STAIR VILLE IP65 Wireless Dmx Receiver User Manual
- June 28, 2024
- STAIR VILLE
Table of Contents
- STAIR VILLE IP65 Wireless Dmx Receiver
- General information
- Safety instructions
- Features
- Installation
- Starting up
- Connections and controls
- Operating
- Technical specifications
- Plug and connection assignments
- Troubleshooting
- Protecting the environment
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
STAIR VILLE IP65 Wireless Dmx Receiver
Product Information
Specifications
- Product Name: Wireless DMX Receiver IP65
- Model: Wireless DMX Receiver
- Date: 24.05.2024
- ID: 574006 (V2)
- Special Features:
- Professional W-DMX receiver
- Suitable for outdoor use
- Compatible with Wireless Solution G5
- Wireless signal transmission in the 2.4 GHz frequency range
(ISM band) without interference
Product Usage Instructions
Safety Instructions
Intended Use: This device is intended for the wireless transmission of
DMX signals in lighting systems. Use the device only as described in this user
manual. Any other use or use under other operating conditions is considered
improper and may result in personal injury or property damage..
FAQ
What is the intended use of the Wireless DMX Receiver IP65?
The device is intended for the wireless transmission of DMX signals in
lighting systems.
General information
This document contains important instructions for the safe operation of the
product. Read and follow the safety instructions and all other instructions.
Keep the document for future refer‐ence. Make sure that it is available to all
those using the product. If you sell the product to another user, be sure that
they also receive this document.
Our products and documentation are subject to a process of continuous
development. They are therefore subject to change. Please refer to the latest
version of the documentation, which is ready for download under
www.thomann.de
Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are used in this document.
| Signal word | Meaning |
|---|---|
| DANGER! | This combination of symbol and signal word indicates an |
immediate dangerous situation that will result in death or serious injury if
it is not avoided.
NOTICE!| This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and environmental damage
if it is not avoided.
Safety instructions
This device is intended for the wireless transmission of DMX signals in
lighting systems. Use the device only as described in this user manual. Any
other use or use under other operating conditions is considered to be improper
and may result in personal injury or property damage. No liability will be
assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial,
and intellectual abilities and having corresponding knowledge and experience.
Other persons may use this device only if they are supervised or instructed by
a person who is responsible for their safety.
Safety
DANGER!
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts. Children can
injure themselves when handling the device. Never allow children to play with
the packaging material and the device. Always store packaging material out of
the reach of babies and small children. Always dispose of packaging material
properly when it is not in use. Never allow children to use the device without
supervi‐sion. Keep small parts away from children and make sure that the
device does not shed any small parts (such knobs) that children could play
with.
DANGER!
Danger to life due to electric current!
Within the device there are areas where high voltages may be present. Never
remove any covers. There are no user-serviceable parts inside. Do not use the
device when covers, safety equipment or optical components are missing or
damaged.
DANGER!
Danger to life due to electric current!
A short circuit could lead to a fire hazard and risk of death. Always use
proper ready-made insulated triple-core mains cable with a safety plug. Do not
modify the mains cable or the plug. In case of isolation damage, disconnect
immediately the power supply and arrange repair. If in doubt, seek advice from
a qualified electrician.
NOTICE!
Risk of fire due to covered vents and neighboring heat sources!
If the vents of the device are covered or the device is operated in the
immediate vicinity of other heat sources, the device can overheat and burst
into flames. Never cover the device or the vents. Do not install the device in
the immediate vicinity of other heat sources. Never operate the device in the
immediate vicinity of naked flames.
NOTICE!
Damage to the device due to high voltages!
The device can be damaged if it is operated with the incorrect voltage or if
high voltage peaks occur. In the worst case, excess voltages can also cause a
risk of injury and fires. Make sure that the voltage specification on the
device matches the local power grid before plugging in the device. Only
operate the device from professionally installed mains sockets that are
protected by a residual current circuit breaker (FI). As a precaution,
disconnect the device from the power grid when storms are approaching or it
the device will not be used for a longer period.
