hama 00053310 600 Mbps Wlan USB Stick Instruction Manual
- June 27, 2024
- Hama
Table of Contents
hama 00053310 600 Mbps Wlan USB Stick
Specifications
- Product Name: WLAN USB Stick 600 Mbps
- Model Number: 00 053310
- Type: Nano
- Supported Encryption Modes: WEP, WPA, WPA2, TKIP, AES
- Operating System Compatibility: Windows OS and Mac OS
- WLAN Standards: IEEE 802.11 b/g/n (2.4 GHz up to 150 Mbps), IEEE 802.11 ac (5GHz up to 433 Mbps)
- Power Consumption: 5V 100mA
Product Usage Instructions
- Check the package contents to ensure all necessary components are included.
- Ensure to use a USB 2.0 port for optimal performance and compatibility.
- Insert the WLAN USB stick into a USB port on your computer.
- Follow the program installation instructions for proper setup.
- If replacing an existing WLAN USB stick, uninstall the old one before installing the new device.
- After successful installation, you can configure the WLAN USB stick to connect to a wireless network in either infrastructure mode or ad-hoc mode.
- In infrastructure mode, connect your computer to an access point (eg, WLAN router) for internet or network access.
- Use Wi-Fi Protected Setup (WPS) to establish connections securely. Configure networks in your operating system if no networks are available.
FAQs
- Q: What do the warning symbols and notes in the manual mean?
- A: Warning symbols indicate safety instructions or hazards, while notes provide additional information or important notes.
- Q: What encryption types does the WLAN USB stick support?
- A: The WLAN USB stick supports encryption processes like WEP, WPA, WPA2, TKIP, and AES to secure your wireless network.
Operating instruction
- Thank you for choosing a Hama product.
- Take your time and read the following instructions and information completely.
- Please keep these instructions in a safe place for future reference.
- If you sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Warning
- This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
- This symbol is used to indicate additional information or important notes.
Package Contents
- 1 x WLAN USB stick
- 1 set of operating instructions
Safety Notes
- The product is intended for private, non-commercial use only.
- Protect the product from dirt, moisture, and overheating, and only use it in a dry environment.
- Do not open the device or continue to operate it if it becomes damaged.
- Keep this product, as all electrical products, out of the reach of children!
- Use the product for its intended purpose only.
- Since the battery is integrated and cannot be removed, you will need to dispose of the product as a whole. Do this in compliance with the legal requirements.
- Do not modify the product in any way. Doing so voids the warranty.
- Do not use the product near heaters or other heat sources or in direct sunlight.
- Use the item only in moderate climatic conditions.
- Do not operate the product outside the power limits given in the specifications.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not use the product in moist environments and avoid splashes.
- Do not drop the product and do not expose it to any major shocks.
System requirements
- One available USB port on the computer.
Note
A USB 2.0 port is recommended.
- A computer with one of the following operating systems installed: Windows 10/8.1/8 / XP / Vista / 7 und MacOS (10.6 ~ 10.13)
- Access to a wireless network (WLAN), e.g. via routers, (mobile) hotspots, etc.
Startup and operation
- To install the WLAN USB stick on your computer, you must perform the following steps in the given order:
Installation under Windows (XP/Vista/7/8.x/10)
With Windows OS, the drivers must be installed manually. The relevant driver
is already contained on the WLAN USB stick.
- When you insert the WLAN USB stick for the first time, a CD drive appears in ‘This PC’ on your PC.
- Open the ‘Windows’ folder.
- Double-click ‘WifiAutoInstallSetup.exe’ to start the driver installation. Follow the instructions of the installation program.
Installation under macOS (10.6 ~ 10.13)
With macOS, the drivers must be installed manually. The relevant driver is
already contained on the WLAN USB stick.
- When you insert the WLAN USB stick for the first time, a CD drive appears in ‘This PC’ on your PC.
- Open the ‘macOS’ folder.
