BLOCKCHAIN Bangtan TV 1000 User Guide
- June 3, 2024
- BLOCKCHAIN
Table of Contents
**BLOCKCHAIN Bangtan TV 1000 User Guide
**
Camera Introductions
Note. Press and hold the reset button for 10 s to reset the camera.
The pattern of the LED indicator is included in the following table.
| LED Indicator Status | Device Staus |
|---|---|
| Off | Powered off/LED turned off |
Rebooting after reset
Red light on| Booting
Device malfunction
Green light flashing| Waiting for network
Green light on| Operating properly
Red light flashing| Network connection failed
Green and Red light
flashing alternately| Firmware updating
Packing List
Troubleshooting
| Problem | Solution |
|---|---|
| Cannot set up camera | Ensure your mobile device and the camera are within |
range of your Wi-Fi router.
Ensure the LED indicator on the camera is flashing green before beginning
setup.
The APP says “Failed to
configure device network”| Reset your Camera and connect it again.
Some cameras only support 2.4GHz, while some routers have dual band, 2.4G/5G.
Make sure you are connecting 2.4GHz only.
The app says “Failed to bind”| The camera is already connected to Wi-Fi, but
the router is :
Not connected to Internet
Poor network status
The Wi-Fi signal is not stable due to obstacles or electronic interference
No picture / signal| Ensure the LED indicator on the camera is flashing steady
green. See ‘LED Status’ section for details if otherwise.
Ensure the camera is properly connected to power using the included USB power
adapter.
Try repositioning the camera, router, or both to improve signal strength.
Picture is not clear| Check the camera lens for dirt, dust, spider webs. Clean
the lens with a soft, clean cloth.
Remove the vinyl cover on the camera lens.
No audio| Ensure audio function on camera is turned on
Ensure audio is turned up on viewing device.
Human detection not working| Ensure you have enabled “Human Detection” in the
Device Settings screen of the Bangtan CCTV App.
Camera stuck downwards| Turn off Camera Shielding in Device Settings on the
Bangtan CCTV app.
Phone is not reading QR code| Clean the camera lens of your Smartphone
Ensure that there is enough light on the QR code
Don’t hold the QR code too close to the camera
Installing Camera
Note. Make sure the mounting surface is strong enough to hold at least three times of the device weight.
“BANGTAN CCTV” on Google Play / Apple Store Search and download the app.
BANGTAN CCTV
BANGTAN CCTV website (http://www.bangtan24.com) app user manual You can download it.
Precautions
To ensure the best possible wireless performance, please make sure there are no obstacles and electromagnetic interference between the camera and router.
Pushpull system 71-96, Taesan-ro, Yeondong-myeon, Sejong-si, 30067 Korea
E-Mail bangtan.cctv@gmail.com
Tel +82-1670-4519
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>