photinus Schreder PROTOS 150 Solar LED Street Lighting Installation Guide
- July 11, 2024
- photinus Schreder
Table of Contents
photinus Schreder PROTOS 150 Solar LED Street Lighting
Specifications
- Model: PROTOS 150/275
- Input Voltage: max=120V
- Output Voltage: 12-24VDC
- Control Gear: SELV/PELV
Product Usage Instructions
Parts List
- 1x A
- 1x B
- 1x C
- 2x D
- 1x E
- 1x F
- 4x G
- 4x H
- 6x J
- 4x K
Installation Steps
Follow these steps for proper installation:
- Tighten parts A, B, C, and D to a torque of 30 Nm.
- Tighten parts E, F, G, and H to a torque of 50 Nm.
- Tighten parts J, and K to a torque of 19 Nm.
Mounting Options
Option 1 – Pipe Foundation
Components needed: Concrete Ring, Soil, Battery, Gravel/Sand, Drainage, Concrete/PVC Pipe.
Option 2 – Anchor Base
Components needed: Anchor Base with Opening, Battery placed underground.
Option 3 – Ground Screw Foundation
Pole diameter required: 89 mm for PROTOS 150, and 133 mm for PROTOS 275. Components needed: Pole, Battery, Soil.
Frequently Asked Questions
Q: What is the input voltage for the PROTOS model?
A: The maximum input voltage for the PROTOS model is 120V.
Q: What type of control gear is required for the product?
A: The control gear must be SELV/PELV for proper operation.
Q: What are the tightening torques recommended for installation?
A: Please refer to the installation steps provided in the manual for specific tightening torques for different parts.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>