I LOCK IT Pro Smart Bike Lock Instruction Manual

I LOCK IT Pro Smart Bike Lock

“`html

Specifications

• Scope of Delivery: I LOCK IT Pro, charging
  cable, key fob

• Technical Data: Bluetooth connectivity, GPS
  tracking, smart alarm

• Operating Elements: Smartphone app, key
  fob

Product Usage Instructions

1. Overview

Get familiar with the contents of the package and the technical
specifications of the I LOCK IT Pro.

2. Commissioning

2.1. Charging the Battery : Ensure the battery
is fully charged using the provided charging cable.

2.2. Setting up the I LOCK IT App : Download and
install the I LOCK IT app on your smartphone and follow the setup
instructions.

2.3. Mounting on the Bike : Properly mount the I
LOCK IT Pro on your bike as per the installation guidelines.

3. Operation

3.1. Open I LOCK IT Pro : Use the app or key fob
to unlock the device.

3.2. Close I LOCK IT Pro : Secure your bike by
locking the device using the app or key fob.

3.3. Smart Alarm : Activate the smart alarm
feature for added security.

3.4. GPS Tracking : Use GPS tracking to locate
your bike if it goes missing.

4. Accessories

4.1. I LOCK IT Key Fob : Additional accessory
for convenient operation.

4.2. I LOCK IT Plug-in Cable/Chain : Optional
accessories for enhanced security.

5. Maintenance and Care

5.1. Cleaning : Regularly clean the device to
maintain its functionality.

5.2. Battery Life : Monitor battery life and
recharge as needed.

5.3. Restore Factory Settings : Reset the device
to factory settings if required.

FAQ

Q: Can I LOCK IT Pro be used on multiple bikes?

A: Yes, you can mount and use I LOCK IT Pro on multiple bikes by
following the mounting instructions for each bike.

Q: How can I extend the battery life of I LOCK IT Pro?

A: To extend battery life, ensure to charge the device fully
before initial use and avoid leaving it unused for extended periods
without charging.

Q: What should I do if I forget my smartphone with the

app?

A: In case you forget your smartphone, you can use the key fob
to operate I LOCK IT Pro as an alternative method.

“`

Smart security for your bike
OPERATING INSTRUCTIONS

TABLE OF CONTENTS

1. OVERVIEW

1.1. Scope of delivery

12

1.2. Technical data

12

1.3. Operating elements and connections

13

2. COMMISSIONING

2.1. Charging the battery

14

2.2. Setting up the I LOCK IT app

16

2.3. Mounting on the bike

20

3. OPERATION

3.1. Open I LOCK IT Pro

24

3.2. Close I LOCK IT Pro

28

3.3. Smart alarm

31

3.4. GPS Tracking

33

3.5. Share authorization

36

3.6. Pairing a new smartphone| key fob

37

3.7. Acoustic signals

42

4. ACCESSORIES

4.1. I LOCK IT key fob

45

4.2. I LOCK IT plug-in cable|plug-in chain

50

5. MAINTENANCE AND CARE

5.1. Cleaning

52

5.2. Battery life and low battery level

52

5.3. Restore factory settings

54

6. FURTHER INFORMATION

55

6.1. Optical signals

57

6.2. Acoustic signals

58

6.3. Troubleshooting

GENERAL NOTES AND INFORMATION
FOR YOUR INFORMATION The information in this document is subject to change without notice and does not represent a commitment on the part of haveltec GmbH.
No part of these operating instructions may be reproduced, transmitted in any form or by any means, electronic, mechanical, photocopying or recording, without the prior written permission of haveltec GmbH.
© haveltec GmbH Version 1.0 January 2024
TRADEMARK ® All trademarks are the property of their respective owners.
Bluetooth® and the Bluetooth symbol are trademarks of Bluetooth SIG, Inc.

4

GENERAL NOTES AND INFORMATION

CONTACT
If you have any questions, suggestions or criticism, please contact our service department:
haveltec GmbH Friedrich-Franz-Strasse 19 14770 Brandenburg Germany
E-MAIL: www.ilockit.bike/kontakt WEB: www.ilockit.bike/hilfe

GENERAL NOTES AND INFORMATION

5

BASIC SAFETY INFORMATION
INTENDED USE
I LOCK IT Pro serves as a bicycle lock for locking the rear wheel. I LOCK IT Pro is controlled via a Bluetooth connection to a smartphone that has the I LOCK IT app installed or to a I LOCK IT key fob.
Only use I LOCK IT Pro as described in these operating instructions. Any other use is considered improper and may result in damage to property or even personal injury. The manufacturer accepts no liability for damage caused by improper use.
I LOCK IT Pro is intended for use in the private sector.
Before using your I LOCK IT Pro, please read the safety instructions and operating instructions carefully. Only then can you use all the functions safely and reliably. Keep the operating instructions in a safe place and pass them on to any future owner.

