HOTWAV W10 Pro Smartphone User Manual

HOTWAV W10 Pro Smartphone

OVERVIEW

Turning the device on and off
Press and hold the Power key for a few seconds to turn on the device. To turn off the device, press and hold the Power key, and then tap Power off.

Sending messages or multimedia messages

Messages

• Open Conversation.
• Tap “Start chat”.
• Enter a phone number.
• Type your message into the messaging field.
• After your message is finished, Tap ****.

Multimedia Messages

• Tap the camera icon next to the text field.
• Tap the photo or video you want to attach or you can take a new picture or video.
• After your message is finished, Tap ****.

Language settings

• Open the Settings app, then tap “System*
• Tap “Language&input” Tap “Languages Tap “Add Lanquages”
• Once your preferred language has been added, make it your Android’s default lanquage by pressing firmly on the two horizontal lines and moving it to the top.

SAR
The maximum electromagnetic radiation abortion ratio|SARI of this product is < 2.0 W/kg.

• In line with the requirements of national standard GB 21288-2007.

Safety

In order to ensure safely using the product you must strictly abide by the following rules

• The phone should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
• Do not expose the device or the battery to a high-temperature environment such as sunlight, heaters, microwave ovens, ovens, or water heaters, etc. Overheating of the battery may cause its explosion.
• When charging is complete or not in use, disconnect the charger from the device and unplug the charger from the electrical socket.
• Use of an unapproved or incompatible power source, charger or battery may cause fire, explosion or other hazards.
  • Do not disassemble or reset the battery and avoid battery contact with water or other liquids so as to prevent battery leakage, overheating. fires or explosions. Do not drop, crush, scratch or puncture the battery so as to avoid subjecting the battery to excessive external pressure and the resultant short-circuit and overheating of the battery.
  • The battery or the phone manufacturer does not bear responsibility for accidents caused by the use of non-standard charging equipment
  • For more information, please visit www.hotwav.com.

Maintenance

• Proper use is important for the phone to work safely and effectively, also can extend the service life to the greatest extent.
• Please avoid dropping, knocking or violently handling of the phone. Rough treatment can damage the screen, the internal circuit board or other components.
• Do not use any strong cleaning agent or solvent cleaner to clean your phone. Wipe the phone case with a soft cotton cloth dampened with water or mild water solution.
• Clean the camera lens with clean, dry, soft and non-abrasive cloth.
• When the battery charger is not in use, please unplug it from the electrical socket. If the battery is fully charged, please disconnect the charger from your phone as it may affect the battery life in the long term. If phone calls can not be connected, check if you have accessed the right cellular network. Check if you have not set call barring for the phone number you are dialling. Check if you have not set call barring for the incoming phone number.
• If your voice can not be heard or heard well on the other end of a phone call, check if you are covering the built-in microphone. Check if the microphone is close enough to your mouth. If vou are using an earphone, check if it is properly connected.

HOTWAV Warranty Information

Thank you for using HOTWAV mobile phone. We will provide our product with comprehensive warranty services in accordance with applicable national laws and regulations.

1. Your warranty is only valid under normal use of your device. All man-made damages and any of the following conditions are out of free warranty.
   • A. The warranty period has expired.
   • B. Damage caused by human factors, including damages caused by usage under improper operating environment and failure to properly follow instructions on the user manul.
   • C. The customer disassembles, repairs or modifies the device without the company’s authorization.
   • D. Damage caused by a force majeure (such as floods, fires, earthquakes,etc).
   • E. The user is unable to provide the warranty card and valid proof of purchase or the product model and barcode do not match or are altered.
   • F. Faults, damages or defects not caused by the company.
   • G. Natural wear and tear of the product (such as casing, keypad, display screen, antenna and other accessories).
   • H. Barcode and warranty labels are damaged and unrecognizable.
   • A. A valid warranty card is a pre-requisite for claiming warranty.
   • B. The warranty card contains important information related to your product. Please preserve it for your future reference.
   • C. External damages (including wear, tear, and scratches) are not entitled to the warranty service.
   • D. Our warranty does not cover services verbally promised by dealers that violate principles set forth on the warranty card.

HOTWAV WARRANTY CARD
Customer Details

Address: FL 8, Bldg A, Jingang Science & Technology Park, Bao’an District Shenzhen, China. 518000

WWW.HOTWAV.COM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>