Semko U207 Flush Type Wall Socket Outlet Owner’s Manual
- July 2, 2024
- Semko
Table of Contents
Semko U207 Flush Type Wall Socket Outlet
Product Information
- E-No.: Type U207
- Description/Remark: 1-way socket, earthed
Product Usage Instructions
-
Installation:
To install the 1-way socket, follow these steps: -
Turn off the power supply to the area where you will be installing the socket.
-
Remove the cover plate of the existing socket or create a new opening for installation.
-
Connect the wires to the appropriate terminals as per the wiring diagram provided.
-
Screw the socket into place and secure it tightly.
-
Operation:
Once installed, ensure the power supply is turned on and test the socket by plugging in a compatible device. The socket should provide power to the connected device without any issues. -
Maintenance:
Regularly check the socket for any signs of damage or wear. If any issues are noticed, disconnect the power supply and seek professional help for repairs or replacement.
FAQ:
-
Q: Can this socket be used outdoors?+
A: No, this socket is designed for indoor use only. -
Q: What is the voltage rating of this socket?
A: The voltage rating of this socket is [insert voltage rating here].
Specification
- Name: Flush-type wall socket outlet for fixed installation
- Technical Data: 16A 250VAC
- Frequency: 50Hz
- Colour: Black
- Main material: PC (Halogen free)
- IP-Class: IP20
- Working temperature: -25℃to +60℃
- Installation temperature: -5℃to +25℃
- Fire hazard test: 650℃/850℃ (IEC60695-2-11)
- The product complies with the standard(s): IEC60884-1
- The product conforms with the provisions of the following European directive(s): RoHS, REACH, WEEE
- Certificate(s): Semko
- Quality management system according to ISO 9001
- Environmental management system: ISO 14001
- Occupational Health and Safety Management System: ISO 45001
Technical Information
Socket outlet with thermoplastic cover. Screw (Pozidriv) terminals socket base, flush wiring. With shutter Special house (B240) for single socket outlets – used when flush mounting cable installation enters as surface mounting, covering the flush box, may be used.
- There have two screws in the cover plate.
- Fit into wall boxes, screw distance cc 60 mm.
- Maximum torque for cover screw: 0.8Nm.
- Maximum torque for terminal screws: 1.2Nm.
| E-No. | Type | Description/Remark |
|---|---|---|
| U207 | 1-way socket, earthed |
Drawing
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>