6

BASIC SAFETY INFORMATION

DEFINITION You will find the following signal terms in these instructions:
This symbol indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury.
This symbol indicates a hazard with a low level of risk which, if not avoided, may result in minor or moderate injury.
This symbol indicates important information or useful tips for use.

BASIC SAFETY INFORMATION

7

SAFETY INSTRUCTIONS
Read these notes and follow all instructions.
Risk of electric shock: Excessive mains voltage can lead to an electric shock.
· Only use accessories recommended by us. · Only use a suitable plug-in power supply unit.
Ensure that the correct voltage is applied. You can find more information on this directly on the plug-in power supply unit.
· Check the plug-in power supply unit regularly for damage. Never use the plug-in power supply if its housing is defective or has other visible damage.
· Only use the plug-in power supply unit indoors and not in damp rooms and protect it from dripping and splashing water.
· Never open the housing of the plug-in power supply. · The housing of I LOCK IT Pro must never be
unscrewed or modified. · Unplug the mains adapter from the socket if there is a
risk of thunderstorms.

8

BASIC SAFETY INFORMATION

Explosion hazard: Rechargeable batteries (especially lithium -batteries) can explode if handled improperly.
· Keep I LOCK IT Pro away from heat sources (e.g. ovens, radiators, amplifiers, etc.).
· Under no circumstances should you attempt to dispose of I LOCK IT Pro by burning it.
· Only use accessories and equipment (e.g. battery) that are offered or recommended by us.
· Protect the battery from strong heat, such as direct sunlight, fire, etc.
· Do not place any open sources of fire such as burning candles or similar on or directly next to I LOCK IT Pro.
· If the housing is defective, stop using I LOCK IT Pro and keep it out of the reach of children.
· Only allow qualified service personnel to carry out repair and maintenance work. An inspection and/or repair is necessary if I LOCK IT Pro has been damaged in any way.

BASIC SAFETY INFORMATION

9

Only operate I LOCK IT Pro under the following environmental conditions:
· Min. -20 °C ambient temperature · Max. 40 °C ambient temperature
Only charge the battery under the following ambient conditions:
· Min. 0 °C ambient temperature · Max. 30 °C ambient temperature
The use of I LOCK IT Pro can lead to accidents or malfunctions in certain locations.
· Do not use I LOCK IT Pro in potentially explosive atmospheres.
· Only use Bluetooth® in places where wireless radio transmission is permitted.
I LOCK IT Pro must be checked for the following before each journey:
· Damage · Fixed mounting on the bike frame

10

BASIC SAFETY INFORMATION

After each opening process, it must be checked that I LOCK IT Pro has been fully opened before the journey begins. After each closing operation, check that the striker is completely closed.
Hearing loss due to acoustic tones possible. Do not bring I LOCK IT Pro close to your hearing or activate it.
· ILOCKITPromayonlybefittedtotherearwheel.
· Mounting on motorcycles such as scooters, motorcycles or S-pedelecs (pedelecs with up to 45 km|h assistance) is not permitted.
· The maximum permissible tire width is 70 mm.
If I LOCK IT Pro emits audible tones while riding, I LOCK IT Pro must be taken out of service immediately and customer service must be contacted.
Keep a safe distance from the locking bolt during the closing process, as there is a risk of crushing.
· In the case of painted spokes, the paint may be rubbed off by the locking bolt.

BASIC SAFETY INFORMATION

11

1. OVERVIEW 1.1. SCOPE OF DELIVERY The following accessories are included with I LOCK IT Pro:
· USB-C cable · Mounting screws with washers
· Battery (already pre-installed in I LOCK IT Pro) · Operating instructions · Quickstart Guide

1.2. TECHNICAL DATA

· Dimensions (LxWxH): 148 mm x 40 mm x 150 mm

· Battery:

Li-Ion 3.7 V | 1200 mAh

· USB-C:

DC 5 V | 700 mA

· Weight:

600 g Subject to

technical changes!

12

OVERVIEW

1.3. OPERATING ELEMENTS AND CONNECTIONS
I LOCK IT Button Cover for USB-C Charging port Mounting openings

OVERVIEW

Product label Port for extensions Locking bolt with integrated spoke evasion system
13

2. COMMISSIONING
2.1. CHARGING THE BATTERY Before using your I LOCK IT Pro for the first time, you should fully charge the battery. To do this, carry out the following steps:
I. Open the USB-C cover on the right-hand side of I LOCK IT Pro.
II. Connect the supplied USB cable to the USB-C charging port on the I LOCK IT Pro.

