MEGAKEY MK983 Typewriter Keyboard User Manual
- June 28, 2024
- MEGAKEY
Table of Contents
MEGAKEY MK983 Typewriter Keyboard
Product Information
Specifications
- Brand: XYZ
- Model: ABC123
- Power: 1200W
- Capacity: 1.5 liters
- Material: Stainless Steel
Product Usage Instructions
Initial Setup
Before first use, wash all parts in warm soapy water and dry thoroughly.
Filling the Kettle
Open the lid and fill the kettle with water up to the desired level. Do not
exceed the maximum capacity.
Power On
Place the kettle on its base and connect the power cord to an electrical
outlet. Press the power button to start heating.
Boiling Water
The kettle will automatically turn off once the water reaches boiling
point. Lift the kettle from the base carefully.
Pouring
Pour the hot water slowly and steadily from the spout into your cup or
teapot.
Cleaning and Maintenance
Regularly descale the kettle to prevent limescale buildup. Refer to the
user manual for detailed cleaning instructions.
Frequently Asked Questions (FAQ)
-
Q: How do I descale the kettle?
- A: To descale the kettle, mix equal parts of water and vinegar, fill the kettle, boil, and let it sit for an hour. Rinse thoroughly.
-
Q: Can I use the kettle without water?
- A: No, never operate the kettle without water as it may damage the heating element.
-
Q: Is it safe to leave the kettle plugged in?
- A: It is recommended to unplug the kettle when not in use for safety reasons.
MEGAKEY MK983 User’s Manual
Typewriter Keyboard
Function description
-
Volume
The volume switch is made of metal. Push the metal ring can adjust volume. -
Power switch
Switch to the ON side means to turn on the keyboard power, and to the OFF to turn off the keyboard power. -
System switch
Press 3) to switch between Windows/Android System and Mac/lOS System. When the second indicator is blue light, means It can be used under Windows/Android system; when the third indicator is blue light, means it can be used under Mac/lOS system. -
Type-c Charging Port
When the fourth indicator light turns red, it need to be charged with the Type-C charging cable. It normally takes around 6 hours to fully charge. -
Lightness
Push the metal ring to adjust the keyboard brightness of the light. -
Pull rod
The backight be by pulping the sweets can switch
Indicator description
-
Bluetooth/wired mode indicator
Wired mode: The indicator is red
Connect to the device (computer, mac, laptop) and typewriter with a type-c cable, press FN and R to switch the first indicator to turn to red. This is wired mode. Tips: In wired mode, the first indicator light I will not light up if you connect the keyboard with computer without the charging cable in our packing.
Bluetooth mode : The indicator is blue
First press FN and R to switch the first indicator to turn to flashing blue. Second press FN and Z/X/C and hold on 5 seconds. Third open the bluetooth switch and find the name of MK983 in the device click and connect it The first indicator will turn to fixed blue when bluetooth connect success. -
Window System
When the indicator light is on, it means that the keyboard is suitable for Window/Android System -
Mac/lOS System
When the indicator light is blue light, it means that the keyboard is suitable for Mac/ios System. -
Charging indicator
When the voltage is lower than 3.7V and the indicator light is red, it will be flashing red when the power less than 20%, it means the typewriter need to be charged; the blue light fixed when charging. The light off when it is full. When using individual mobile phone chargers to charge the typewriter, the indicator light will not light up. Pressing CapsLK to switch between A/a, the key light is off.
Capitals lock indicator(A/a)
Win/Android
Pressing the ‘CapsLk’key is the caps lock switch. The’CapsLk’key light up when
the caps lock unction is turn down, and the light is off when the ‘CapsLk’
caps lock function is turned off.
MAC/IOS :Pressing CapsLK to switch between A/a, the key light is off.
Win lock indicator (option key)
Press FN+WIN keys is the windows lock key switch. The WIN key light up when
Win Lock Function is open, and Win key have no function at the same time. The
light is off when lock key is closed and the Win key recovery function.
FN combination keys manual
Window/Android
FN+F1 | My Computer |
---|---|
FN+F2 | Search |
FN+F3 | Calculator |
FN+F4 | Multimedia |
FN+F5 | Last Song |
FN+F6 | Next Song |
FN+F? | Pause |
FN+FB | Stop |
FN+F9 | Mute |
FN+F10 | Volume+ |
FN+F11 | Volume- |
FN+F12 | Keyboard Lock |
FN+WIN | WIN Lock |
Mac/ios
F1 | Screen Brightness- |
---|---|
F2 | Screen Brightness+ |
F3 | Call out all programs (Mac work 10S None) |
F4 | Launchpad |
(Mac work 10S None)
F5| Keyboard Brightness-
F6| Keyboard Brightness+
F7| Last Song
F8| Play/ Pause
F9| Next Song
F10| Mute
F11| volume –
F12| volume+
PrtSc| screenshot
Pause (Onl in Mac)| Start-up Siri
How to use Pause key to start up Siri
Mac Apple- -System Preferences-Siri— Keyboard shortcuts-Enter Pause-Finish
Backlight combination keys manual
FN+ t FN+j
FN+ FN+
| Adjust the Lightness
Adjust the speed of flashing
---|---
FN+HOME| Switch the backlight mode
Press 3 seconds to restore the original design
FN+ESC
Sleep patterns In the Bluetooth mode.
it will enters sleep patterns after 5 minutes without press any key. It needs
a few seconds pause to rework.
Multi device Bluetooth mode combination keys
- Press “FN+R” to switch the indicator NO.10 to blue
- press FN and Z/X/C keys and hold for 5 seconds, the first indicate keep blue flashing at this time, then open the bluetooth switch in the device to finish pairing.
- The Bluetooth of the three devices is paired and connected to the corresponding FN+Z/FN+X/ FN+C.
- How to switching among 3 devices: Press FN+Z/X/C=Device 1 or Device 2 or Device3
WHAT’S IN THE BOX
MEGAKEY Typewriter BT MK983 1
Metal Switch Puller1
Keyboard Blue Switch2
Type-C USB Cable1
User Manual*1
Specifications
- Number of keys :83
- Number of MultimediaKeys: 12
- Materials: ABS & Metal
- Battery: 2,000mAh
- Charging Time : Around 6 hrs
- interface : Type-C
- Mode : Bluetooth & Wired
- Switch lifespan :>S0milions
- Keyboard function: AII keys anti-ghosting
- BT Name : MK983
- Dimensions: 32.516.94.3CM
- Weight: Approx.l.6421b
Press and hold for 5 seconds to bluetooth pairing during bluetooth pairing, the first indicator light flashes slowly. Turn on the bluetooth switch of the mobile phone/tablet device to connect operation. After the connection is successful, the first indicator light will keep blue.
Dear Customer : Thank you for purchasing at MEGAKEY, we hope that our
products will bring you a pleasant experience.
If you have any problems with our products, please feel free to contact us, we
will try our best to solve all problems for you.
If you satisfied with our products, please leave a positive comment as an
encouragement to us, we are very grateful if you would share your shopping
experience with our customers.
In any case, don’t forget. If you encounter any problem, big or small, we’re
at your disposal, any time.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>