JGT M40 Moon Shaped Music Aurora Projector Lamp Instruction Manual
- July 9, 2024
- JGT
Table of Contents
**JGT M40 Moon Shaped Music Aurora Projector Lamp Instruction Manual
**
Accessory Description
- Moonshape Music Aurora Projector Lamp x1
Remote control x 1
Data cable x 1
Manual x 1
Product Display
Description of buttons
Aurora Projection
Short press: on/colour switching/off
Long press: Off
Double press: Rhythm Mode-On/Off
Glow Projection
Short press : on/color switching/off
Long press: off
Time
Short press: Time – show/hide
Long press: Enter time setting
Setting status – Short Press : Decrease value
Setting status – Short Press : Increase value
Setting status – Long Press : Switch hour/minut
(Connect Bluetooth to calibrate the time automatically)
Audio Speaker
Long press : Audio – on/off
Double-click : Open/disconnect
Short press : Answer/hang up on incoming calls
Speaker Connection : When the speaker is turned on, it automatically
enters the search mode, and find “M40” in the connection page of the mobile
device to connect.
(The speaker will be turned off automatically if it is not connected for 10
minutes.)
Alarm Clock
Short press : Alarm clock–on/off
Long press : Enter alarm setting
Setting status – Short press : Decrease value
Setting status – Short press : Increase value
Setting status – Long press : Switch hour/minute
(When the alarm goes off, tap the product to turn it off)
Remote Control Instructions
- Main switch of the whole machine
- Aurora Brightness Reduction
- Aurora switch/Colour switch
- Aurora Brightness Increase
- Red glow
- Glow mode (two modes)
- Green glow
- Rotation speed (three speeds)
- Aurora mode (three modes)
- Rhythmic mode switch
- Timing (05 hours, 1 hour, 2 hours) Red aurora flashing: timed on Green aurora flashing: timed off
Product Parameter
Product name:
Moon shape Music Aurora Projector Light
Product model: M 40
Material : ABS/PC
Product Size: 154×132×62mm
Net weight: ≈441g
Input: USB DC5V/2A
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>