14

COMMISSIONING

III. Connect the USB cable to a USB power supply unit, battery pack or the USB port of a computer.
To charge I LOCK IT Pro, only use power sources that supply the USB output with 5 V direct current (DC).
While I LOCK IT Pro is charging, the button lights up red. When the battery is full, the LED goes out. The charging time depends on the charge status and the power supply unit used.
If there is no power socket near the bike, we recommend charging it using a battery pack to avoid removing it from the bike.
IV. As soon as I LOCK IT Pro is fully charged, you can remove the USB-C cable and close the USB-C cover again.
If the battery reaches a low charge level, an acoustic warning tone is emitted each time the lock is opened. The battery should then be recharged to ensure that I LOCK IT Pro is always ready for use.

COMMISSIONING

15

2.2. SETTING UP THE I LOCK IT APP
Once fully charged, you can connect your I LOCK IT Pro to your smartphone.

The following steps can only be carried out when setting up a smartphone for the first time. If another smartphone or a key fob is to be set up, please follow the steps in chapter 3.6.

I. Download the I LOCK IT app:

I LOCK IT Bike lock app

I LOCK IT Bicycle lock

16

COMMISSIONING

The Bluetooth functionality of your smartphone must be switched on before starting the I LOCK IT app.
II. Then install and start the app on your smartphone.
III. Register in the I LOCK IT app and activate your account.
IV. Log in with your account.
V. Follow the further instructions in the app to set up your I LOCK IT Pro.
The initial setup of a smartphone is only possible if I LOCK IT Pro is in setup mode. This is indicated by the button flashing blue. Follow the instructions in the app to set I LOCK IT Pro to set-up mode.

COMMISSIONING

17

Once the initial setup has been successfully completed, the I LOCK IT app establishes a secure connection to your I LOCK IT Pro. As soon as the process is complete, the I LOCK IT Pro button lights up blue for 5 seconds and the I LOCK IT app confirms the successful pairing.
If the blue LED goes out before a connection has been established, the button must be pressed again to enable the connection.
When you first set up I LOCK IT Pro with the I LOCK IT app, you define your personal color code. This is used to open I LOCK IT Pro if there is no Bluetooth connection to the smartphone or hand-held transmitter and should not be passed on to third parties. The color code can be viewed and changed via the I LOCK IT app.
The personal color code is extremely important and must be kept safe by you!

18

COMMISSIONING

· You can manage several different I LOCK IT with the I LOCK IT app.
· In the I LOCK IT app, you can select which I LOCK IT you want to connect to. Individual configurations can also be made.
· Your smartphone can only be connected to one I LOCK IT at a time.

COMMISSIONING

19

2.3. MOUNTING ON THE BIKE
I LOCK IT Pro is firmly attached to the seat stays of your bike. I LOCK IT Pro has four different openings for mounting. Through these openings I LOCK IT Pro must be mounted at the optimum height.
I LOCK IT Pro may only be mounted on the rear wheel. Mounting on motorcycles such as scooters, motorcycles or S-pedelecs (pedelecs with up to 45 km|h assistance) is not permitted.
ASSEMBLY FOR BICYCLES WITH THREADED BUSHES
If your bike already has threaded bushes for screwing on frame locks, please follow these instructions:
Most city, trekking and e-bikes have threaded bushings. On some models, these may be protected by plastic covers. These covers must be removed before installing I LOCK IT Pro.

20

COMMISSIONING

I. Guide I LOCK IT Pro over your mudguard|tyre.
II. Screw I LOCK IT Pro to the bike frame hand-tight using an Allen key (3 Nm). Use the supplied mounting screws for this.
Our I LOCK IT channel at www.youtube.de provides a video on the subject of installation. www.youtube.com/ILOCKIT-bike

COMMISSIONING

21

ASSEMBLY FOR BICYCLES WITHOUT THREADED BUSHES If your bike does not have threaded bushes for mounting I LOCK IT Pro, then I LOCK IT Pro can be mounted easily and securely with the optionally available installation adapters.
To do this, carry out the following steps:
The installation adapters have flexible screw mounts that can be adjusted laterally. This allows even more leeway in the frame width of the bike.
I. Attach the appropriate installation adapter to one of the frame struts.
II. Guide the plastic straps (1) around the strut and then through the openings on the installation adapter.
III. Insert the plastic screws into the installation adapter.
IV. Use a suitable screwdriver to tighten the installation adapter by turning the plastic screw.

