HOTWAV Note 13 Pro Smartphone User Manual

HOTWAV Note 13 Pro Smartphone User Manual

Product Disruption

In The Box

• Power adaptor

• USB-Charger cable

• Tempered film

• Phone case

• Card Removal Needle

Turning the device on and off

Press and hold the Power key for a few seconds to turn on the device. To turn off the device, press and hold the Power key, and then tap Power off.

Sending messages or multimedia messages

Messages

• Open the Messages
• Tap New Message
• Enter a phone number or a contact from your Contacts List
• Type your message into the messaging field.
• After your message is finished, Tap

Multimedia Messages

• Tap the paper-clip icon on the New Messages screen
• Tap the photo or video you want to attach or you can take a new picture or video.
• After your message is finished. Tap

Language settings

• Open the Settings app then tap “System”
• Tap “Language&input” Tap “Languages Tap “Add Languages
• Once your preferred language has been added, make it your Android’s default language by pressing firmly on the two horizontal lines and moving it to the top.

SAR

• The maximum electromagnetic radiation absorption ratio(SAR) of this product is < 2.0 W/kg..
• In line with the requirements of national standard GB 21288-2007.

Safety – In order to ensure safely using the product, you must strictly

abide by the following advice

• The phone should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
• Do not expose the device or the battery to a high-temperature environment such as sunlight, heaters, microwave ovens, ovens, or water heaters, etc. Overheating of the battery may cause its explosion.
• When charging is complete or not in use, disconnect the charger from the device and unplug the charger from the electrical socket.
• Use of an unapproved or incompatible power source, charger or battery may cause fire, explosion or other hazards.
• Do not disassemble or reset the battery and avoid battery contact with water or other liquids so as to prevent battery leakage, overheating. fires or explosions
• Do not drop, crush, scratch or puncture the battery so as to avoid subjecting the battery to excessive external pressure and the resultant short-circuit and overheating of the battery.
• The battery or the phone manufacturer does not bear responsibility for accidents caused by the use of non-standard charging equipment.
• For more information, please visit “www.hotwav.com“.

Maintenance

• Proper use is important for the phone to work safely and effectively, also can extend the service life to the greatest extent.
• Please follow the instructions in the manual to open the phone, and do not try any other methods.
• Please avoid dropping, knocking or violently handling of the phone. Rough treatment can damage the screen, the internal circuit board or other components.
• Do not use any strong cleaning agent or solvent cleaner to clean your phone. Wipe the phone case with a soft cotton cloth dampened with water or mild water solution.
• Clean the camera lens with clean, dry, soft and non-abrasive cloth.
• If you encounter any software crash and the phone stops responding, please properly remove the back cover and the battery, then put the battery back in and restart the phone.
• When the battery charger is not in use, please unplug it from the electrical socket. If the battery is fully charged, please disconnect the charger from your phone as it may affect the battery life in the long term.
• If phone calls can not be connected, check if you have accessed the right cellular network. Check if you have not set call barring for the phone number you are dialling. Check if you have not set call barring for the incoming phone number.
• If your voice can not be heard or heard well on the other end of a phone call, check if you are covering the built-in microphone. Check if the microphone is close enough to your mouth. If you are using an earphone, check if it is properly connected.

HOT WAV Warranty Information

Thank you for using HOT WAV mobile phone. We will provide our product with comprehensive warranty services in accordance with applicable national laws and regulations.

1. Your warranty is only valid under normal use of your device. All man-made damages and any of the following conditions are out of free warranty.
   A. The warranty period has expired;
   B. Damage caused by Thurman factors, including damages caused by usage under improper operating environment and failure to properly follow instructions on the user manual.
   C. The customer disassembles, repairs or modifies the device without the Company’s authorisation;
   D. Carnage caused by a force mature (such as floods, fires, earthquakes,etc).
   E. The user is unable to provide the warranty card and valid proof of purchase or the product model and bar code do not match or are  altered;
   F. Faults, damages or defects not caused by the company:
   G. Natural wear and tear of the product (such as casing, keypad, display screen, antenna and other accessories):
   H. Bar code and warranty labels are damaged and unrecognisable,

2. Others.
   A. A valid warranty card is per-requisite for claiming warranty
   B. The warranty card contains important information related to your product. Please preserve it for your future reference.
   C. External damages lincluding wear, tear, and scratches) are not entitled to the warranty service;
   D. Our warranty does not cover services verbally promised by dealers that violate principles set forth on the warranty card,

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>