Fokimdo 2IHPP1004 5000mAh Magnetic Wireless Power Bank with Stand User Manual
- July 7, 2024
- Fokimdo
Table of Contents
Fokimdo 2IHPP1004 5000mAh Magnetic Wireless Power Bank with Stand
5000 mAh POWER BANK
- USB-C INPUT & OUTPUT CHARGING PORT
- USB-A OUTPUT CHARGING PORT
- LED INDICATOR
- POWER BUTTON
- MAGNETIC CHARGING PAD
- PHONE STAND
LED INDICATOR
4-LEVEL BATTERY CHARGE INDICATOR:
- 1 of 4 White LED’s is illuminated: 0-25% battery life
- 2 of 4 White LED’s is illuminated: 25-50% battery life
- 3 of 4 White LED’s is illuminated: 50-75% battery life
- 4 of 4 White LED’s is illuminated: 75-100% battery life
CHARGING YOUR DEVICES USING CABLE
- A. Press and hold the power button for 3 seconds to turn on. The LED indicator will light up.
- B. Plug the USB-C or USB-A cable into the charging port and plug the other end into your device. LED indicator will light up and charging will begin automatically.
CHARGING YOUR DEVICES USING WIRELESS PAD
- A. Press and hold the power button for 3 seconds to turn on. The LED indicator will light up.
- B. Place your MagSafe compatible device on the magnetic wireless charging pad of the power bank. LED indicator will light up and charging will begin automatically.
RE-CHARGING THE POWER BANK
- Insert the included USB-A to USB-C cable to a power source (such as a USB wall charger). Plug the USB-C end into the USB-C input port to begin the re-charging process.
- LED will light up, indicates the power bank is charging.
- When the power bank is fully charged, 4 of LED’s will light up.
PRODUCT SPECIFICATIONS
- Battery Capacity: 5000mAh/18.5Wh
- Input: USB-C: DC 5V 2A
- Output: USB-C: DC 5V 2A;
- USB-A: DC 5V 2A
- Wireless Output: 5W
FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause hannful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part15 of the FCC Rules, These
limits are designed to provide reasonable protection against harmful
interference in a residential installation, This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accornance with the instructions, may cause harmful interference to radio
communications, However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be detennined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna,
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected,
- Consult the dealer or an experienced radio/TV technician for help,
Note : The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance, such modifications could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>