22

COMMISSIONING

V. Repeat the process for the second installation adapter.
VI. Guide I LOCK IT Pro over your mudguard|tyre.
VII. Screw I LOCK IT Pro to the threaded sockets of the installation adapter using an Allen key hand-tight (3 Nm). Use the mounting screws supplied with I LOCK IT Pro for this.
The protruding plastic straps of the installation adapter can be removed with a side cutter.

COMMISSIONING

23

3. OPERATION
3.1. OPEN I LOCK IT PRO I LOCK IT Pro offers several options for opening:
AUTOMATIC OPENING If automatic opening is activated in the settings, I LOCK IT Pro opens automatically as soon as you come close to it. The distance at which I LOCK IT opens can be configured in different levels via the app.
The I LOCK IT app must be active in the background on your smartphone and the Bluetooth functionality of your smartphone must be switched on.
After successful opening, the I LOCK IT Pro button lights up green and your ride can begin.
Automatic opening only takes place if you are at least 10 m away from your bike after locking it using your smartphone or button.

24

OPERATION

The distance is determined by the signal strength between I LOCK IT Pro and your smartphone. This signal strength changes depending on where you keep your smartphone. For example, I LOCK IT Pro may open earlier if you are holding your smartphone in your hand and later if you are carrying it in your trouser pocket.
If the bike is not moved after opening and the smartphone leaves the Bluetooth range again, I LOCK IT Pro locks automatically. This serves as protection so that your bike is not unintentionally left unlocked.
OPEN AT THE TOUCH OF A BUTTON
In addition to automatic opening, I LOCK IT Pro can be opened by briefly pressing the I LOCK IT Pro button. After successful opening, the button lights up green and your journey can begin.
· Opening at the touch of a button only works if your smartphone is nearby and the I LOCK IT App is connected to your I LOCK IT Pro.

OPERATION

25

· If the smartphone is connected to I LOCK IT Pro but is not in the vicinity of I LOCK IT Pro, then the color code entry starts.
OPEN VIA SMARTPHONE
Another option is to open your I LOCK IT Pro via the I LOCK IT app. To do this, press the “Open I LOCK IT” button on the app home screen or click directly on the lock graphic. As soon as I LOCK IT Pro is opened, the text changes to “Close I LOCK IT” and the I LOCK IT Pro button lights up green for 5 seconds.
OPEN BY COLOR CODE
If you have forgotten your smartphone or your smartphone battery is empty, I LOCK IT Pro can be opened using your personal color code. The color code is defined when the I LOCK IT app is first set up and can be changed via the app.
The personal color code is extremely important and must be kept safe by you!

26

OPERATION

The color code can only be entered if there is no active Bluetooth connection between your smartphone and I LOCK IT Pro or if the smartphone is out of range for opening by pressing a button.
Follow the instructions to enter the color code:
I. Press the button repeatedly until it displays the desired 1st color. The colors appear in this order: green, blue, red, white.
II. Wait until the button stops lighting up and repeat the process for the next color.
III. Repeat the process for all 6 colors.
After entering the correct color code, I LOCK IT Pro opens. If an incorrect code is entered, the LED flashes red and you can then start a new color code entry.
· After entering a color, you have 5 seconds to start the next entry.
· An incomplete entry is canceled after 5 seconds and indicated by 3 flashes.
· If the color code is entered incorrectly 5 times within 3 minutes, then the entry is blocked for 3 minutes.

OPERATION

27

Our I LOCK IT channel at www.youtube.de provides a video on the subject of color coding. www.youtube.com/ILOCKIT-bike
3.2. CLOSING I LOCK IT PRO
I LOCK IT Pro offers several locking options:
I LOCK IT Pro can only be locked when the bike is not in motion. If an attempt is made to lock I LOCK IT Pro while riding, the button flashes red, an acoustic warning tone sounds and no locking process takes place.
CLOSE AT THE TOUCH OF A BUTTON I LOCK IT Pro can be closed by pressing a button. To do this, press the I LOCK IT Pro button twice in quick succession. The button then briefly lights up red. Before the locking process, I LOCK IT Pro emits an acoustic signal to indicate that it is about to be locked. After successful locking, the button lights up red.
The locking sound can be deactivated in the settings menu of the I LOCK IT app.

