Shenzhen Kerun E-commerce Co Ltd 2A5FW-W1 Digital Camera User Manual

Shenzhen Kerun E-commerce Co Ltd 2A5FW-W1 Digital Camera User Manual

WARNING

To reduce the risk of fire or electric shock:

Do not expose the unit to rain or moisture.
Do not place objects filled with liquids, such as vases, on the apparatus.
Do not expose the batteries to excessive heat, such as sunshine, fire or the like.
Do not ingest batteries, chemical burn hazard.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
CAUTION

If the battery is mishandled, the battery pack can burst, causing a fire or even
chemical burns. Observe the following cautions
Do not disassemble.
Do not crush and do not expose the battery pack to any shock or force such as
hammering,dropped or stepping on it.
Do not short circuit and do not allow metal objects to come into contact with the
battery terminals.
Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or
in a car parked in the sun.
Do not incinerate or dispose of in fire.
Do not handle damaged or leaking lithium ion batteries.
Keep the battery pack out of the reach of small children.
Keep the battery pack dry.
Replace the battery with the specified type only. Otherwise, bursting, fire or injury may result.
Dispose of used batteries according to the instructions.
Use a nearby wall outlet(wall socket) when using the AC Adapter/Battery charger.
If any malfunction occurs, disconnect the plug from the wall outlet immediately to disconnect from the power source. If you use the product with a charge lamp, note that the product is not disconnected from the power source even if the lamp turns off.
Do not use the AC adapter/Battery charger placing in a narrow space, such as between a wall and furniture.
If static electricity or electromagnetism cause data transfer to discontinue midway (fair), restart the application or disconnect and reconnect the communication cable  To reduce the risk of fire or electric shock:
Do not expose the unit to rain or moisture.
Do not place objects filled with liquids, such as vases, on the apparatus.
Do not expose the batteries to excessive heat, such as sunshine, fire or the like.
Do not ingest batteries, chemical burn hazard.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. (USB, etc.) again.

System requirement

Users can transfer videos and photos to computers with the following configurations:
Intel Pentium 2.0GHz or higher/ Microsoft Windows XP or higher operating system 2GB RAM 40GB or more available disk memory/ Standard USB interface / 1GB GPU or higher 1920×1080 pixels or higher resolution.

Parts and controls

Rear view

Charging/working indicator light
Digital zoom in
Digital zoom out
Delete button
Playback button
Up button/shortcut button for fill light
Right button
OK button
Front view

Down button
Left button
DISP button
Menu button
Display screen
Fill light
Lens

Top side view

POWER button
Photo button
Bottom side view

Mode Dial
Tripod hole

Left side view

Right side view

Memory card slot
Type-C USB interface
Battery compartment
Buttons/ Indicators Functions
POWER Power on / off
PHOTO Take photo
Pause of recording
Mode dial Switch shooting mode
T digital zoom in
W Digital zoom out
Indicator light Working / Charging indicator light
Playback button Open/Exit Media Playback
Up Upward
Turn on/off the fill light
Right Rightward
Down Downward
Delete photo/video
Left Leftward
OK Confirm
DISP Turn on/off the display
MENU Open / Close menu settings
USB USB cable charging
Connect the computer with USB cable
Charging the battery
Power off your camera, open the battery cover, and insert the battery in the direction shown in the following picture, then close the battery cover.

You can use supplied USB cable to charge your camera via an adapter (5V/1A~5V/2A) .

The charging indicator will be turned on in red when the battery is in charging.
The charging indicator will be turned off automatically when the battery is fully charged.
Normally it takes around 2 hours to full charging of the battery. When the battery is fully charged, the battery life is around 60 minutes for recording

Power on/off the camera

Press the power button, the camera will turn on automatically.

To turn off the camera, press and hold the power button for 3 seconds.
Note: When you turn on the camera for the first time, you need to press and hold the power button to turn it on.
When there is no battery in the battery compartment, you need to press and hold the power button to turn on the camera after you put the battery in.

Set the camera

You can make custom settings of the camera.
After the camera is turned on, press the menu button to open the menu settings.

Menu Settings

Sub-menu for current mode
System settings
Sub-menu Menu content
Image Rotation Turn On/Turn Off
Icon Display Turn On/Turn Off
Video Focus Mode Auto focus/Manual focus/Fixed focus
Wi-Fi Turn On/Turn Off
Light Source Frequency Auto/50Hz/60Hz
LED Indicator Turn On/Turn Off
Auto Screen Saver Turn Off/30s/1Minute/2Minute
Auto Power Off Turn Off/3Minute /5Minute /10Minute
Display Brightness High/Middle/Low
Button Prompt High/Middle/Low/Turn Off
Startup Music Turn On/Turn Off
Language Simplified Chinese/Traditional Chinese/English/ Japanese/Korean/ Russian/German/French/Italian/ Spanish/Portuguese/Thai
Time Format YYYY/MM/DD MM/DD/YYYY DD/MM/YYYY
Time Set hour minute second
Date Set year month  day
Format (Micro SD Card)Format/Cancel
Device Info Product model and version number
Factory Reset Confirm/Cancel
Insert and format the memory card

A class 10 or higher speed memory card is recommended to normal use.

Insert the memory card into the memory card slot until you hear a “click”.
Insert the memory card in the direction shown in the diagram, paying attention to the edges and corners.

To remove the memory card: Push the memory card in and it will automatically pop out.
Format the memory card

It is recommended to format the memory card before the first use. To format the memory card, press the menu button to open the menu system.Then press the left or right button to switch to system settings. Press Up or Down to find “Format” and press OK to get the sub-menu. Select “Format” to format the memory card.

