PP RICH BTK10 Small Bowl Of Starry Sky Lamp User Guide
- June 25, 2024
- PP RICH
Table of Contents
PP RICH BTK10 Small Bowl Of Starry Sky Lamp
Specifications
- Model: BTK10
- Compliance: FCC radiation exposure limits
- Minimum distance : 0cm between radiator and body
Product Usage Instructions
Unboxing Check
Ensure all items are present according to the package list.
Warnings
Follow all warnings provided in the manual for safe usage.
How to Use
Refer to the statement for detailed instructions on using the product.
FAQ
- Q: What should I do if the remote control is not working?
- A : Check the batteries in the remote control and ensure they are properly inserted. If the issue persists, contact customer support for further assistance.
- Q : How do I reset the device?
- A : Locate the reset button on the device and press it for 10 seconds to reset the device to factory settings.
Unboxing Check
Thank you for purchasing our products, Please read the instruction manual carefully before use. The instruction manual contains necessary safety advice and user instructions, follow the instruction manual to operate in order to avoid damaging the product for misuse. Check whether the product is damaged or not when you receive the product.
Package list
- Music starry projector × 1
- Remote controller × 1
- USB cable × 1
- User manual × 1
Notice
- Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
- This product is suitable for indoor use.
- The product is projected by LED and laser combinations, please do not use laser shone directly in eyes and keep away from children.
Warnings:
The power requirement of this product is USB DC 5V. Once the range is
exceeded, please use the regulator device, otherwise, it’ll affect its service
life.
How to use
- Indoor use, projecting in the sky direction.
- How to use the light projector, as shown below.
- Connect the Bluetooth “BTK10” of the smartphone to play music.
- Use the correct method of the remote control to make sure the remote control is pointing at the infrared sensor.
Statement
This product has been comprehensive and rigorously tested at the factory, the
user should strictly follow the warning and instructions. Improper use
resulting in product damage is not covered by the Company’s warranty.
Remote control function description
Instruction:
When the projector light connects power; the LED blue light keeps on and in
non-moved status; laser light enters gradation mode, it can default
automatically switch off in 4 hours.
Host button function description
- Automatic recognition of USB data. Note that this projector can auto-recognize and play music while inserting USB memory. USB should contain some songs
- Ocean wave 3 levels brightness adjustment
- DC Input: 5V
- Short press play the previous song; Long press reduces the volume
- Short press play next song; Long press increase volume
- Short press play controls the music play/pause
- Short press achieves Bluetooth/USB mode switch when connecting Bluetooth and USB at the same time
- Power ON/OFF
Notice:
This product comes with 4 hours automatic shutdown function that works for 4
hours and shuts down automatically.
Specification
- Maximum LED Power: 5W
- Green Laser: <1MW
- Power inp ut: USB DC5V
- Operating Temperature: 14°F~104°F(-10°C~40°C)
- Projection Coverage: 161~538ft （15~50㎡）
- Product Dimensions : 167167135mm
Remote control function description
- Control product on/off
- Bluetooth mode
- Control device volume up
- Select playing the previous song
- Free-breathing mode: Connect Bluetooth or USB storage to play music, press the “Micro” icons, and waves and stars will change rapidly with the sound of music
- Select playing next song
- Control device volume down
- Press“FADE 1” ocean wave move circularly in single colour mode and the laser light changes to gradation mode(the same feature as Power On)
- Control ocean wave moving speed up(Pause–Slow–Medium–Fast)
- Control LED ocean wave light brightness(In order of 100%-70%-40%-10% -40%-70%-100%)
- Press “FADE 1” to cycle the waves in dual colour mode and laser Change to gradient mode (same function as power on)
- Control ocean wave moving speed down(Fast–Medium–Slow–Pause)
- Press“LASER ilght” to achieve either Laser ilght stay on or enter into gradation mode
- Timer OFF: LED ilght and laser ilght flash 3 times as prompting to set the timer off successfully.
- 1H Timer: Shut off automatically after the device works for 1 hour. LED light and laser light flash once time as prompting to set the 1H timer successfully.
- 2H Timer: Shut off automatically after the device works for 2 hour. LED light and laser light flash once time as prompting for set the 2H timer successfully
FCC STATEMENT
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device,pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver. -
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator and your body.