28

OPERATION

CLOSE VIA SMARTPHONE You can also close your I LOCK IT Pro using the I LOCK IT app. To do this, press the “Close I LOCK IT” button on the home screen or click directly on the lock graphic. Before the locking process, I LOCK IT Pro emits an acoustic signal to indicate that it is about to be locked.
The locking sound can be deactivated in the settings menu of the I LOCK IT app.
As soon as I LOCK IT Pro is closed, the text changes to ” I LOCK IT open”, the I LOCK IT Pro button lights up red for 5 seconds and your bike is secured.
If there is no Bluetooth connection between the smartphone and I LOCK IT Pro, the “Close I LOCK IT” button is not displayed.
CLOSE BY EXTENSION I LOCK IT Pro automatically recognizes when accessories such as an plug-in chain or the plug-in cable are plugged in. Insertion automatically triggers a locking process and also automatically locks the plug-in chain or cable.

OPERATION

29

INTEGRATED SPOKE EVASION FUNCTION
I LOCK IT Pro is equipped with an integrated dynamic spoke evasion system (DSA system). This means that bicycle spokes are no obstacle to the locking process. This system ensures that the sharpened lock shackle can be moved past the spoke without any problems and I LOCK IT Pro reliably secures your bike.
In individual cases it can nevertheless occur that I LOCK IT Pro is blocked when locking and moves back again. In this case, the lock emits an acoustic signal (if the warning tones are activated) and you receive a message in the I LOCK IT app or via the key fob.

30

OPERATION

3.3. SMART ALARM If the theft alarm is activated in the I LOCK IT settings and your I LOCK IT Pro is locked, I LOCK IT Pro triggers an audible alarm as soon as your bike is lifted and moved.
The smart alarm analyzes the strength and duration of the movement and uses a short pre-alarm to signal that the theft alarm is activated.
If the unauthorized movement of the bike continues, an alarm is triggered for 30 seconds.
The alarm can be configured in the I LOCK IT app.
If your bike continues to be moved after the alarm has expired, the alarm will sound again for 30 seconds.
I LOCK IT Pro cannot be opened while the audible alarm is active.
As soon as the alarm is triggered, you receive a message directly on your smartphone and by e-mail.

OPERATION

31

If you are within Bluetooth range of your I LOCK IT Pro, you can deactivate the audible alarm before the 30 seconds have elapsed by pressing the “All ok” button.
You will only receive an alarm message on your smartphone or by e-mail if I LOCK IT Pro is not connected to your smartphone via Bluetooth and if there is sufficient mobile phone reception.
The “Silent alarm” function can be used to deactivate the audible alarm on I LOCK IT Pro while the alarm notification is still sent to the smartphone in the event of movement.

32

OPERATION

3.4. GPS TRACKING
The GPS tracking function can only be used when the I LOCK IT is locked and the alarm system is switched on (acoustic or silent alarm).
If a theft alarm is triggered on your bike, I LOCK IT automatically activates the GPS tracking function.
You can now use the I LOCK IT app to track the current location of your I LOCK IT.
As soon as your bike is not moved for a longer period of time, I LOCK IT deactivates the GPS functionality again to save energy. GPS tracking is reactivated when the bike is moved again.
· The GPS tracking functionality is only activated if you are not within Bluetooth range when the alarm is triggered.
· The transmission of location data is only possible if sufficient mobile phone reception is available.

OPERATION

33

· After activating the GPS tracking function, it may take several minutes to localize the current location via GPS. GPS reception in buildings is generally not possible.
· GPS localization has a high energy consumption. So that you can track your bike for as long as possible in the event of theft, we recommend that you charge your I LOCK IT regularly, even if the battery level has not yet reached a critical level.

SIGNAL TONE FUNCTION
With the signal tone function, you can trigger a short tone on your I LOCK IT via the I LOCK IT app. This helps you to find your I LOCK IT when you are nearby.
– To be able to use the signal tone function, your I LOCK IT Pro must be within Bluetooth range and the I LOCK IT App must be connected to your I LOCK IT Pro.
– The function can be found in the GPS Tracking menu of the I LOCK IT app.

34

OPERATION

PROXIMITY LOCATION FUNCTION
The GPS accuracy can deviate several meters from the actual location of your bike depending on the surrounding situation. In these situations, the proximity function can help you to locate your bike.
As soon as your I LOCK IT Pro is within Bluetooth range, the proximity screen in the I LOCK IT app shows you whether you are currently approaching your bike or traveling in the opposite direction.
The stronger the Bluetooth signal, the closer your bike is to I LOCK IT Pro.
– The function can be found in the GPS Tracking menu of the I LOCK IT app.