Note:If the memory card is not native format, the screen will pop-up a prompt: “Unsupported file system,do you want to format？” please format the memory card as above operation.
Formatting the memory card will erase all the data stored on it and the data will be irrecoverable. Save your important data on PC before formatting

Using the camera

After the camera is turned on, it defaults to video shooting mode.

Rotate the mode dial to select the desired mode

icon Mode illustrate
Photo Take a single photo normally
Auto Automatically cycle take photos after a specifiednumber of seconds
Timed Take a single photo after a specified number ofseconds
Burst Take a specified number of photos in succession
Video Normal recording mode
Slowly Slow motion shooting
Lapse Compress time to record video
Loop Recording infinite loop
Video+Photo During the recording video, you can captureaccording to the set capture interval single photo

Note: The camera supports setting the corresponding mode menu in different modes. After selecting the desired mode, press the menu button to open the menu and select the desired setting if desired.
Press the photo button to take a photo, and the photo will be automatically saved to  the memory card.
In video recording mode, press the photo button to start recording, and then press to end recording. You can also press the power button to pause/continue recording  while recording.

Photo button (video start/end button)
Press to start recording, then press to end recording
Indicator light
The working indicator light flashes when recording
Digital zoom button
T button digital zoom zoom in/W button digital zoom zoom out

Focus function
This function includes 3 focus modes: automatic focus/manual focus mode/fixed focus. Press menu button Open the menu, then press the left/right button to switch to system settings, press the up/down button to find “Video Focus Mode”, press OK button to enter focus mode. Select the mode you need

Fully automatic focus
In this mode, you only need to keep the camera steady when taking pictures or videos, and the camera will automatically focus. Once done, press the capture button.
Manual focus
In this mode, when taking a photo or recording a video, half-press the photo button and the focus frame will appear on the display until the camera focuses clearly. Then press the photo button all the way down to take the clearest photo or start recording with the clearest image.
Fixed focus
In this mode, you need to press the shooting button halfway to focus when taking pictures or videos, and the screen will clearly show the image of the object being shot, and then press the shooting button to the end. If you release the capture button to take pictures or record videos, the pictures and videos will not be clear.
Fill light
In video mode, pressing the up button can quickly turn on or off the fill light. In photo mode, the fill light has three flash modes and pressing the up button can quickly switch between the three modes

No flash
Auto flash
Mandatory flash

Note: When the fill light is in automatic flash mode, it will only flash when taking photos in a relatively dark environment. When switched to forced flash mode, the  fill light will always be on.

Press the playback button to enter the media library. Select the video or photo file you want to view, then press the OK button to enter the corresponding file to view the video and image stored in the camera memory card.

Press the down button to delete a photo/video.

Note: Once deleted, it cannot be recovered.
Press the OK button to play/pause the video
Press the playback button to exit video/photo playback
Connect to computer
 Connect the Type-C USB port of the camera and the USB port of the computer with supp lied USB cable.

The camera will turn on automatically and the screen will display the available options.
Press the Up/Down button to select the desired option, then press the OK button to confirm the option.

Charging Mode
Select the charging mode, the camera supports the function of recording normally.  Power off the camera would be fully charged faster then keep powering on.
Mass Storage Mode
Select “Mass Storage Mode” and the computer will display the camera’s memory card drive. You can transfer files from the storage to the computer on the computer.

PC Camera
Select the “PC Camera” mode, the camera can be used as a webcam, live streaming, etc.
Note: When the camera is used as a webcam, only the digital zoom button can be operated on the camera and other functions cannot be used.

Camera cleaning and maintenance

If you do not use the camera for a long time, take out the camera battery and place it in a dust-free, dry environment with a temperature no higher than 30 ℃ .
In order to extend the service life of the battery, please discharge it completely before storage.
Please fully discharge the battery at least once every 3 months after it has been fully charged.
If there is dust or dirt on the lens or screen, gently wipe it with a clean, soft lens cleaning cloth.
As this machine is a precision instrument, please do not drop it or suffer from strong impact or vibration.
Troubleshooting

If you encounter problems with the camera, please refer to this section.

The camera cannot be turned on after installing the battery
The battery power is insufficient, please replace the battery with a new one or charge the battery.
The battery is installed in reverse, please confirm that the battery is installed in the correct way.
The battery insulating paper is not removed.
The battery is not charging
If the red light of the charging indicator flashes, the battery is not in place or the contact is poor. Please re-install the battery until the indicator light is on (the indicator light goes out when the battery is fully charged)
The charging indicator light is off and the charger is not plugged in properly. Please check whether the charger is connected normally.
The ambient temperature is lower than 10℃, which may lead to slow charging or failure to charge.
Camera crashes
Quickly pressing each button of the camera may cause the camera to freeze. After it crashes, unplug the battery and reboot.
Tip: When the camera is recording or taking pictures, do not quickly press the camera button. Under normal circumstances, the camera will display a waiting icon.
The memory card cannot be recognized:
Please check whether the memory card complies with Micro SD card (class10), the maximum is not more than 128G.
Please check whether the memory card is inserted backwards.
 When the memory card is used on the camera for the first time, it is recommended to format it first
Additional notes
Do not insert any object into the slot except the memory card.
After the power is turned on, the camera may show an unstable image about for a few seconds, but this is not a fault.
Due to the optical properties of the lens, there may be color dispersion (magnification of chromatic aberration) at the edges of the image. This is not a camera fault.
It is normal for the memory card to get hot after a long period of use.
It is normal for the camera’s screen to heat up after a long period of use.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement， the device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>