Double-click ‘WifiAutoInstallSetup.pkg’ to start the driver installation. Follow the instructions of the installation program.
Note
Before you begin with the installation, please observe the following points:
- Use a USB 2.0 port for optimum device performance.
- Save your data in all applications that are open and close all application programs that are running.
- If another version of the driver is already installed on the computer, uninstall it before installing the new one.
Warning
- Do not use force to insert the WLAN USB stick into the socket. Doing so could damage your computer’s USB port.
- Check whether the USB connector must be inserted the other way around.
Warning
- Possible data loss when writing to a network drive.
- If the WLAN USB stick is removed during a data transfer, data may be lost when writing data to the network drive.
- Close all open programs to ensure that all application data has been saved.
- Shut down the computer properly before unplugging the WLAN USB stick.
Supported encryption types
The WLAN USB stick supports the following encryption processes to prevent
unauthorized access to your wireless network:
- WPA
- WPA2
- WEP (64/ 128 bit)
Note
- WPA and WPA2 (Wi-Fi Protected Access) are the current standards for encryption of wireless networks and the data transmitted. Only users who know the set key can access the wireless network.
- WEP (Wired Equivalent Privacy) is an older encryption process and is required whenever a user in the wireless network does not support the newer WPA/WPA2 encryption process.
- We recommend using the WPA or WPA2 encryption process whenever possible.
Network configuration (after successful installation)
- Once you have successfully installed the WLAN USB stick on your computer and inserted it, you can establish a connection between a wireless network and your computer.
- The WLAN USB stick allows both infrastructure mode and ad-hoc mode.
Infrastructure mode
- Wireless connection of one or more computers and other network users to an access point is called infrastructure mode.
- Access points such as WLAN routers allow functions such as accessing the Internet or a wired network.
Network configuration via WPS
Note – WPS
- If your access point supports WPS (Wi-Fi Protected Setup), this standard can simplify the configuration of your wireless network.
- Please refer to the instructions in the operating manual of your terminal device.
- WPS can only be used in combination with the WPA/ WPA2 encryption processes (WEP is not supported).
- Press the WPS button at the access point (the button may have a different name) to activate the WPS function at the access point and on the computer with the inserted WLAN USB stick.
- The available network is automatically selected in this process and the security data is transferred.
- You may be prompted to enter a security/network key, password, etc.
- If necessary, follow the instructions for your operating system.
Manual network configuration
- Select an available network.
- You may be prompted to enter a security/network key, password, etc.
- After you have entered it correctly, the connection is established.
If no networks have been set up/are available, configure the appropriate network using the settings and configurations in the operating system you use.
Note – Configuration
- Note the information in the operating instructions for your terminal device and operating system.
- If necessary, follow the instructions for your operating system.
Care and Maintenance
- Only clean this product with a slightly damp, lint-free cloth, and do not use aggressive cleaning agents.
- Make sure that water does not get into the product.
Warranty Disclaimer
- Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.
Technical Data
Declaration of Conformity
- Hereby, Hama GmbH & Co KG declares that the radio equipment type [00053310] complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address:
- https://uk.hama.com 00053310 Downloads
Restrictions or Requirements in
Belgium, Bulgaria, Czech Republic, Denmark, Germany, Estonia, Ireland, Greece,
Spain, France, Croatia, Italy, Cyprus, Latvia, Lithuania, Luxembourg, Hungary,
Malta, the Netherlands, Austria, Poland, Portugal, Romania, Slovenia,
Slovakia, Finland, Sweden, United Kingdom
Note
If channels 36–64 (frequency 5.150–5.350 GHz) are used in a 5-GHz WLAN, the
product may only be used in closed rooms
Summary of Maximum SAR Value
Further information (features, languages, and so on) is available on/ Weitere Informationen (Features, Sprachen, etc.) finden Sie hier 00053310: www.hama.com/53310#downloads.
CONTACT
Hama GmbH & Co KG
- 86652 Monheim/Germany
Service & Support
- www.hama.com
- +49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>