SUNCO LIGHTING LS-WP150W-XXK LED Semi Cutoff Wall Pack Light Owner’s Manual
- July 16, 2024
- Sunco Lighting
Table of Contents
SUNCO LIGHTING LS-WP150W-XXK LED Semi Cutoff Wall Pack Light
FAQ
- Q: How can I control the light with photocell?
- A: To control the light using photocell function, close the Photocell cap for power ON/OFF operation, or open it to activate the photocell control function.
- Q: What is the warranty period for this product?
- A: The product is covered by a 5-year limited warranty. Please note that actual performance may vary depending on the end-user environment and application.
FEATURES AND APPLICATIONS
FEATURES
- Built-in dusk-to-dawn photocell
- Three quick mount clips allow quick install and maintenance
- Die-casting aluminum with PC optics lens
- 50,000 hours lifetime
SUITABLE APPLICATIONS
- Warehouses
- Stadiums
- Factories
- Parking Lots
- Shopping Malls
- Supermarkets
- Logistic Centers
- Auto dealerships
USING INSTRUCTIONS
CONSTRUCTION:
- Heavy die-cast aluminum alloy housing with bronze powder-coated finish
OPTICAL SYSTEM:
- High brightness lumileds LED chips
- High quality PC lens optics
- 120° beam angle
ELECTRICAL:
- Available as 120-277V input
- -13°F to 113°F
INSTALLATION & MOUNTING:
- Wall mounting with 3 quick mount clips backside for easy install
CONTROLS & DIMMING:
- 0-10V dimmable
- Photocell is included
WARRANTY
- 5-year limited warranty.
- Actual performance may differ as a result of end-user environment and application.
PERFORMANCE
Model NO| Photocell Control| Wattage| Voltage/Current
Input| Light Efficiency| Kelvin Options
---|---|---|---|---|---
120V| 277V
LS-WP150W-XXK| 3fc ON 13fc OFF| 150W| 1. 25A| 0. 54A| 130LM/W| 5000K
Photocell Control
- Close Photocell cap, light is in the operation of power ON/OFF
- Open Photocell cap, start photocell control function
Electric Characteristic
| Specification/Model | LDS-WP-150W-120V-50K-U |
|---|---|
| LED Driver | UL listed ZHIHE Brand 0-10V |
| Input Power | 150W |
| Lumens Output | 19500LM |
| Efficiency | 130LM/W |
| CRI | ＞72 |
| Color Temperature | 5000K |
| Input Voltage | 120-277VAC |
| Light Distribution Type | 120D |
| Working Temperature | -13 ~ +113°F |
| Junction Temperature | ＜167°F |
| Lamps Efficiency | ≥90% |
| Certificate | ETL CETL DLC |
| Equivalent | 250-400W MH/HPS |
Dimension
Distribution Diagram
Installation Instruction
- Step 1: Turn off the power before installation
- Step 2: Remove the upper cover from fixture by dismounting 2 screws.
- Step 3: Mounting hole size punching
- Step 4: After fixing the wire hole, install the water connection connector.
- Step 5: lnstall the base plateon the wall by fixing 3 screws
- Step 6: Put the cables from the wall through the hole of base plate
- Step 7: Connect the cables according to drawing
- Step 8: Put back the upper cover on the base plate and fixing two screws
Tip: If you choose the default outlet, you can install it directly without opening the cover.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>