hama 00220873 TV Floor Stand Instruction Manual

hama 00220873 TV Floor Stand

Specifications

• Maximum load: 35 kg
• Screen diagonal: 81.0 – 165.0 cm (US: 32 – 65 inches)
• Swivel range: 77.6 cm
• Width: 135 cm
• Height: 52.5 cm
• Depth: 52.5 cm
• Compliant with VESA standard: 200 x 200, 300 x 200, 300 x 300, 400 x 200, 400 x 300, 400 x 400

Product Usage Instructions

Explanation of Warning Symbols and Notes
Warning: This symbol indicates safety instructions or specific hazards and risks.
Note: This symbol provides additional information or important notes.

Package Contents
Check the mounting kit for completeness before installation to ensure there are no faulty or damaged parts.

Additionally Required Tools
Never install the bracket alone; always seek assistance and help.

Safety Instructions
Follow all safety instructions provided in the manual.

Application and Specifications
Ensure that the TV stand meets the specifications mentioned for proper usage.

Preparation and Assembly

• Assembly Preparation
  Arrange components E4, E3, E5, E6, C1, C2 for assembly.

• Mounting on the TV Set
  Follow the instructions for mounting the TV set on the stand.

• Mount the VESA Arms on the Back of the TV Set
  Use components A1, A2, A3, A4, A5, A6, A7, A8, B1, B2, B3, B4, E1, E2 for mounting based on TV type (flat or curved).

• Mounting the TV on the TV Stand
  Get support and help from others for this step.

• Mounting the Cable Management
  Use component D1 or D2 for cable management.

• Adjustment & Maintenance
  Make necessary adjustments and perform regular maintenance as needed.

• Setting Options
  Utilize swivel settings for optimal viewing experience.

• Technical Data
  Detailed technical specifications provided for reference.

Frequently Asked Questions (FAQ)

1. Q: What should I do if I have leftover screws after assembling the TV floor stand?
   A: It is possible to have extra screws after correct mounting. Keep them in a safe place along with the operating instructions for future use (e.g., product sale,
   relocation).

2. Q: How can I contact Hama Product Consulting for support?
   A: You can reach Hama Product Consulting by calling the hotline at +49 9091 502-0 (German/English). Additional support information is available at www.hama.com.

Operating Instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, pass on the illustrated quick start guide and the safety instructions in printed form to the new owner.

Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

• VESA arms (2x)
• Support legs (3x)
• Connecting piece (1x)
• Mounting kit
• Safety instructions, illustrated quick start guide

Mounting kit

Note
Please check the mounting kit for completeness before installing the bracket and ensure that there are no faulty or damaged parts.

Additionally required tools

Note
Never install the bracket alone. Seek assistance and help!

Safety instructions

Warning

• Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option.
• It occasionally happens that the screws for attaching the device to the bracket are too long.
• Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
• If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialised dealer.
• Never apply force during assembly. This can damage your device or the bracket.
• If in doubt, have this product installed by a qualified technician – do not attempt to install it yourself!
• Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
• You should repeat this check at regular intervals (at least every three months).
• Ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
• Make sure that the product is loaded symmetrically.
• Maintain the necessary safety clearance around the attached load (depending on the model).
• In the event of damage to the product, remove the attached load and stop using the product.
• Do not attach any additional objects to the product.

Application and specifications

• The bracket is used for mounting flat screens in private, non-commercial households.
• The bracket is intended only for use inside buildings.
• Use the bracket only for the intended purpose.

Preparation and assembly

Note

• Never install the bracket alone. Seek assistance and help!
• Different end devices have different connections for cabling and other devices. Before commencing the installation, check whether the necessary connections can still be reached after mounting.
• Depending on the product and mounting method, you may not need all parts of the mounting kit. It is therefore possible that unneeded screws and other small parts will be left over even after correct mounting. Keep these in a safe place together with these operating instructions for use for later reference (sale of the product, moving house, relocation of the bracket, new TV, etc.).

Warning

• Only set the product up on even, non-slip surfaces with a sufficient load-bearing capacity for the product and the device attached to it.
• Make sure that children do not use the product for climbing.
• Note that the castors of the product can cause pressure marks on the installation surface. This depends on the weight loading and on the stability of the surface at the place of installation.
• Please note that subsequent height adjustment is only possible by dismantling the suspension fitting.

Assembly preparation

First screw the three support legs [E3] (2x) and [E4] to the connecting piece [E5] as shown above.

In the next step, attach the retaining rod [E6] to the connecting piece [E5]. To do this, loosen the screw as shown above using the Allen key [C1]. Now attach the retaining rod [E6] to the connecting piece [E5] and tighten the corresponding screw.

Use the Allen key [C1] to loosen the locking element as shown above. Bring it to the desired height (depending on the size of the mounted TV) at a distance of approx. 50 – 150 mm from the end of the mounting rod. Then secure the locking element using the Allen key [C1].

Mounting on the TV set
Note

• Given the multitude of terminal devices structures available on the market, we cannot describe all possible mounting options here.
• Please ensure that the bracket lays flat and evenly on the back of the television.
• Use the enclosed spacer to even out any unevenness on the back of the television.
• Ensure that all screws have the proper length and can be mounted until they are hand-tight.

Mount the VESA arms on the back of the TV set

• Please note that the VESA arm [E2] must be attached to the bottom of the TV set. Loosen the safety clip on the VESA arm as shown above using a screwdriver.
• The Vesa arm [E1] is attached to the top of the TV set.
• Mount the VESA arms the back of your TV set.
• Note the combination of screw, washer and spacer listed above for your flat or curved TV.

Mounting the TV on the TV stand
Get support and help from other people for the following assembly step.

• Hang the TV set with the mounted VESA arms on the bracket as shown above.
• Lock the safety device by closing the previously loosened safety clip and tightening it again using the screw.

Mounting the cable management

• Attach the supplied cable clips [D1] to the centre leg as shown in the illustration.
  You have the option of attaching the cable clips using the self-adhesive backing. To do this, remove the protective film, position the cable clip and press it firmly into place.
  The second way to mount the cable management is to screw it into the desired position using the enclosed screws [D2].

• Then feed the cables through.

Adjustment & maintenance

Note
Never adjust the bracket alone. Seek assistance and help!

Note – tiltable / full-motion brackets

• Ensure that no electrical cables are crushed or damaged during installation or adjustment.
• During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
• Check the strength and operational safety of the bracket and the load attached to it at regular intervals (at least quarterly).
• Clean only with water or conventional household cleaners.

Setting options

Technical data

Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here: www.hama.com

Warranty conditions

For this product, HAMA GmbH & Co KG grants you an extended manufacturer’s warranty for freedom from defects, usability, workmanship and the durability of the materials used for a period of 10 years. Excluded from the guarantee is the compatibility of the product with future standards of further developed hardware. Within the specified period, Hama GmbH & Co KG will remedy a justified warranty claim at its own discretion, free of charge, either by repair or replacement.
The warranty period begins on the date of purchase of this product and is valid throughout the EU.
The warranty granted is in addition to and does not affect your statutory rights. Damage caused by improper use, normal wear and tear, exposure to chemicals or force majeure, as well as tampering or repairs by you or third parties, are excluded from the warranty.
Furthermore, accessories that are not part of the basic equipment of the product (promotional parts) are excluded from the warranty.
In the event of a warranty claim, please contact us at Hama GmbH & Co KG, Dresdner Str. 9, 86653 Monheim, Germany, enclosing proof of purchase. You are also welcome to contact us at www.hama.de or by phone on+49 (0)9091/502-0.

References

• hama.com
• Offizieller Hama Onlineshop | Hama DE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>