GLMNES Camping Sleeping Pad User Manual
- June 30, 2024
- GLMNES
Table of Contents
GLMNES Camping Sleeping Pad
Product Specifications
- Body Mapping Technology for maximum comfort and support
- Quick Foot Pump Inflation system
- Durable Construction with high-quality outdoor-grade materials
- Lightweight and Compact design
- Connectable Double Bed Configuration
Product Usage Instructions
Setup
- Unpack and Unroll: Remove the sleeping pad from the storage bag and unroll it on a flat surface.
- Inflate: Locate the built-in foot pump and press down on the designated spot with your foot. Continue pressing until the pad is fully inflated.
- Check for Leaks: Once inflated, inspect the valves and seams for any leaks. Use the included repair patches if needed.
- Connect for Double Bed (Optional): Connect another GLM Camping Sleeping Pad using the side buttons if desired.
Maintenance
- Cleaning: Wipe down the pad with a damp cloth and mild soap. Avoid harsh chemicals or excessive water.
- Storage: Deflate the pad completely after use and store it in the provided storage bag in a dry, ventilated area.
- Repair: If the pad develops a puncture or leak, use the included repair patches to fix it.
Warnings
- Do not overinflate the pad as this may damage the material.
- Avoid sharp objects or rough surfaces that could puncture the pad.
- Avoid using harsh chemicals or excessive water to clean the pad.
Set Up WiFi on Your Controller
- Create an account using the EGG Genius mobile app. Login to your account. Power on your controller.
- Press Add New at the top of the Home or Devices tab on the mobile app and enter the serial number for your controller (found on the bottom of the blower).
- Follow the instructions in the app to complete WiFi setup and add your controller.
Important Safety Instructions – Save these instructions for future
reference.
It is important for the safety of persons to follow these safety instructions.
Follow all instructions, as incorrect installation and use can lead to injury
or property damage.
- EGG Genius is intended for use only in dry, outdoor locations. When not in use, store the unit indoors in a dry location. If you know or suspect that the EGG Genius controller or power adapter has been submerged in water, do not use the unit.
- The 12 V DC power to the unit shall be supplied by a properly certified power adapter with SELV / LPS output. Use only the power adapter provided with the unit.
- Do not allow children to play with an EGG Genius. Keep away from children.
- EGG Genius is not to be used by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge.
- Do not place or mount an EGG Genius where it is exposed to excessive heat from the EGG.
EGG Genius Installation
Controller Installation
Top Vent is Almost Closed
IMPORTANT: Your EGG Genius controller works best for low-temperature smoking
if the top vent is adjusted to almost closed.
Probe Placement
Temperature Probe Care
- Do not place probes over a direct flame or high heat.
- EGG Genius temperature probes are designed for low and slow cooks under 400°F / 204°C in charcoal smokers and grills.
- Insert the meat probe into the thickest part of the meat avoiding any bone or gristle. Clip the pit probe to the food grate 1 to 2 inches from the meat.
- Make sure that the cables are placed over the leg of the convEGGtor and above the cooking grid in a spot where they are exposed only to indirect heat.
- Clean probes by wiping with a damp (not wet) sponge or with a disinfecting wipe.
- Probe cables should be coiled or wrapped loosely and stored free of kinks in a cool environment.
- If using the EGG Genius with a different type of grill or smoker, avoid pinching the cables between the lid and re-pit. Use an access hole, notch, or padding.
- Don’t pull on the cables; this can cause probe tips and clips to detach from the cable.
- Probes are not waterproof nor dishwasher safe. Do not submerge the probe cable in liquid.
Frequently Asked Questions (FAQ):
Q: Can I use an air pump to inflate the pad instead of the foot pump?
A: It is recommended to use the built-in foot pump for inflation to ensure
a quick and easy setup without the need for additional tools.
Q: How do I store the sleeping pad when not in use?
A: After deflating the pad, store it in the provided storage bag in a dry
and ventilated area to prevent damage and maintain its quality.
Q: Is the sleeping pad suitable for cold-weather camping?
A: The pad is designed for general outdoor activities. For cold-weather
camping, additional insulation may be required for optimal comfort.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>