touchGOODS 1X Mini Alice Mushroom Lamp User Manual
- June 11, 2024
- touchGOODS
Table of Contents
touchGOODS 1X Mini Alice Mushroom Lamp
Thank you for your purchase of the Gingko Mini Alice Mushroom Lamp. Please read the instruction manual carefully to achieve the best performance of this product.
Product Content
Product Operation
-
When you first receive the lamp, you have to turn on the lamp by touching the copper button located at the front of the mushroom. The light will start on warm white mode as default. You can change the light mode by tapping the mushroom top. (PLEASE NOTE: IF
IF YOU CAN’T TURN IT ON, THEN PLEASE CHARGE IT FIRST) -
Once it’s turned on, tap with your hand on top of the mushroom shade to change the lighting mode to 7 colour-changing RGB mode.
The Mini Alice Mushroom Lamp has an auto memory function so the auto colour- changing mode will start rotating from your last chosen colour. -
Tap once again on the mushroom top shade of the Alice Mushroom Lamp to lock the light to the colour of your choice.
-
Tap again the top of the Alice Mushroom Lamp to turn it OFF. If you wish to permanently switch the lamp off, you can touch the copper Button.
Please note, that you will only need to touch the copper button to turn on the
light when it runs out of battery or if you permanently switch it off.
The mushroom lamp will be on standby mode once you have followed the above
steps so you can switch light mode by tapping the top of the mushroom.
Product Charging Instructions
The product usually arrives 70% charge, however, please fully charge
it before using it for the first time by following the below instructions:
- Take the USB charging cable out of the box underneath the product.
- Connect the USB charging cable to any USB plug adapter with a 5V output i.e. a smartphone charger or a USB port on the computer.
- Carefully connect it to the charging port on the product.
What is the Alice Mushroom Lamp Made Of
- We care for the environment as much as you and providing something which is sustainably designed and made is also our key product philosophy here at Gingko.
- The Alice mushroom Lamp is made of natural and sustainably sourced walnut or white ash wood.
- Some wood we used on this product may also be from recycled sources.
Warranty and Product Care
Warranty
This product is covered under a one-year manufacturer warranty starting from
the date of purchase. Within the warranty period, any repair service or
component replacement will be provided for free. Warranty does not apply to
the following circumstances:
- Product failure due to improper use, misuse, drops, abuse, alteration, faulty installation, power line surge or modification.
- Product failure due to acts of nature such as natural disasters, fire, flood, or casualty.
- Any damage caused to the charging port by user error is not covered by the manufacturer’s warranty.
Product Care
- The product is made of natural wood, any natural wood grain on the wood is not a product fault.
- Heavy drops or misuse of this product could cause damage to the device and the wooden exterior.
- You may use a damp cloth to clean the wooden exterior, however, do not have direct contact with water as this product is not waterproof.
- Only use 5V USB charging adaptors (Not included) for this product.
- Extra care is required with the lamp shade.
If you have any further queries about this product, please feel free to get in touch with us at [email protected]
Unit C23c, Holly Farm Business Park, Kenilworth,
- CV8 1NP, United Kingdom
- Copyright © Gingko Design Ltd www.gingkodesign.com
Proudly designed in Warwick, UK by Gingko Design Ltd
All rights registered
Made in China