OPERATION

35

3.5. SHARE AUTHORIZATION
To lend your bike equipped with I LOCK IT Pro to friends or family, you can create and share a color code in the I LOCK IT app. This color code allows you to open I LOCK IT Pro without having to install the I LOCK IT app on another smartphone.
To do this, go to the settings menu in the I LOCK IT app. Under “Share” you can generate, share, change and deactivate a color code. If the color code is changed, the last color code displayed is automatically deactivated.
· To create a color code, your I LOCK IT App must be connected to your I LOCK IT Pro.
· Your personal color code, which you defined during the initial setup, should not be passed on. This personal color code provides permanent access to your I LOCK IT Pro.
· If several people use your bike permanently, it makes sense to connect additional smartphones to your I LOCK IT Pro.

36

OPERATION

3.6. PAIRING A NEW SMARTPHONE|KEY FOB
The settings made in I LOCK IT Pro are valid for all users and can also be changed by any connected smartphone. A maximum of 8 smartphones or keyfobs can be programmed to I LOCK IT Pro.
To connect another device to I LOCK IT Pro, it is necessary to set I LOCK IT Pro to set-up mode. Only in this mode can a new device establish a connection to I LOCK IT Pro.
There are several ways to put I LOCK IT Pro into set-up mode.

OPERATION

37

START SETUP MODE VIA THE I LOCK IT APP To set your I LOCK IT Pro to set-up mode via the I LOCK IT app, carry out the following steps:
I. Open the I LOCK IT app on the smartphone you have already set up.
II. Go to the settings menu and open the “Share” submenu.
III. Select the ” Pair another smartphone” option.
IV. Read and confirm the note. I LOCK IT Pro switches to set-up mode and the button starts flashing blue.
Setup mode can only be established if the I LOCK IT app is connected to your I LOCK IT Pro.

38

OPERATION

START SETUP MODE VIA THE KEY FOB To set your I LOCK IT Pro to set-up mode via a connected key fob, carry out the following steps:
I. Make sure that the key fob is connected to your I LOCK IT Pro.
II. Press and hold the key fob button for at least 6 seconds and then release the button. I LOCK IT Pro switches to set-up mode and the I LOCK IT button starts flashing blue.
START SETUP MODE VIA THE COLOR CODE If you have lost your set-up smartphone or the key fob or if they are defective, you can also start set-up mode using the color code configured during initial set-up.
I. Open your I LOCK IT Pro by entering your personal color code, which you defined when you first set up the I LOCK IT app.

OPERATION

39

The color code can only be entered if no Bluetooth connection to your I LOCK IT Pro is active. The following steps do not work with a color code created for sharing.
II. Wait until I LOCK IT Pro is open and the button lights up green.
III. Press the I LOCK IT Pro button and keep it pressed until it lights up blue. As soon as the button is released, the I LOCK IT to set-up mode and the button starts flashing blue.
Our I LOCK IT channel at www.youtube.de provides a video on the subject of color code. www.youtube.com/ILOCKITbike

PAIRING A NEW SMARTPHONE As soon as you have started the set-up mode and the I LOCK IT button flashes blue, you can continue with the following steps: I. Open the I LOCK IT app on the new smartphone.
II. Follow the instructions in the app.

40

OPERATION

III. As soon as the I LOCK IT Pro button lights up blue for 5 seconds and the app confirms successful pairing, the new smartphone is also connected to I LOCK IT.
· You can manage various I LOCK IT with the I LOCK IT app.
· In the app, you can select which I LOCK IT you want to connect to. Individual configurations can also be made.
· Your smartphone can only be connected to one I LOCK IT at a time.
PAIRING A KEY FOB As soon as you have started the set-up mode and the I LOCK IT button flashes blue, you can continue with the following steps:
Press the key fob button.

OPERATION

41

As soon as the key fob LED and the I LOCK IT Pro button light up blue for 5 seconds, a permanent connection has been established between the key fob and I LOCK IT Pro.
The key fob must be in the factory settings for this.
3.7. ACOUSTIC SIGNALS
WARNING TONES I LOCK IT Pro emits warning tones in various situations (e.g. unsuccessful unlocking or locking). These tones can be switched off and on using the slider in the I LOCK IT app.
If the warning tones are deactivated, the I LOCK IT Pro button continues to flash red in the event of a warning, but there is no audible warning.

42

OPERATION

CLOSURE TONE
A short acoustic tone is emitted to inform the user that the lock is about to be closed. This sound can be activated and deactivated using the slide control in the I LOCK IT app. If this function is deactivated, there is no acoustic signal before locking.
OPENING TONE
The unlocking tone generates a short acoustic signal after successfully unlocking I LOCK IT Pro. This sound can be activated and deactivated using the slider in the I LOCK IT app.

