxH = 110x110x90 mm
- Plug : 12/24 volt plug with selector switch
- Operating integrated for cigarette lighter socket
- temperature : -30°C to +50°C
- E-test number: E965R00/111107200, E910R06/022397700
Disposal:
Electronic devices are recyclable materials and should not be disposed of with
household waste. Dispose of the product at the end of its service life in
accordance with the applicable regulations
Copyright by www.berger-schroeter.de
All rights reserved. No part of these operating instructions may be reproduced in any form or duplicated or processed using electronic, mechanical or chemical processes without the written consent of Berger + Schröter. Technical changes may be made at any time without prior notice. The operating instructions are corrected regularly. We accept no liability for technical and printing errors and their consequences.