hama 00220803 TV Wall Bracket Instruction Manual
- July 9, 2024
- Hama
Table of Contents
hama 00220803 TV Wall Bracket
Product Information
Specifications
- Maximum load: 25 kg
- Screen diagonal: 48.0 – 117.0 cm (US: 19 – 46 inches)
- Depth: 2.5 cm
- Dimensions of the wall mounting plate: 24.5 x 10.5 cm
- Compliant with VESA standard: 50 x 50, 75 x 75, 100 x 100, 100 x 200, 200 x 100, 200 x 200
Product Usage Instructions
Package Contents
Please check the mounting kit for completeness before installing the bracket
and ensure that there are no faulty or damaged parts.
Additionally Required Tools
Never install the bracket alone. Seek assistance and help!
Safety Instructions
Make sure there are no electric, water, gas, or other lines running through
the wall at the mounting site.
Mounting on the Wall
-
Preparing the Intended Mounting Surface
Get support and help from other people for the following assembly steps. -
Attaching the Wall Bracket
Follow the instructions to attach the wall bracket securely.
Mounting on the TV Set
- Mount the VESA Arms on the Back of the TV Set
Refer to the diagram for proper placement of the VESA arms based on your TV back type.
Mounting the TV on the Wall Bracket
Get support and help from other people for this assembly step.
Adjustment & Maintenance
Note: The bracket is not adjustable.
Technical Data
- Maximum load: 25 kg
- Screen diagonal: 48.0 – 117.0 cm (US: 19 – 46 inches)
- Depth: 2.5 cm
- Dimensions of the wall mounting plate: 24.5 x 10.5 cm
- Compliant with VESA standard: 50 x 50, 75 x 75, 100 x 100, 100 x 200, 200 x 100, 200 x 200
Frequently Asked Questions (FAQ)
-
Q: Is the wall bracket adjustable?
A: No, the wall bracket is not adjustable. -
Q: What tools are additionally required for installation?
A: You will need a 10 mm wrench and assistance from others during installation.
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you
sell the device, pass on the illustrated quick start guide and the safety
instructions in printed form to the new owner.
Explanation of warning symbols and notes
-
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks. -
Note
This symbol is used to indicate additional information or important notes.
Package contents
- TV wall bracket
- VESA arms (2x)
- Mounting kit
- Safety instructions, illustrated quick start guide
Note Please check the mounting kit for completeness before installing the bracket and ensure that there are no faulty or damaged parts.
Additionally required tools
Note Never install the bracket alone. Seek assistance and help!
Safety instructions
Warning
- Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option.
- It occasionally happens that the screws for attaching the device to the bracket are too long.
- Please note that the supplied wall plugs are for use with solid, hollow and board construction materials only.
- Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
- If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialised dealer.
- Never apply force during assembly. This can damage your device or the holder.
- If in doubt, have this product installed by a qualified technician – do not attempt to install it yourself!
- Do not mount the product above locations where persons might sit or stand.
- Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
- You should repeat this check at regular intervals (at least every three months).
- Ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
- Make sure that the product is loaded symmetrically.
- Maintain the necessary safety clearance around the attached load (depending on the model).
- In the event of damage to the product, remove the attached load and stop using the product.
- Do not attach any additional objects to the product.
Application and specifications
- The bracket is used for mounting flat screens in private, non-commercial households.
- The bracket is intended only for use inside buildings.
- Use the bracket only for the intended purpose.
Preparation and assembly
Note
- Never install the bracket alone. Seek assistance and help!
- Different end devices have different connections for cabling and other devices. Before commencing the installation, check whether the necessary connections can still be reached after mounting.
- Depending on the product and mounting method, you may not need all parts of the mounting kit. It is therefore possible that unneeded screws and other small parts will be left over even after correct mounting. Keep these in a safe place together with these operating instructions for use for later reference (sale of the product, moving house, relocation of the bracket, new TV, etc.).
Warning
- Be aware that the brackets are only suitable for wall mounting.