NOTICE!
Radio interference due to electromagnetic fields!
The unit emits electromagnetic radio signals. Overlapping radio waves may
cause interference with the device and other devices. Do not use the device in
locations where the use of wireless devices is prohibited.
Features
Special features of the device:
- Professional W-DMX receiver, suitable for outdoor use, compatible with Wireless Solution G5
- Wireless signal transmission in the 2.4 GHz frequency range (ISM band) without interference
- Toll-free operation in the EU and NAFTA countries, no permit required
- Operation via button on the unit
- LED for monitoring the operating status
- Lockable input socket (Power Twist IP65) for mains power supply.
- Suitable power cable included
- Robust aluminium die-cast housing with various mounting options
- Outdoor operation is possible due to International Protection Rating IP65
- Pressure compensation element (prevents condensation inside the device)
As a suitable transmitter we recommend item no. 573998.
Information about protection class IP65
Equipment with protection class IP65 are dust-tight and completely protected against contact (first code number). They are also protected against splash water from any angle (second code digit). That is why this equipment can also be used outdoors. Event technology equipment is generally only designed for temporary use however (event lighting) and not for permanent use outdoors.
The specified protection class does not make a statement about the weather
resistance of the equipment (resistance to changing ambient conditions as well
as against the effects of sun‐light and UV rays).
The seals and screw connections of the equipment must be checked regularly to
ensure a fault-free operation. In cases of doubt, consult a specialist
workshop in due time.
Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
NOTICE!
- Data transfer errors due to improper wiring!
- If the DMX connections are wired incorrectly, this can cause errors during the data transfer.
- Do not connect the DMX input and output to audio devices, e.g. mixers or amplifiers.
- Use special DMX cables for the wiring instead of normal microphone cables.
Notes on radio transmission
-
This equipment uses a frequency range that is free of charge and registration within the European Union.
For more information, please visit: http://www.thomann.de. -
Make sure that no metal objects are located between the transmitter and receiver.
-
Avoid interference by other radio and in-ear systems.
Starting up
Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
Point-to-point connection
Connect a compatible transmitter to the DMX output of your DMX controller and
a receiver to the DMX input of the first DMX device in the DMX chain that is
to be controlled. In this point-to-point configuration the DMX signal from one
transmitter is sent to one receiver.
Connect a compatible transmitter to the DMX output of your DMX controller and a receiver to the DMX input of each first DMX device in the DMX chains that are to be controlled. In this point-to-multipoint configuration the DMX signal from one transmitter is sent to several receivers. Transmitter and all receivers must be set to the same frequency range.
DMX chain
Connect the output of the first DMX device to the input of the second one and
so on, to form a series connection. Make sure that the output of the last DMX
device in the chain is terminated by a resistor (110 Ω, ¼ W).
Connections and controls
| 1 | Antenna |
|---|---|
| 2 | Pressure equalisation element |
| 3 | [FUNCTION] |
LED shows the current operating status.
n Off: The receiver is not connected to a transmitter.
n On: The receiver is connected to a transmitter, the transmission of the DMX data is running.
n Flashing: The receiver is connected to a transmitter, but no DMX signal is being transmitted.
4| [230V~50Hz] | Lockable input socket (Power Twist IP65) for mains power
connection
5| [DMX Out] | DMX output, designed as XLR panel socket, 3-pin
Operating
Connecting to transmitter
- Connect the receiver to the mains and make sure that also the transmitter is switched on.
- If the ring-shaped [FUNCTION] LED on the receiver is not on, press [FUNCTION] on the transmitter. The LEDs on the transmitter and receiver flash quickly for a few seconds.
If the LEDs are permanently lit, the connection is established.
Disconnecting from the transmitter
Press [FUNCTION] on the receiver for about six seconds.
The [FUNCTION] LED goes out, the connection is broken.
