Tuodi MC330 White Noise Machine User Manual

Tuodi MC330 White Noise Machine

Please read this manual carefully before using the product and keep it in a safe place. Thank you for purchasing and using this product! To ensure a better operating experience for you, please refer to your product manual.

Product Features

1. Music playback function: Built-in 39 types of sleep-soothing music, including white noise, ocean waves, birdsong, running water, thunder, wind, and more. Covers most people’s sound preferences.
2. Bluetooth function: both can play the built-in sound source of the machine, the user can also connect Bluetooth to play songs.
3. Time function: lightly press the ” T” key to display the time.
4. Timing function: Timing can be selected: 30, 60, 90 minutes.
5. Durable battery life: built-in 1500mAh lithium battery, standard Type-C charging port.
6. Memory function: After power off, it can save the previous setting function, and after power on, it can restore the brightness of the night light before the last power off. The night light brightness, volume setting, and white noise playing automatically before the last power off

Products

Instructions for use

Battery
Use the Type-C charger to charge the speaker, when charging, the speaker indicator light is red. When charging is complete, the speaker’s indicator light will turn green.

Connect Bluetooth to play music

1. Long press the “Music/Bluetooth button” for 3 seconds to open Bluetooth, long press again for 3 seconds to enter pairing mode, after pairing successfully you can use Bluetooth to play music.
2. Open the Bluetooth of your cell phone, search and connect the Bluetooth device that starts with ” MC330-***”. speaker. Bluetooth Music Priority, when local music is playing, the phone plays music and the speaker automatically switches to Bluetooth music mode

Setting the clock

1. Press and hold down the “M” key, the time display “hour” flashes, press the “S ” key to set the time. Press the “M ” key again, the time display “minute” blinks, press the “S” key to set the time and then press the ” M” key. After setting the time, press the “M” key. *Connect the bluetooth speaker to synchronize the time of cel phone automatically.

Timer button setting instructions
Turn on your device or light in continuous play, until the timer isturned on. Press Timer button to set timer for 30/60/90min. corresponding indicator for different timers setting will light up. Note: If no indicator lights up, device is in continuous working. Default mode is continuous working.

Technical Information

• Model No: MC330
• Operating Temperature: -10°C-40°C
• Charging Voltage: 5V
• Weight: 242g$5g
• Battery Capacity: 1500mAh
• Size: 14284161 mm
• Working Distance: 10m (open environment without obstacles)

Packing List

Function Introduction

Attention

1. Please place the device at least about 1 meter away from you or your baby so that it can This allows the sound to fill your space properly and is good for your hearing.
2. This product is not waterproof, avoid placing the device in rainy or wet places, keep it dry. Keep it dry.
3. Do not place any objects on this product.
4. Do not press the button too hard
5. Do not disassemble, puncture or crush the product.

Troubleshooting

If an abnormality is found during use, please refer to the following table to solve the problem.

The machine does not work / does not respond even when the button is pressed.

• Reason : The power is not on because you didn’t long press the power button.
• Counter measure : Don’t short press, long press for about 3 seconds to turn the power on or off

The machine is powered on but does not make a sound

• Cause : Volume set to minimum
• Counter measure : Press the Volume Up button before the volume is appropriate.

Charging indicator does not light up green even when charging for a long period of time

• Cause : Charging with a USB cable / incompatible with the charger you are using
• Counter measure : Please use another 5V / 1A USB power adapter or your computer’s own USB port, etc. for charging.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation isb subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition, compliance with exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>