OPERATION

43

4. ACCESSORIES The following accessories can be purchased in addition to I LOCK IT Pro:
· Key fob · Plug-in cable · Plug-in chain · Installation adapter · Smartphone holder
If you are interested in other accessories, please visit our online store at www.ilockit.bike.
Buy accessories now.

44

ACCESSORIES

4.1. I LOCK IT KEY FOB The key fob allows you to use your I LOCK IT Pro without a smartphone. You can use the key fob and the Smartphone in parallel, a simultaneous Bluetooth connection of both devices with I LOCK IT Pro is possible. The key fob is powered by a button cell (CR2032) and notifies you of important information from your I LOCK IT Pro thanks to its status LED. It also provides acoustic feedback and you will be notified by an acoustic signal in the event of an alarm within Bluetooth range.
Status LED
Key fob button
Fastening eyelet
Batterycover opening

ACCESSORIES

45

INITIAL SETUP VIA I LOCK IT APP To set up the key fob, a smartphone must first be set up on your I LOCK IT Pro.
I. Open the I LOCK IT app on the smartphone you have already set up.
II. Open the settings menu and then the ” Key fob” submenu.
III. Click on ” Pair key fob”.
IV. Confirm the message.
V. Your I LOCK IT Pro is now in set-up mode and the I LOCK IT button flashes blue.
VI. Press the button on the key fob.
VII. The key fob LED starts flashing blue. As soon as the key fob LED and the I LOCK IT Pro button light up blue for 5 seconds, a permanent connection between the key fob and I LOCK IT Pro has been established.

46

ACCESSORIES

OPERATION
Briefly pressing the key fob button establishes a connection between the key fob and the configured I LOCK IT Pro (if within range). As soon as the connection is established, the key fob LED lights up blue for 5 seconds and an opening or locking process takes place immediately.
When leaving the Bluetooth range (e.g. after parking and leaving the bike), the connection is disconnected and the key fob switches to energy-saving mode.
After pressing the key fob button, the LED lights up blue and a short confirmation tone is emitted. This indicates that a command has been sent to I LOCK IT Pro. The command can only be transmitted if I LOCK IT Pro is within range.
DEACTIVATE ALARM
If the audible alarm of your I LOCK IT Pro is triggered and there is a connection to the key fob, the key fob LED starts to flash red. The audible alarm can be deactivated before the 30 seconds have elapsed by briefly pressing the key fob button.

ACCESSORIES

47

MAINTENANCE BATTERY LEVEL AND BATTERY REPLACEMENT As soon as the battery level of your key fob reaches a critical level, the key fob LED starts flashing red. When this happens, the battery should be replaced to ensure continued reliable operation.
Carry out the following steps to replace the key fob battery:
I. Open the battery cover.
II. Remove the old battery and dispose of it properly.
III. Insert a new battery into the battery compartment and close the battery cover.
The key fob is now fully operational again.
All settings are retained during the battery change and no new initial setup is required.

48

ACCESSORIES

RESTORE FACTORY SETTINGS If the key fob is reset to factory settings, the connection between I LOCK IT Pro and the key fob is deleted. The key fob can then be connected to a new I LOCK IT Pro.
The following steps must be carried out to reset the key fob to the factory settings:
I. Open the battery cover and remove the battery.
II. Press and hold the key fob button.
III. Reinsert the battery in the key fob (keep the button pressed).
IV. Release the key fob button after approx. 5 seconds.
If the key fob LED flashes blue, the process was successful and the key fob has been reset to the factory settings.
To reconnect the key fob to an I LOCK IT, the initial setup must be carried out again.

ACCESSORIES

49

4.2. I LOCK IT PLUG-IN CABLE | PLUG-IN CHAIN The plug-in cable and the plug-in chain allow you to additionally lock your bike with a fixed object.
To do this, carry out the following steps:
I. Place the cable/chain around a fixed object (e.g. a bicycle stand).
II. Guide the plug on one end of the cable|chain through the loop on the other end of the cable|chain.
III. Pull on the cable|chain to reduce the loop size.
IV. Insert the plug all the way into the opening provided on your I LOCK IT Pro and make sure that it is firmly seated.
As soon as I LOCK IT Pro detects that an extension has been inserted, it automatically performs a locking process. Your extension and your bike are locked automatically.

50

ACCESSORIES

· It is possible to insert the cable|chain into an already locked I LOCK IT Pro. The extension is then locked automatically.