Technical specifications
| Input connections | Power supply | Power Twist TR1 |
|---|---|---|
| Output connections | DMX output | XLR panel socket, 3-pin |
| Frequency | 2.4 GHz | |
| Sensitivity | –96 dBm | |
| Antenna gain | 5 dBi | |
| W-DMX | Frequency range | 2.403 GHz…2.479 GHz |
| Max. transmission power | 20 dBm | |
| Range (outdoors) | approx. 500 m | |
| Power consumption | 6 W | |
| Supply voltage | 230 V 50 Hz | |
| International Protection Rating | IP65 | |
| Dimensions (W × H × D, without antenna) | 135 mm × 90 mm × 80 mm | |
| Weight | 1.0 kg | |
| Ambient conditions | Temperature range | 0 °C…40 °C |
| Relative humidity | 20%…80% (non-condensing) |
Plug and connection assignments
Introduction
This chapter will help you select the right cables and plugs to connect your
valuable equipment so that a perfect light experience is guaranteed.
Please take our tips, because especially in ‘Sound & Light’ caution is
indicated: Even if a plug fits into a socket, the result of an incorrect
connection may be a destroyed DMX controller, a short circuit or ‘just’ a not
working light show!
DMX connections
The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX
input. Please refer to the drawing and table below for the pin assignment of a
suitable XLR plug.
| Pin | Configuration |
|---|---|
| 1 | Ground, shielding |
| 2 | Signal inverted (DMX–, ‘cold signal’) |
| 3 | Signal (DMX+, ‘hot signal’) |
Troubleshooting
NOTICE!
- Data transfer errors due to improper wiring!
- If the DMX connections are wired incorrectly, this can cause errors during the data transfer.
- Do not connect the DMX input and output to audio devices, e.g. mixers or amplifiers.
- Use special DMX cables for the wiring instead of normal microphone cables.
In the following, we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting:
| Symptom | Remedy |
|---|---|
| No response to the DMX con‐ troller | 1. Check the power supply of the |
transmitter and receiver.
2. Make sure that transmitter and receiver are operating in the same
frequency range.
3. Check the DMX connections and cables for proper connection.
4. Check the address settings and the DMX polarity.
5. Try using another DMX controller.
6. Check whether the DMX cables run near or parallel to high-voltage cables
that may cause damage or interfer‐ ence to a DMX interface circuit.
Transmission is interrupted| 1. Try to improve the audio transmission by
moving the transmitter closer to the receiver.
2. Make sure that no metal objects near the transmitter or receiver are
obstructing the transmission.
3. Modify the orientation of the antennas.
Symptom| Remedy
---|---
| 4. If you are using more than one wireless system at the same time, check
the used frequencies and channels
5. Interference can also be caused by other radio or in- ear systems.
If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de
Protecting the environment
Disposal of the packing material
Environmentally friendly materials have been chosen for the packaging.
These materials can be sent for normal recycling. Ensure that plastic bags,
packaging, etc. are disposed of in the proper manner.
Do not dispose of these materials with your normal household waste, but make
sure that they are collected for recycling. Please follow the instructions and
markings on the packaging.
Observe the disposal note regarding documentation in France.
Disposal of your old device
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) as amended.
Do not dispose of your old device with your normal household waste; instead,
deliver it for controlled disposal by an approved waste disposal firm or
through your local waste facility. If in doubt, consult your local waste
management facility. You can also return the device to a retailer if they
offer to take the device back for free or if they are legally obliged to do
so. When disposing of the device, comply with the rules and regulations that
apply in your country. You can also return your old device to Thomann GmbH at
no charge. Check the current conditions on
www.thomann.de.
Proper disposal protects the environment as well as the health of your fellow
human beings. This is because the proper handling of old devices negates the
potential negative effects of hazardous substances, and because it conserves
resources by recycling them.
Also note that waste avoidance is a valuable contribution to environmental
protection. Repairing a device or passing it on to another user is an
ecologically valuable alternative to disposal.
If your old device contains personal data, delete those data before disposing
of it.