- Before installation, check that the wall you have chosen is suitable for the weight to be mounted. Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.
Note – Fischer plugs
The Fischer plugs supplied are approved for the following building materials:
- Concrete
- Plasterboard and gypsum fibreboard
- Vertical perforated brick
- Lightweight concrete hollow block
- Hollow brick and concrete ceilings
- Perforated sand-lime brick
- Solid sand-lime brick
- Natural stone
- Aerated concrete
- Chipboard
- Solid plaster boards
- Lightweight concrete solid block
- Solid brick
Mounting on the wall
-
Preparing the intended mounting surface
Get support and help from other people for the following assembly steps.- First use the bracket as a template and re-measure if necessary to ensure that the position is correct. Use a spirit level to check the horizontal and vertical alignment of the bracket on the wall. Now mark the holes on the wall.
- To attach the wall bracket to the wall, you need a drill and a drilling attachment with a diameter of 10mm. Make sure that the drilling attachment is suitable for the intended wall. The depth of the hole should be 70 mm .
- To ensure a secure hold, vacuum out the drill holes with a vacuum nozzle so that the drill hole is free of drill dust. Now insert the plug [A2] into the drill hole so that it is flush with the hole.
-
Attaching the wall bracket
- Attach the wall bracket to the wall as shown above using the enclosed mounting material ([A2] plug, [A3] M6 washer, [A1] 6×70 mm screw and the [F1] spirit level).
Mounting on the TV set
- Note
- Given the multitude of terminal devices structures available on the market, we cannot describe all possible mounting options here.
- Please ensure that the bracket lays flat and evenly on the back of the television.
- Use the enclosed spacer to even out any unevenness on the back of the television.
- Ensure that all screws have the proper length and can be mounted until they are hand-tight.
- Mount the VESA arms on the back of the TV set
- Mount the VESA arms the back of your TV set.
- Note the combination of screw, washer and spacer listed above for your flat or curved TV.
Mounting the TV on the wall bracket
Get support and help from other people for the following assembly step.
- Hang the TV set with the mounted VESA arms on the wall bracket as shown above.
- Then attach the fastening screws on both supporting arms, as shown above.
Adjustment & maintenance
Note
Bracket is not adjustable.
- Check the strength and operational safety of the bracket and the load attached to it at regular intervals (at least quarterly).
- Clean only with water or conventional household cleaners.
Technical data
-
Maximum load: 25 kg
-
Screen diagonal: 48.0 – 117.0 cm (US: 19″ – 46″)
-
Depth: 2.5 cm
-
Dimensions of the wall mounting plate: 24.5 x 10.5 cm
-
Mount:
Compliant with VESA standard:- 50 x 50
- 75 x 75
- 100 x 100
- 100 x 200
- 200 x 100
- 200 x 200
Warranty
Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or
from failure to observe the operating instructions and/or safety notes.
Service and support
Please contact Hama Product Consulting if you have any questions about this
product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here:
www.hama.com
Warranty conditions
For this product, HAMA GmbH & Co KG grants you an extended manufacturer’s
warranty for freedom from defects, usability, workmanship and the durability
of the materials used for a period of 10 years. Excluded from the guarantee is
the compatibility of the product with future standards of further developed
hardware. Within the specified period, Hama GmbH & Co KG will remedy a
justified warranty claim at its own discretion, free of charge, either by
repair or replacement.
The warranty period begins on the date of purchase of this product and is valid throughout the EU. The warranty granted is in addition to and does not affect your statutory rights. Damage caused by improper use, normal wear and tear, exposure to chemicals or force majeure, as well as tampering or repairs by you or third parties, are excluded from the warranty. Furthermore, accessories that are not part of the basic equipment of the product (promotional parts) are excluded from the warranty.
In the event of a warranty claim, please contact us at Hama GmbH & Co KG, Dresdner Str. 9, 86653 Monheim, Germany, enclosing proof of purchase. You are also welcome to contact us at www.hama.de or by phone on +49 (0)9091/502-0.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>