ACCESSORIES

51

5. MAINTENANCE AND CARE
5.1. CLEANING
I LOCK IT Pro is insensitive to splashing water and can be cleaned with a damp cloth or sponge. To ensure reliable operation, dirt should also be regularly removed from the locking bar.
· Cleaning with a high-pressure cleaner is not permitted and can lead to damage to I LOCK IT Pro.
· Do not use chemicals to clean I LOCK IT Pro.

5.2. BATTERY LIFE AND LOW BATTERY LEVEL
The rechargeable battery integrated in I LOCK IT Pro supplies the lock with energy for approximately one cycling season. The actual runtime depends on various factors such as the ambient temperature, the frequency of use and the alarm setting.
If the battery reaches a low charge level, an acoustic warning tone is emitted each time the lock is opened. The battery should then be recharged to prevent I LOCK IT Pro from failing.

52

MAINTENANCE AND CARE

· If I LOCK IT Pro runs out of power, it stops functioning and remains in its last state.
· Opening|closing and the alarm function are not possible when the battery is exhausted.
· By connecting a charger or a power bank, I LOCK IT Pro is immediately ready for use again and can be opened or closed.
The GPS functionality of your I LOCK IT Pro has an increased energy requirement. If the battery level is low, it may no longer be usable, although your I LOCK IT Pro can still be operated.

MAINTENANCE AND CARE

53

5.3. RESTORE FACTORY SETTINGS
To restore the factory settings of your I LOCK IT Pro, carry out the following steps:
I. Open the I LOCK IT app and make sure that the connection to your I LOCK IT Pro is active.
II. Open the “Settings” in the menu and open the “My I LOCK IT” submenu.
III. Press the “Restore factory settings” button.
IV. Confirm the warning message. Your I LOCK IT Pro will now be reset to the factory settings.
· Resetting your I LOCK IT Pro will reset all settings to the default settings, delete the color code and all connected devices.
· The smartphone must be re-learned after resetting.
· The key fob must also be reset to the factory settings and then reprogrammed.

54

MAINTENANCE AND CARE

6. FURTHER INFORMATION
6.1. OPTICAL SIGNALS The I LOCK IT Pro button serves as a visual indicator that can display various statuses. The following signals are displayed.
BLUE LED FLASHES · If the blue light flashes continuously, I LOCK IT Pro is in setup mode: A new connection to your I LOCK IT Pro can be established. · If the blue light flashes 3 times, the connection to your smartphone or the key fob has been lost.
BLUE LED LIGHTS UP · A new connection has been successfully established. · The existing connection was re-established after a disconnection.

FURTHER INFORMATION

55

GREEN LED LIGHTS UP · During opening process: I LOCK IT Pro was opened successfully. · When pressed: Color code input starts with 1st color
RED LED LIGHTS UP · During locking process: I LOCK IT Pro has been successfully locked. · When charging: The I LOCK IT Pro battery is currently being charged.
RED LED FLASHES · When locking: Locking is not possible because the bike is in motion or the locking bar is blocked by an obstacle. · When entering a color code: An incorrect code was entered or the code entry was aborted because too much time was required. · For color code input: The color code input is blocked due to repeated failed attempts.

56

FURTHER INFORMATION

6.2. ACOUSTIC SIGNALS In addition to the visual signals, I LOCK IT Pro has several acoustic signals, which are explained below.
1 – TIMES SOUND · Announcement that I LOCK IT Pro is starting to close.
3 – TIMES SOUND · Unable to lock or unlock as the bicycle was in motion. · Locking or unlocking not possible as a resistance blocks the locking bar
5 – TIMES SOUND · Low battery status, I LOCK IT Pro should be charged soon to ensure continuous operational readiness.

FURTHER INFORMATION

57

3 – TIMES SHORT SOUND · The smart alarm was activated by movement and the pre- alarm was triggered.
SUSTAINED ACOUSTIC SOUND · The theft alarm was triggered by movement.

58

FURTHER INFORMATION

6.3. PROBLEM ASSISTANCE
If you experience any problems with your I LOCK IT Pro, please contact our customer service team. We are available by phone or email and will be happy to help you.
You can also find help for various situations on our website www.ilockit.bike/hilfe.
Please note that improper opening of I LOCK IT Pro may invalidate your warranty.

FURTHER INFORMATION

59

E-MAIL: www.ilockit.bike/kontakt WEB: www.ilockit.bike/hilfe
60

References

• I LOCK IT - smarte Sicherheit für Ihr Fahrrad
• I LOCK IT Serviceportal
• Wir sind für Sie da - I LOCK IT kontaktieren
• YouTube
• YouTube

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>