SUNCO LIGHTING LS-RWPO2B-120F LED Wall Pack Light Fixture

Specifications:

• Model No: LS-RWPO2B-120F 1JYT1SA2-BR50
• PFC: 0.9
• Wattage: Tunable 120W
• Voltage/Current Input:
  • 120V – 1.0A
  • 277V – 0.43A
• Light Efficiency: 135LM/W
• Kelvin Options: 5000K

Product Usage Instructions

Installation Instructions

Warning:

1. Do not use an electric generator to test the LED lamp.
2. The luminaire must be installed in accordance with local electrical codes and requirements.
3. Avoid installing the luminaire in the rain to prevent lightning stroke and damage.

Installation Notice:

1. The luminaire must be installed by a qualified electrician to prevent electric shock and fire accidents.
2. Wear gloves during installation to avoid injury.
3. If there is smoke or fire during installation, turn off the power immediately and inform professionals for inspection.
4. This luminaire is suitable for outdoor use.

Installation I:

1. Cut holes on the wall according to the locating plate.
2. Fix rubber plugs into the holes.
3. Align the mounting bracket with the hole and tighten the screws.
4. Make wiring connections and go through isolation treatment.
5. Fix the luminaire on the bracket and tighten the screws on the bottom.
6. After installation, ensure all screws are tightened.

Installation II:

1. Cut holes on the wall according to the locating plate.
2. Fix rubber plugs into the holes.
3. Align the mounting bracket with the hole and tighten the screws.
4. Fix the luminaire on the bracket, make wiring connections from the side, and go through isolation treatment.
5. Tighten the pipe on the luminaire, and after installation, ensure all screws are tightened.

FAQ

• Q: What should I do if there is smoke or fire during installation?
  • A: Turn off the power immediately and inform professionals for inspection and necessary action.
• Q: Can I install the luminaire in rainy conditions?
  • A: No, avoid installing the luminaire in the rain to prevent lightning stroke and damage.

FEATURES

• Rotatable optics design, can either up or downlight
• Great architecture design, aluminium alloy housing
• Optics swivel 350 degrees in each direction
• IP65 waterproof
• 50,000 hours lifetime

SUITABLE APPLICATIONS

• Warehouses
• Stadiums
• Factories
• Parking Lots
• Shopping Malls
• Supermarkets
• Logistic Centers
• Auto Dealership

CONSTRUCTION:

• Aluminum alloy housing with bronze powder-coated finish
• ELECTRICAL:
  • Avala 1135120-27V input

OPTICAL SYSTEM:

• High brightness luminleds 2835 chips
• High Transmission PC optics
• 60° beam angle
• INSTALLATION & MOUNTING:
  • Wall mounting with backside plate for easy install

WARRANTY:

5-year limited warranty. Actual performance may differ as a result of end-user environment and application.

CONTROLS & DIMMING:

• 0-10V dimmable

PERFORMANCE:

Electric Characteristic

Dimension

Distribution Diagram

LDS-WPB-120W-120V-50K-V2

Note

1. The installation and maintenance must be completed by electricians or professionals.
2. Please cut off the power before installation and maintenance.
3. The thermally insulating material is not allowed to cover the fixture.
4. Please keep away from the corrosive substance.

Installation Instruction

Warning:

1. Can not use the electric generator to test the LED lamp.
2. This luminaire must be installed in accordance with your local electrical codes and requirements.
3. Do not install the luminaire in the rain, to avoid lightning stroke and damage to the luminaire.

Installation Notice:

1. This luminaire must be installed by a qualified electrician to avoid electric shock and fire accidents;
2. Wear gloves before installation in order to avoid injury;
3. Turn off the power immediately when there is smoke and fire during installation; inform professionals to overhaul;
4. This luminaire is suited for outdoor use.

The installation of the product can be used when it is marked with “√ “.

Installation I:

Wiring from the bottom of the luminaire

1. Cut holes on the wall according to the locating plate. ( Figure 1-1 )
2. Fix rubber plugs into holes. ( Figure 1-2 )
3. Align mounting bracket with hole; tightens crews. ( Figure 1-3 )
4. Make a wiring connection and go through isolation treatment. ( F igure 1-4)

1. *  **Installation I:**

Wiring from the bottom of the luminaire

2. Fix the luminaire on the bracket and tighten the screws on the bottom. ( Figure 1-5 )
3. After installation, tighten the screws. ( Figure 1-6 )

Installation II:

Wiring from the bottom of the luminaire

1. Cut holes on the wall according to the locating plate. (Figure 2-1)
2. Fix rubber plugs into holes. (Figure 2-2)
3. Align mounting bracket with hole; tighten screws. (Figure 2-3)
4. Fix the luminaire on the bracket; make a wiring connection from side and go through isolation treatment. (Figure 2-4)
   • Installation II:

Wiring from the bottom of the luminaire

5. Tighten the pipe on the luminaire; after installation, tighten the screws. ( Figure 2-5 )

Installation II:

Bracket installation

1. Cut holes on the wall according to the locating plate. (Figure 3-1)

2. Fix rubber plugs into holes. (Figure 3-2)

3. Align mounting bracket with hole; tighten screws. (Figure 3-3)

4. Pass wires through the rubber ring and junction box, align with holes and lock the junction box. (Figure 3-4)

   • Installation II:
     Bracket installation

5. Make a wiring connection and go through isolation treatment. (Figure 3-5)

6. Push the wires into the junction box; after installation, tighten the screws. (Figure 3-6)

Documents / Resources

| SUNCO LIGHTING LS-RWPO2B-120F LED Wall Pack Light Fixture [pdf] Instruction Manual
LS-RWPO2B-120F, LS-RWPO2B-120F LED Wall Pack Light Fixture, LED Wall Pack Light Fixture, Wall Pack Light Fixture, Pack Light Fixture, Light Fixture, Fixture
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>